Wheel-bearings easily acquire defects due to their high-speed operating conditions and constant metal-metal contact, so defect detection is of great importance for railroad safety. The conventional spectral kurtosis (SK) technique provides an optimal bandwidth for envelope demodulation. However, this technique may cause false detections when processing real vibration signals for wheel-bearings, because of sparse interference impulses. In this paper, a novel defect detection method with entropy, time-spectral kurtosis (TSK) and support vector machine (SVM) is proposed. In this method, the possible outliers in the short time Fourier transform (STFT) amplitude series are first estimated and preprocessed with information entropy. Then the method extends the SK technique to the time-domain, and extracts defective frequencies from reconstructed vibration signals by TSK filtering. Finally, the multi-class SVM was applied to classify bearing defects. The effectiveness of the proposed method is illustrated using real wheel-bearing vibration signals. Experimental results show that the proposed method provides a better performance in defect frequency detection and classification than the conventional SK-based envelope demodulation.
Large-volume cubic high-pressure apparatus is commonly used to produce synthetic diamond. Due to the high pressure, high temperature and alternative stresses in practical production, cracks often occur in the carbide anvil, thereby resulting in significant economic losses or even casualties. Conventional methods are unsuitable for crack detection of the carbide anvil. This paper is concerned with acoustic emission-based crack detection of carbide anvils, regarded as a pattern recognition problem; this is achieved using a microphone, with methods including sound pulse detection, feature extraction, feature optimization and classifier design. Through analyzing the characteristics of background noise, the cracked sound pulses are separated accurately from the originally continuous signal. Subsequently, three different kinds of features including a zero-crossing rate, sound pressure levels, and linear prediction cepstrum coefficients are presented for characterizing the cracked sound pulses. The original high-dimensional features are adaptively optimized using principal component analysis. A hybrid framework of a support vector machine with k nearest neighbors is designed to recognize the cracked sound pulses. Finally, experiments are conducted in a practical diamond workshop to validate the feasibility and efficiency of the proposed method.
This paper presents an active acoustic excitation method for leak detection of buried gas pipelines based on cavity resonance reflection. The principles of gas leakage in pipelines are analyzed, including the gas passage model and the gas cavity model. The principle of Helmholtz resonator is employed to establish the cavity model. For the cavity model, the relationships between cavity resonance frequency, acoustic impedance, sound pressure amplification and leakage damage size are derived. The resonant effect of the gas cavity on the acoustic signal is considered in this study to solve the problem that the echo signal after long distance propagation and reflection becomes very weak. Numerical simulations are conducted to demonstrate the relationships between acoustic reflection coefficient of the leak hole size, cavity volume and pipe wall thickness. In order to verify the effectiveness of the proposed method, a pipeline experimental rig with a length of 100 m is constructed. Sound waves are generated by a speaker and reflected echoes are received by a microphone. The cavity resonance reflection and echo characteristics of different leak hole size, different transmitting acoustic frequency and different cavity volume are analyzed. The EMD algorithm is used to decompose and reconstruct the echo signals to eliminate the noise interference in the pipeline system. An echo time-distance conversion method is used to visualize the locations of the leak hole and welds. Experimental results show that the proposed method can effectively detect the leak holes and welds in the pipeline.