Nowadays, the development of construction industry is one of the development indices of countries. On the other hand, development of construction industry is more urgent than ever with increased population and consequently, increased desire for urbanization. Considering the inadequacy of traditional and conventional systems for mass housing production, the approach to use modern industrial methods of building along with new technology and observance of the latest technical standards is critical. Therefore, the present study aimed to investigate and compare construction method of reinforced concrete cast in-situ walls and slabs with the conventional method of constructing concrete structures using MSP software. Studies show that the integrated wall and ceiling molding technique has been used since the late 1970s in the construction of high-rise residential towers. Currently, integrated wall and ceiling molding system is used as one of the methods in the construction of buildings with load-bearing wall and concrete ceiling. This method brings about improvements in quality, earthquake resistance, reduced run-time, reduced cost, quick return on investment, saving on materials consumption, reduced labor, eco-friendliness, sustainability and longer durability, reduced resource consumption, integrated structure, fire resistance, high flexibility, and employee safety.
23 August 2023 in Multiscale and Multidisciplinary Modeling, Experiments and Design
Today, considering the increased cases of terroristic operations, structural design engineers are starting to acknowledge blast-induced loads alongside other design parameters. Since a blast-induced load exhibits a much shorter period than the natural period of the structure, it is unlikely to induce general damages or stimulate the entire structure immediately after the loading, but rather local damages in individual structural elements are the common form of damage. These local damages, however, can set the scene for the gradual failure of the structure. The present study on structures with moment-resisting frames, buckling-restrained braces (BRBs), and conventional steel braces was conducted through an alternative load path (ALP, also known as column elimination) and exact modeling of the blast on the steel frames was undertaken using LS-DYNA software. In this work, the behavior of three five-story steel frames under a blast-induced load of 100 kg TNT equivalent at a distance of 10 m from the structural columns for a period of 100 ms was investigated. Results of analyzing the blast-induced effect on the frames showed that the frame equipped with buckling-restrained braces (BRB) exhibited improved overall peak displacement across the entire frame, peak induced velocity, and peak induced acceleration by 30%, 30%, and 46%, respectively, as compared to other steel frames exposed to blast loads.
The cast in-situ pile is a widely used type of deep foundations which its execution in civil projects is increasing daily. The use of ordinary concrete in this type of piles causes technical and executive problems, a decrease in the compressive strength (CS) of concrete, and an increase in the permeability under the ground level. But use of the self-compacting concrete in the cast in-situ piles while increasing the CS of concrete ensures proper compaction, increase in the execution speed, and easy placing of concrete. In this article, utilizing the data obtained from the laboratory results and also the application of soft computing techniques, predicting the degree of CS of self-compacting concrete (SCC) in concrete piles was investigated. To estimate the CS of SCC, a total number of 7 inputs were implemented. Then, using gene expression programming (GEP) a model was presented for estimating the CS of SCC in the cast in-situ piles. The results of the neural network showed a precision of 99.98% which exhibits the high accuracy of the model. The use of this model could greatly help persons, companies, and research centers in the preparation and construction of self-compacting concrete with the desired CS.
About Me
Ph.D. of Civil Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran.
Ph.D. of Civil Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran.