静 Cui

Dr. 静 Cui


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 June 2015 in Energies
Verified
Journal Article
Open access
PDF file
静C静 Cui
静 Cui
YCYanyu Cui
Yanyu Cui
The surface characteristics, such as wettability and roughness, play an important role in heat transfer performance in the field of microfluidic flow. In this paper, the process of a hot liquid flowing through a microchannel with cold walls, which possesses different surface wettabilities and microstructures, is simulated by a transient double-distribution function (DDF) two-phase thermal lattice Boltzmann BGK (LBGK) model. The Shan-Chen multiphase LBGK model is used to describe the flow field and the independent distribution function is introduced to solve the temperature field. The simulation results show that the roughness of the channel wall improves the heat transfer, no matter what the surface wettability is. These simulations reveal that the heat exchange characteristics are directly related to the flow behavior. For the smooth-superhydrophobic-surface flow, a gas film forms that acts as an insulating layer since the thermal conductivity of the gas is relatively small in comparison to that of a liquid. In case of the rough-superhydrophobic-surface flow, the vortex motion of the gas within the grooves significantly enhances the heat exchange between the fluid and wall.

1 June 2024 in Advances in Aerodynamics
Verified
Journal Article
Open access
PDF file
静C静 Cui
静 Cui
SNShuxin Niu
Shuxin Niu
GYGuangfeng Yang
Guangfeng Yang
Spraying de-icing fluid is a key method to ensure the safe operation of aircraft in icy and snowy weather. The film aggregation and internal mixing of de-icing fluid droplets on the aircraft skin during a collision are crucial. Considering the rheological properties of the molecular viscosity change of the de-icing fluid droplets during the collision and the heat transfer model of the heat loss after the impact, the phase field method is used to capture the gas–liquid interface, and a thermal pressure/viscous coupling model is constructed. The thermodynamic behavior of different axial distances is calculated. The results show that, as the dimensionless axial distance of the droplet increases, the spreading length of the fused droplet decreases instead, and the heat transfer rate of the droplet increases with the increase in spreading length. After stabilizing, the increase or decrease in the heat transfer rate depends on the strength of the heat transfer between the liquid layers. As the dimensionless axial distance increases, the internal flow of the droplet weakens and, between the droplet and the wall, the heat flux density gradually decreases and the average temperature drop of the droplet becomes gradual.

7 December 2024 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
静C静 Cui
静 Cui
DJDezheng Jiang
Dezheng Jiang
ZXZhiwei Xing
Zhiwei Xing
GYGuangfeng Yang
Guangfeng Yang

15 October 2024 in Meccanica
Verified
Journal Article
Closed access
PDF file
静C静 Cui
静 Cui
YCYihao Chang
Yihao Chang
ZXZhiwei Xing
Zhiwei Xing
GYGuangfeng Yang
Guangfeng Yang

13 September 2025 in Results in Engineering
Verified
Journal Article
Open access
静C静 Cui
静 Cui
YZYuhang Zhang
Yuhang Zhang
CYChen Yongxing
Chen Yongxing
GYGuangfeng Yang
Guangfeng Yang

11 February 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
PZPan Zhang
Pan Zhang
JWJianing Wang
Jianing Wang
GYGuang-Feng Yang
Guang-Feng Yang
静C静 Cui
静 Cui
Proton exchange membrane fuel cells are widely used in the field of unmanned aerial vehicles due to their superior range and environmental performance. To ensure the performance of PEMFC batteries, a topology-optimized liquid cooling plate based on a symmetrical vein initial solution was designed. The flow channel structure was obtained through topology optimization using a dual objective function aimed at maximizing heat transfer and minimizing fluid dissipation. The influence of the objective function weight ratio and inlet velocity on the heat dissipation performance of the topology-optimized liquid cooling plate was analyzed in a three-dimensional numerical model. The heat dissipation performance was compared with that of liquid cooling plates with parallel flow channels, serpentine flow channels, and symmetrical vein flow channels. The conclusions are as follows: the liquid cooling plate exhibits the best overall heat dissipation performance when the objective function weight ratio is 0.5:0.5. While heat transfer performance increases with increasing inlet velocity, system energy consumption also increases. Comparison of comprehensive performance indicators revealed that the liquid cooling plate exhibits the best heat dissipation performance when the inlet velocity is 0.16 m/s. Comparison with liquid cooling plates with PC, SFC and LFC flow channels showed that the topology-optimized structure has the lowest average temperature, highest temperature, temperature difference, and inlet/outlet pressure drop, and exhibits the best overall heat dissipation performance, demonstrating the effectiveness of the topology optimization method based on the initial flow channel.