Uniaxial compressive strength (UCS) and the static Young’s modulus (E_s) are fundamental parameters for the effective design of engineering structures in a rock mass environment. Determining these two parameters in the laboratory is time-consuming and costly, and the results may be inappropriate if the testing process is not properly executed. Therefore, most researchers prefer alternative methods to estimate these two parameters. This work evaluates the thermal effect on the physical, chemical, and mechanical properties of marble rock, and proposes a prediction model for UCS and E_S using multi-linear regression (MLR), artificial neural networks (ANNs), random forest (RF), and k-nearest neighbor. The temperature (T), P-wave velocity (P_V), porosity (η), density (ρ), and dynamic Young’s modulus (E_d) were taken as input variables for the development of predictive models based on MLR, ANN, RF, and KNN. Moreover, the performance of the developed models was evaluated using the coefficient of determination (R²) and mean square error (MSE). The thermal effect results unveiled that, with increasing temperature, the UCS, E_S, P_V, and density decrease while the porosity increases. Furthermore, ES and UCS prediction models have an R² of 0.81 and 0.90 for MLR, respectively, and 0.85 and 0.95 for ANNs, respectively, while KNN and RF have given the R² value of 0.94 and 0.97 for both E_S and UCS. It is observed from the statistical analysis that P-waves and temperature show a strong correlation under the thermal effect in the prediction model of UCS and E_S. Based on predictive performance, the RF model is proposed as the best model for predicting UCS and E_S under thermal conditions.

The risk of a coal burst rises with the excavation depth and other mining-related activities. These devastating coal burst activities are a major concern during deep coal mining. During such activities, the loading rate is a major cause of damage. Different indexes, including the elastic strain modulus index (W_et), bursting energy index (K_e), dynamic failure time index (D_T), and compressive strength index (R_c), are used for coal bursting intensity; however, the loading rate and damage factors are not included in these indexes. In this study, a new coal bursting liability index called the elastic modulus damage index (EMDI) was developed using rock damage variables and the elastic strain modulus index, and is based on energy evolution characteristics under different loading rates. The results of this new index were compared with the existing indexes, and their range was proposed to evaluate coal bursting liability. The EDMI shows a positive polynomial second order degree relationship with W_et and K_e, having a determination factor of 0.99, while D_T shows a negative polynomial second order degree relationship with a determination factor of 0.94. The EDMI and R_c show a positive power relationship having a determination factor of 0.99. The relationships with other indexes revealed that the EDMI can be effectively used in evaluating the coal bursting liabilities in different stress environments.

The geological strength index (GSI) is one of the most exceptional rock mass classification system which is used to evaluate very weak and highly jointed rock mass by different approaches and related to rock mass geomechanical properties including generalized Hoek & Brown constants, deformation modulus, strength properties, and Poisson’s ratio for an appropriate design of tunnels, caverns, and other engineering structures. The distinctiveness of this system over the rock mass rating (RMR), Q‐system, and other empirical methods is as follows: it utilized field observations, blockiness of rock mass, and surface joint characteristics during the evaluation process of rock mass and efficiently espoused as an empirical tool for estimation of geomechanical properties of rock mass required for pre‐post stability of engineering structures using numerical modeling. This study presents the review of the 19 years of research studies conducted by different researchers about the GSI in a systematic way, i.e., origination, modifications, applications, and limitations. Furthermore, this study will provide a better understanding to field professionals (geologists, mining and civil engineers) about the qualitative and quantitative estimation of the GSI and its application as an empirical estimating tool for an appropriate design of engineering structures in rock mass environments.

Rock strength, specifically the uniaxial compressive strength (UCS), is a critical parameter mostly used in the effective and sustainable design of tunnels and other engineering structures. This parameter is determined using direct and indirect methods. The direct methods involve acquiring an NX core sample and using sophisticated laboratory procedures to determine UCS. However, the direct methods are time-consuming, expensive, and can yield uncertain results due to the presence of any flaws or discontinuities in the core sample. Therefore, most researchers prefer indirect methods for predicting rock strength. In this study, UCS was predicted using seven different artificial intelligence techniques: Artificial Neural Networks (ANNs), XG Boost Algorithm, Random Forest (RF), Support Vector Machine (SVM), Elastic Net (EN), Lasso, and Ridge models. The input variables used for rock strength prediction were moisture content (MC), P-waves, and rebound number (R). Four performance indicators were used to assess the efficacy of the models: coefficient of determination (R²), Root Mean Square Error (RMSE), Mean Square Error (MSE), and Mean Absolute Error (MAE). The results show that the ANN model had the best performance indicators, with values of 0.9995, 0.2634, 0.0694, and 0.1642 for R², RMSE, MSE, and MAE, respectively. However, the XG Boost algorithm model performance was also excellent and comparable to the ANN model. Therefore, these two models were proposed for predicting UCS effectively. The outcomes of this research provide a theoretical foundation for field professionals in predicting the strength parameters of rock for the effective and sustainable design of engineering structures