Artificial LED source provides the possibility to regulate the lighting environment in plant factorys that use limited space to plant, aiming at high throughput and good quality. However, different parameters of light intensity, quality, and photoperiod will influence the growth and accumulation of bio-compounds in plants. In order to find the optimal setting of LED light for spinach planting, four group experiments were designed using the orthogonal testing method. According to the experimental results, for growth indexes including fresh weight, dry weight, root length and so on, photoperiod is the most influential factor, light intensity is the second, and light quality is the least. The best light mode (R:B = 4:1, photosynthetic photon flux density (PPFD) = 100 μmol∙m⁻²∙s⁻¹ and 13/11 h) among all eight possible combinations in the range was also determined. Furthermore, for quality indexes, including the soluble sugar content, protein content and so on, a new scoring method was introduced to make a comprehensive score for evaluating. Then, the light combination (R:B = 4:1, PPFD = 150 μmol∙m⁻²∙s⁻¹ and 9/15 h) in the range was found as the optimal scheme for spinach quality under those parameters. As there is trade-off between the optimal light parameters for growth and quality, it is necessary to achieve a balance between yield and quality of the plant during production. If farmers want to harvest spinach with larger leaf area and higher yield, they need to pay attention to the adjustment of the photoperiod and use a lower light intensity and a longer lighting time. If they do not mind the yield of the vegetable but want to improve the taste and nutrition of spinach products, they should pay more attention to the light intensity and use a higher light intensity and a shorter lighting time.

Wireless sensor networks equipped with rechargeable batteries are useful for outdoor environmental monitoring. However, the severe energy constraints of the sensor nodes present major challenges for long-term applications. To achieve sustainability, solar cells can be used to acquire energy from the environment. Unfortunately, the energy supplied by the harvesting system is generally intermittent and considerably influenced by the weather. To improve the energy efficiency and extend the lifetime of the networks, we propose algorithms for harvested energy prediction using environmental shadow detection. Thus, the sensor nodes can adjust their scheduling plans accordingly to best suit their energy production and residual battery levels. Furthermore, we introduce clustering and routing selection methods to optimize the data transmission, and a Bayesian network is used for warning notifications of bottlenecks along the path. The entire system is implemented on a real-time Texas Instruments CC2530 embedded platform, and the experimental results indicate that these mechanisms sustain the networks’ activities in an uninterrupted and efficient manner.

Strawberries are susceptible to various diseases during their growth, and leaves may show signs of diseases as a response. Given that these diseases generate yield loss and compromise the quality of strawberries, timely detection is imperative. To automatically identify diseases in strawberry leaves, a KTD-YOLOv8 model is introduced to enhance both accuracy and speed. The KernelWarehouse convolution is employed to replace the traditional component in the backbone of the YOLOv8 to reduce the computational complexity. In addition, the Triplet Attention mechanism is added to fully extract and fuse multi-scale features. Furthermore, a parameter-sharing diverse branch block (DBB) sharing head is constructed to improve the model’s target processing ability at different spatial scales and increase its accuracy without adding too much calculation. The experimental results show that, compared with the original YOLOv8, the proposed KTD-YOLOv8 increases the average accuracy by 2.8% and reduces the floating-point calculation by 38.5%. It provides a new option to guide the intelligent plant monitoring system and precision pesticide spraying system during the growth of strawberry plants.

Wireless sensor networks are widely used to acquire environmental parameters to support agricultural production. However, data variation and noise caused by actuators often produce complex measurement conditions. These factors can lead to nonconformity in reporting samples from different nodes and cause errors when making a final decision. Data fusion is well suited to reduce the influence of actuator-based noise and improve automation accuracy. A key step is to identify the sensor nodes disturbed by actuator noise and reduce their degree of participation in the data fusion results. A smoothing value is introduced and a searching method based on Prim’s algorithm is designed to help obtain stable sensing data. A voting mechanism with dynamic weights is then proposed to obtain the data fusion result. The dynamic weighting process can sharply reduce the influence of actuator noise in data fusion and gradually condition the data to normal levels over time. To shorten the data fusion time in large networks, an acceleration method with prediction is also presented to reduce the data collection time. A real-time system is implemented on STMicroelectronics STM32F103 and NORDIC nRF24L01 platforms and the experimental results verify the improvement provided by these new algorithms.

Target detection is a widely used application for area surveillance, elder care, and fire alarms; its purpose is to find a particular object or event in a region of interest. Usually, fixed observing stations or static sensor nodes are arranged uniformly in the field. However, each part of the field has a different probability of being intruded upon; if an object suddenly enters an area with few guardian devices, a loss of detection will occur, and the stations in the safe areas will waste their energy for a long time without any discovery. Thus, mobile wireless sensor networks may benefit from adaptation and pertinence in detection. Sensor nodes equipped with wheels are able to move towards the risk area via an adaptive learning procedure based on Bayesian networks. Furthermore, a clustering algorithm based on k-means++ and an energy control mechanism is used to reduce the energy consumption of nodes. The extended Kalman filter and a voting data fusion method are employed to raise the localization accuracy of the target. The simulation and experimental results indicate that this new system with adaptive energy-efficient methods is able to achieve better performance than the traditional ones.

Indoor localization based on wireless sensor networks (WSNs) is an important field of research with numerous applications, such as elderly care, miner security, and smart buildings. In this paper, we present a localization method based on the received signal strength difference (RSSD) to determine a target on a map with unknown transmission information. To increase the accuracy of localization, we propose a confidence value for each anchor node to indicate its credibility for participating in the estimation. An automatic calibration device is designed to help acquire the values. The acceleration sensor and unscented Kalman filter (UKF) are also introduced to reduce the influence of measuring noise in the application. Energy control is another key point in WSN systems and may prolong the lifetime of the system. Thus, a quadtree structure is constructed to describe the region correlation between neighboring areas, and the unnecessary anchor nodes can be detected and set to sleep to save energy. The localization system is implemented on real-time Texas Instruments CC2430 and CC2431 embedded platforms, and the experimental results indicate that these mechanisms achieve a high accuracy and low energy cost.