The production of municipal solid waste (MSW) represents one of the greatest challenges currently faced by waste managers all around the world. In Brazil, the situation with regard to solid waste management is still deficient in many aspects. In 2015, only 58.7% of the MSW collected in Brazilian cities received appropriate final disposal. It was only as late as 2010 that Brazil established the National Policy on Solid Waste (NPSW) based on the legislation and programmes established in the 1970s in more developed countries. However, the situation with regard to MSW management has changed little since the implementation of the NPSW. Recent data show that, in Brazil, disposal in sanitary landfills is practically the only management approach to MSW. Contrary to expectations, despite the economic recession in 2015 the total annual amount of MSW generated nationwide increased by 1.7%, while in the same period the Brazilian population grew by 0.8% and economic activity decreased by 3.8%. The article describes the panorama with regard to MSW in Brazil from generation to final disposal and discusses the issues related to the delay in implementing the NPSW. The collection of recyclable material, the recycling process, the application of reverse logistics and the determination of the gravimetric composition of MSW in Brazil are also addressed in this article. Finally, a brief comparison is made between MSW management in Brazil and in other countries, the barriers to developing effective waste disposal systems are discussed and some recommendations for future MSW management development in Brazil are given.
The objective of this research was to evaluate the air stripping technology for the removal of ammonia from landfill leachates. In this process, pH, temperature, airflow rate and operation time were investigated. Furthermore, the relationship between the leachate alkalinity and the ammonia removal efficiency during the process was studied. The leachate used in the tests was generated in the Gramacho Municipal Solid Waste Landfill (Rio de Janeiro State, Brazil). The best results were obtained with a temperature of 60oC, and they were independent of the pH value for 7 h of operation (the ammonia nitrogen removal was greater than 95%). A strong influence of the leachate alkalinity on the ammonia nitrogen removal was observed; as the alkalinity decreased, the ammonia concentration also decreased because of prior CO2 removal, which increased the pH and consequently favored the NH3 stripping. The air flow rate, in the values evaluated (73, 96 and 120 L air.h−1. L−1 of leachate), did not influence the results.
1 July 2015 in Journal of Petroleum Science and Engineering