Electromagnetic wave absorbers have been investigated for many years with the aim of achieving high absorbance and tunability of both the absorption wavelength and the operation mode by geometrical control, small and thin absorber volume, and simple fabrication. There is particular interest in metal-insulator-metal-based plasmonic metamaterial absorbers (MIM-PMAs) due to their complete fulfillment of these demands. MIM-PMAs consist of top periodic micropatches, a middle dielectric layer, and a bottom reflector layer to generate strong localized surface plasmon resonance at absorption wavelengths. In particular, in the visible and infrared (IR) wavelength regions, a wide range of applications is expected, such as solar cells, refractive index sensors, optical camouflage, cloaking, optical switches, color pixels, thermal IR sensors, IR microscopy and gas sensing. The promising properties of MIM-PMAs are attributed to the simple plasmonic resonance localized at the top micropatch resonators formed by the MIMs. Here, various types of MIM-PMAs are reviewed in terms of their historical background, basic physics, operation mode design, and future challenges to clarify their underlying basic design principles and introduce various applications. The principles presented in this review paper can be applied to other wavelength regions such as the ultraviolet, terahertz, and microwave regions.
A wavelength selective uncooled infrared (IR) sensor using two-dimensional plasmonic crystals (2D PLCs) has been developed. The numerical investigation of 2D PLCs demonstrates that the wavelength of absorption can be mainly controlled by the period of the surface structure. A microelectromechanical systems-based uncooled IR sensor with 2D PLCs as the IR absorber was fabricated through a complementary metal oxide semiconductor and a micromachining technique. The selective enhancement of responsivity was observed at the wavelength that coincided with the period of the 2D-PLC absorber.
Wavelength- or polarization-selective thermal infrared (IR) detectors are promising for various novel applications such as fire detection, gas analysis, multi-color imaging, multi-channel detectors, recognition of artificial objects in a natural environment, and facial recognition. However, these functions require additional filters or polarizers, which leads to high cost and technical difficulties related to integration of many different pixels in an array format. Plasmonic metamaterial absorbers (PMAs) can impart wavelength or polarization selectivity to conventional thermal IR detectors simply by controlling the surface geometry of the absorbers to produce surface plasmon resonances at designed wavelengths or polarizations. This enables integration of many different pixels in an array format without any filters or polarizers. We review our recent advances in wavelength- and polarization-selective thermal IR sensors using PMAs for multi-color or polarimetric imaging. The absorption mechanism defined by the surface structures is discussed for three types of PMAs—periodic crystals, metal-insulator-metal and mushroom-type PMAs—to demonstrate appropriate applications. Our wavelength- or polarization-selective uncooled IR sensors using various PMAs and multi-color image sensors are then described. Finally, high-performance mushroom-type PMAs are investigated. These advanced functional thermal IR detectors with wavelength or polarization selectivity will provide great benefits for a wide range of applications.
21 September 2017 in IEEJ Transactions on Electrical and Electronic Engineering
Wavelength-selective uncooled infrared (IR) sensors are highly promising for a wide range of applications, such as fire detection, gas analysis and biomedical analysis. We have recently developed wavelength-selective uncooled IR sensors using square lattice two-dimensional plasmonic absorbers (2-D PLAs). The PLAs consist of a periodic 2-D lattice of Au-based dimples, which allow photons to be manipulated using surface plasmon modes. In the present study, a detailed investigation into control of the detection wavelength was conducted by varying the PLA lattice structure. A comparison was made between wavelength-selective uncooled IR sensors with triangular and square PLA lattices that were fabricated using complementary metal oxide semiconductor and micromachining techniques. Selective enhancement of the responsivity could be achieved, and the detection wavelength for the triangular lattice was shorter than that for the square lattice. The results indicate that the detection wavelength is determined by the reciprocal-lattice vector for the PLAs. The ability to control the detection wavelength in this manner enables the application of such PLAs to many types of thermal IR sensors. The results obtained here represent an important step towards multi-color imaging in the IR region.
Wavelength-selective infrared (IR) absorbers have attracted considerable interest due to their potential for a wide range of applications. In particular, they can be employed as advanced uncooled IR sensors that identify objects through their radiation spectra. Herein, we propose a mushroom plasmonic metamaterial absorber incorporating tube-shaped metal posts (MPMAT) for use in the long-wavelength IR (LWIR) region. The MPMAT design consists of a periodic array of thin metal micropatches connected to a thin metal plate via tube-shaped metal posts. Both the micropatches and posts can be constructed simultaneously as a result of the tube-shaped structure of the metal post structure; thus, the fabrication procedure is both simple and low cost. The absorption properties of these MPMATs were assessed both theoretically and experimentally, and the results of both investigations demonstrated that these devices exhibit suitable levels of LWIR absorption regardless of the specific tube-shaped structures employed. It was also found to be possible to tune the absorption wavelength by varying the micropatch width and the inner diameter of the tube-shaped metal posts, and to obtain absorbance values of over 90%. Focal plane array structures based on such MPMATs could potentially serve as high-performance, low-cost, multi-spectral uncooled IR image sensors.