Fast permeation and effective solute-solute separation provide the opportunities for sustainable water treatment, but they are hindered by ineffective membranes. We present here the construction of a nanofiltration membrane with fast permeation, high rejection, and precise Cl-/SO42- separation by spatial and temporal control of interfacial polymerization via graphitic carbon nitride (g-C3N4). The g-C3N4 nanosheet binds preferentially with piperazine and tiles the water-hexane interface as revealed by molecular dynamics studies, thus lowering the diffusion rate of PIP by one order of magnitude and restricting its diffusion pathways towards the hexane phase. As a result, membranes with nanoscale ordered hollow structure are created. Transport mechanism across the structure is clarified using computational fluid dynamics simulation. Increased surface area, lower thickness, and a hollow ordered structure are identified as the key contributors to the water permeance of 105 L m2·h−1·bar−1 with a Na2SO4 rejection of 99.4% and a Cl-/SO42- selectivity of 130, which is superior to state-of-the-art NF membranes. Our approach for tuning the membrane microstructure enables the development of ultra-permeability and excellent selectivity for ion-ion separation, water purification, desalination, and organics removal.
Polymer crosslinking imbues chemical stability to thin films at the expense of lower molecular transportation rates. Here in this work we deployed molecular dynamics simulations to optimise the selection of crosslinking compounds that overcome this trade-off relationship. We validated these simulations using a series of experiments and exploited this finding to underpin the development of a pervaporation (PV) desalination thin-film composite membrane with water fluxes reaching 234.9 ± 8.1 kg m−2 h−1 and salt rejection of 99.7 ± 0.2 %, outperforming existing membranes for pervaporation and membrane distillation. Key to achieving this state-of-the-art desalination performance is the spray coating of 0.73 μm thick crosslinked dense, hydrophilic polymers on to electrospun nanofiber mats. The desalination performances of our polymer nanocomposites are harnessed here in this work to produce freshwater from brackish water, seawater and brine solutions, addressing the key environmental issue of freshwater scarcity.
Three vinyl functionalized imidazolium based room-temperature ionic liquids (RTILs): 1-vinyl-3-ethylimidazolium dicyanamide ([veim][dca]), 1-vinyl-3-butylimidazolium dicyanamide ([vbim][dca]) and 1-vinyl-3-heptylimidazolium dicyanamide ([vhim][dca]) were synthesized and UV-polymerized to form free standing membranes. The pure gas permeabilities of CO2 and N2 of these newly developed membranes acquired at 1 atm 35 °C increased with an increase in the number of N-alkyl group in the monomers but their ideal CO2–N2 selectivities decreased. The three vinyl functionalized monomers were blended with three free RTILs: 1-ethyl-3-methylimidazolium dicyanamide ([emim][dca]), 1-ethyl-3-methylimidazolium tetracyanoborate ([emim][B(CN)4]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF4]) and subsequently subjected to UV-polymerization to form the poly(RTIL)–RTIL composite membranes. The incorporation of free RTILs not only significantly increases the CO2 permeability but also greatly improves the CO2–N2 selectivity. The best separation performance is achieved for the poly([vbim][dca])–[emim][B(CN)4] (1 : 2) and poly([vbim][dca])–[emim][dca] (1 : 2) composite membranes, which have CO2 permeabilities of 340 and 273 barrers and CO2–N2 selectivities of 42 and 53, respectively, at 1 atm 35 °C. The mixed gas permeabilities of these two composite membranes are 297 and 253.5 barrers with corresponding CO2–N2 selectivities of 38.8 and 50.6, respectively, using a 50 : 50 CO2–N2 mixed gas at 2 atm 35 °C. These two composite membranes have separation performance very close to the 2008 “Robeson Upper Bound”, suggesting their potential for industrial applications, especially for the post-combustion flue gas treatment.