Rivets are usually used to connect the skin of an aircraft with joints such as frames and stringers, so the skin of the connection part is a porous structure. During the service of the aircraft, cracks appear in some difficult-to-detect parts of the skin porous structure, which causes great difficulties in the service life prediction and health monitoring of the aircraft. In this paper, a secondary development subroutine in PYTHON based on ABAQUS-XFEM is compiled to analyze the cracks that are difficult to monitor in the porous structure of aircraft skin joints. The program can automatically analyze the stress intensity factor of the crack tip with different lengths in the porous structure, and then the residual fatigue life can be deduced. For the sake of safety, the program adopts a more conservative algorithm. In comparison with the physical fatigue test results, the fatigue life of the simulation results is 16% smaller. This project provides a feasible simulation method for fatigue life prediction of porous structures. It lays a foundation for the subsequent establishment of digital twins for damage monitoring of aircraft porous structures.
The difference in the strengthening effect of different thickness reinforcement plates on an LY12 aluminum alloy central defect plate and the load distribution between the reinforcement plate and central defect plate in the reinforcement plate structure were studied. Through a method of equivalent transverse load in a small interval [a + Δa], the equivalent cyclic load of the central defect plate in the reinforced plate structure under different crack lengths was calculated, and then the distribution of the internal load of the reinforced plate structure with a different thickness with the crack propagation was solved. The secondary development program of the finite element software Abaqus was written in Python language, so that Abaqus software can solve the problem of high cycle fatigue. The finite element simulation of the different thickness-reinforced plate structure is carried out by this program. Through the output data, the equivalent cyclic load of the central defect plate in the reinforced plate structure under different crack lengths is calculated. Through three different fitting methods, the mathematical relationship between the equivalent cyclic load Δ and the crack length a at both ends of the central defect plate in the reinforced plate structure is described. Based on the mathematical relationship and the finite element output data, the fatigue crack propagation life of the reinforced plate structures with different thicknesses is calculated. It is found that, under the same crack conditions, with the increase in the thickness of the reinforced plate, the bearing load of the cracked plate decreases and the life of the cracked plate increases. With the expansion of the crack, the bearing load ratio of the reinforced plate increases. The simulation method is compared with the experimental results to verify its effectiveness.