Anaerobic bioelectrochemical digestion (ABD) is widely used for treating wastewater and recovering energy. The electrode is the key point for ABD system, which was sparsely studied with food waste. In this study, a carbon-modified copper foam was fabricated with copper foam and multiple wall carbon nanotubes (MWCNT) through electrophoretic deposition and screen-printing methods. The carbon-modified copper foam electrode was investigated in an ABD reactor for food waste. The features of bioelectrochemical methane production, process stability, and electrochemical characterization were evaluated in the ABD reactor, and were compared to the control reactor without equipping electrode. The ultimate methane production reached 338.1 mL CH₄/L in the ABD reactor, which was significantly higher than the 181.0 mL CH₄/L of the control reactor. The methane produced from the electrode was 137.8 mL CH₄/L, which was up to 40.8% of total methane production in the ABD reactor. It was attributed to the electroactive bacteria that were enriched and activated by the carbon-modified copper foam electrode, further activating the direct interspecies electron transfer (DIET) pathways for methane production. The cyclic voltammetry (CV) analysis showed higher redox peaks, which is one of the pieces of evidence for the enrichment of electroactive bacteria. The carbon-modified copper foam electrode has the advantages of both carbon and metal materials, and demonstrated a high possibility for use in bioelectrochemical methane production for food waste.

Direct interspecies electron transfer (DIET) between electroactive microorganisms (EAMs) offers significant potential to enhance methane production, necessitating research for its practical implementation. This study investigated enhanced methane production through DIET in an anaerobic digester bio-augmented with EAMs. A horizontal anaerobic digester (HAD) operated for 430 days as a testbed to validate the benefits of bioaugmentation with EAMs. Anaerobic digestate slurry, discharged from the HAD, was enriched with EAMs in a bioelectrochemical auxiliary reactor (BEAR) under an electric field. This slurry enriched with EAMs was then recirculated into the HAD. Results showed bio-augmentation with EAMs led to an increase in volatile solids removal from 56.2% to 77.5%, methane production rate from 0.59 to 1.00 L/L.d, methane yield from 0.26 to 0.34 L/g CODr, and biogas methane content from 59.9% to 71.6%. It suggests that bio-augmentation enhances DIET, promoting the conversion of volatile fatty acids to methane and enhancing resilience against kinetic imbalances. The enrichment of EAMs reached optimal efficacy under an electric field intensity of 2.07 V/cm with a mean exposure time of 2.53 days to the electric field in the BEAR. Bio-augmentation with externally enriched EAMs is a feasible and effective strategy to optimize anaerobic digestion processes.

Restoration potential (RP) and deterioration potential (DP) were formulated to shed light on the kinetic balance between anaerobic biochemical reactions. RP is gauged by the ratio of the methanogenesis rate (MR) to the acidogenesis rate (AR), while the DP is the sum of the accumulation rate (AcR) and dilution rate (DR) of total VFAs, normalized using the AR. In an anaerobic digester for a mixture of pulverized food waste and liquified sewage sludge, an RP above 1.0 signifies a restorative state in the kinetic balance of anaerobic biochemical reactions across various operational phases, including startup and steady state, and shifts in organic loading rate. Conversely, a DP value of 0.0 or higher denotes a deterioration in the kinetic balance. The instability index (ISI), calculated as the DP to RP ratio, serves as an indicator of an anaerobic digestion state. When the standard deviation of ISI surpasses 0.2, it signifies instability in biochemical reactions; however, an average ISI below 0.05 indicates a stable digestion process. The study underscores the efficacy of RP, DP, and ISI as robust indicators for assessing the stability of anaerobic digestion based on the kinetics of biochemical reactions.

Benzene is a typical volatile organic compound (VOC) and is found widely in industrial waste gases. In this study, trimesoyl chloride-melamine copolymer (TMP)-TiO₂ nanocomposites with excellent photocatalytic efficiency in visible-light degradation of gas-phase benzene were synthesized via an in situ hydrothermal synthesis. The optimal conditions for TMP-TiO₂ nanocomposite synthesis were determined by orthogonal experiments. The structural, physiochemical, and optoelectronic properties of the samples were studied by various analytical techniques. Ultraviolet-visible diffuse reflectance spectroscopy and surface photovoltage spectra showed that the positions of the light-absorbance edges of the TMP-TiO₂ nanocomposites were sharply red-shifted to the visible region relative to those of unmodified TiO₂. The most efficient TMP-TiO₂ nanocomposite was used for photocatalytic oxidative degradation of gas-phase benzene (initial concentration 230 mg m⁻³) under visible-light irradiation (380–800 nm); the degradation rate was 100% within 180 min. Under the same reaction conditions, the degradation rates of unmodified TiO₂ (hydrothermally synthesized TiO₂) and commercial material Degussa P25 were 19% and 23.6%, respectively. This is because the Ti–O–N and Ti–O–C bonds in TMP-modified TiO₂ reduce the band gap of TMP-TiO₂. The amide bonds in the TMP decrease the TiO₂ nanoparticle size and thus increased the specific surface area. The conjugated structures in the TMP provide abundant active sites for trapping photogenerated electrons and promote the separation and transfer of photogenerated electrons and holes.