Imtiaz Ahamed Apon

Mr. Imtiaz Ahamed Apon


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2024 in International Journal of Energy Research
Verified
Journal Article
Open access
MHM. D. Ratul Hasan
M. D. Ratul Hasan
IAImtiaz Ahamed Apon
Imtiaz Ahamed Apon
IOIstiak Ahmed Ovi
Istiak Ahmed Ovi
F-Fatema-Tuz -Zahra
Fatema-Tuz -Zahra
Semiconductor behavior has emerged as a promising substance for numerous advancements in natural energy production, storage, and conversion, as well as in medical technology due to exceptional properties and capabilities of the perovskites. Additionally, this property also presents a great opportunity for solar cells to serve as a substitute for conventional silicon‐based photovoltaic systems, as they provide greater efficiency and cost‐effective conversion of sunlight to electricity. Here, we are for the first time investigating lead‐free environment‐friendly cubic perovskites ASnX3 (A = Na and Li; X = Cl, Br, and I) under different hydrostatic pressures ranging from 0 to 5 GPa. Utilizing the GGA + PBE functional method with a space group of 221 (Pm3m), ASnX3 compounds (A = Na and Li; X = Cl, Br, and I) demonstrate direct bandgaps at 0 GPa, ranging from 0.790 to 0.282 eV for Li‐based halides and 0.760–0.296 eV for Na‐based halides, characterizing their semiconductor nature within the perovskite crystal lattice. Furthermore, our analysis revealed that the conduction band and the valence band intersect at a point above the Fermi level which influences the transition of semiconductor to metal or the creation of a half‐metallic state. The optical and structural properties of the compound were also examined, and as the pressure rose from 0 to 5 GPa, the absorption redshift occurred. The analysis of magnetic properties revealed that ASnX3 (A = Na and Li; X = Cl, Br, and I) compounds have diamagnetic behavior in both normal and under pressure conditions. Meanwhile, compounds that satisfy mechanical stability requirements up to certain pressures demonstrate alternations in bulk modulus, shear modulus, and Young’s modulus. The compounds show ductile behavior as their Poisson’s ratio values range between 0.28 and 0.44 for every compound. Increasing pressure increases the values of the compounds, but the compounds remain in the same range of ductile material and show better ductility. Finally, increasing pressure influences the characteristics of the compounds as I‐based compounds change phase transitions from semiconductor behavior to metallic behavior. On the other hand, Cl‐based and Br‐based compounds show semimetallic behavior for increased pressure.

1 March 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
MHM. D. Ratul Hasan
M. D. Ratul Hasan
IAImtiaz Ahamed Apon
Imtiaz Ahamed Apon
IOIstiak Ahmed Ovi
Istiak Ahmed Ovi
MHMohammad Salman Haque
Mohammad Salman Haque
Using first-principles calculations based on density functional theory, this work investigated the mechanical, magnetic, elastic, electrical, and optical characteristics of the halide-based perovskite FrGeX3 (X = Cl, Br, I) at different hydrostatic pressures ranging from 0 to 9 GPa. It was determined that the compound FrGeX3 (X = Cl, Br, I) is stable and ductile in nature by calculating its thermodynamic and mechanical stability using the parameters of its formation enthalpy and elastic constant. When no hydrostatic pressure is applied, the band computations reveal that FrGeCl3, FrGeBr3, and FrGeI3 all remain in the semiconductor region with bandgaps of 1.14, 0.8, and 0.645 eV, respectively. The study examined how increasing induced pressure affects the bandgap and density of states of the structure for all three halides. The bandgap of FrGeCl3, FrGeBr3, and FrGeI3 fell to 0 eV at 9, 6, and 5 GPa, respectively. In addition, the optical absorption, reflectivity, refractive index, and imaginary and real components of dielectric functions were all studied in detail for cubic perovskites FrGeX3 (X = Cl, Br, I) under varying hydrostatic pressures, from 0 to 9 GPa. Due to increased pressure, the compound transitioned into a conductor and improved its absorption capabilities for all compounds within the 8–14 eV range, making it suitable for use in the UV spectrum. Cl has the largest absorption among all compounds, whereas I displays the lowest. Reflectivity ranges from around 14% to 18% for all compounds and increases w%ith pressure. The actual component of the refractive index ranges from around 2.25 to 2.7 at 0 eV and increases with pressure. Chlorine has a low refractive index, whereas iodine demonstrates the greatest. The highest fluctuation is shown for Br. The dielectric characteristics vary from around 5 to 7.5 F/m. Chlorine (Cl) has the least charge storage capacity, while iodine (I) demonstrates the most, of which both increase with pressure in all compounds. Structure FrGeX3 (X = Cl, Br, I) is hardened and made more ductile by applying hydrostatic pressure, as seen by the increasing bulk, Young’s, and shear modulus values, as well as the elastic constants (C11 and C12). While the electrons were in a co-linear position, the magnetic property was also studied by optimizing the band structure and density of states. The diamagnetic property of the combination FrGeX3 (where X = Cl, Br, I) remained unchanged even when subjected to increased pressure. According to the findings, this perovskite material has remarkable absorption properties, which point to a change in its behavior from semiconductor to metal. Their potential uses in solar cells, UV absorbers, and optoelectronic devices are highlighted by these computational results.

1 June 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
IAImtiaz Ahamed Apon
Imtiaz Ahamed Apon
MHM. D. Ratul Hasan
M. D. Ratul Hasan
IOIstiak Ahmed Ovi
Istiak Ahmed Ovi
FZFatema- Tuz- Zahra
Fatema- Tuz- Zahra
The objective of our study was to analyze the mechanical, magnetic, elastic, electrical, and optical characteristics of the halide-based perovskite FrSnX3 (X = Cl, Br, and I) at hydrostatic pressures ranging from 0 to 6 GPa. We conducted this analysis using first-principles calculations based on density functional theory. The thermodynamic and mechanical stability of the complex FrSnX3 (X = Cl, Br, and I) were calculated based on its formation enthalpy and elastic constant characteristics. The compound was found to be ductile and stable. FrSnCl3, FrSnBr3, and FrSnI3 are all classified as semiconductors according to band calculations. Their respective bandgaps are 1.046, 0.675, and 0.485 eV, respectively. These values remain constant when hydrostatic pressure is not applied. The bandgap and density of states of the three halides were examined to observe their variations with increasing induced pressure. The bandgaps of FrSnCl3, FrSnBr3, and FrSnI3 were measured to be 0 eV at pressures of 6, 4, and 2 GPa, respectively. In addition, a comprehensive study was conducted on the optical properties of cubic perovskites FrSnX3 (X = Cl, Br, and I) under different hydrostatic pressures ranging from 0 to 6 GPa. The investigation focused on analyzing the optical absorption, reflectivity, and refractive index, as well as the imaginary and real components of the dielectric functions. Under high pressure, the compound exhibited higher absorption capabilities for all compounds within the 10–13 eV range, transforming into a conductor. This property makes it well-suited for utilization in the UV spectrum. Chlorine exhibits the greatest absorption among all chemicals, whereas iodine demonstrates the least absorption. The reflectance values of all compounds range from 12% to 16% and increase with increasing pressure. At the energy level of zero, the refractive index’s real component ranges from 1.25 to 1.7, and it increases with increasing pressure. Chlorine has a relatively low refractive index compared to iodine. Bromine has the most pronounced variance. The dielectric characteristics typically vary from 4.5 to 7.5 F/m. As pressure increases, the charge storage capacities of all compounds increase. However, among these compounds, iodine has the highest capacity, while chlorine (Cl) has the lowest. The hydrostatic pressure applied to the structure FrSnX3 (X = Cl, Br, and I) causes it to become harder and more ductile. This is evident from the increasing values of the bulk, Young’s, and shear modulus, as well as the elastic constants (C11 and C12). We optimized the band structure and density of states by aligning the electrons in a co-linear location and assessed the magnetic properties. The diamagnetic characteristic of the FrSnX3 compound (where X = Cl, Br, and I) remained unchanged when subjected to increasing pressure. The results indicate that the perovskite material has exceptional absorption properties, indicating a change in its behavior from a transistor to a metal. The numerical findings highlight the potential applications of this material in photovoltaic cells, ultraviolet light absorbers, and optoelectronic devices.

1 June 2024 in Materials Research Express
Verified
Journal Article
Open access
IOIstiak Ahmed Ovi
Istiak Ahmed Ovi
RHRatul Hasan
Ratul Hasan
IAImtiaz Ahamed Apon
Imtiaz Ahamed Apon
FZFatema-Tuz Zahra
Fatema-Tuz Zahra
This study examines the physical properties of germanium-based halide perovskite through Density Functional Theory (DFT) computations. The physical, optical, mechanical, and magnetic properties of NaGeX3 (X = Cl, Br, and I) were examined with the effects of hydrostatic pressure applied externally. The compounds were subjected to pressure variations ranging from 0 to 5 GPa. The results indicate a decrease in the band gap from the infrared to the visible spectrum. For NaGeCl3, NaGeBr3, and NaGeI3 the band gap decreased from 0.766 eV, 0.497 eV, and 0.400 eV to 0 eV, respectively, indicating the metallic behavior. The mechanical properties of NaGeX3 (X = Cl, Br, and I) demonstrate that for all three compounds, Bulk Modulus (B), Shear Modulus (G), Young’s Modulus (E), Poisson’s ratio (ν), and Pugh’s ratio B / G all increase with increasing pressure. It demonstrates that all these NaGeX3 (X = Cl, Br, I) compounds are ductile in nature. The compounds are determined to be diamagnetic based on their magnetic property investigation, which reveals no notable changes in behavior up to 5 GPa of rising pressure. To gain a better understanding of the properties of the material when incident light strikes its surface, researchers also looked in at optical absorption, reflectivity, dielectric constants, refractive index, conductivity, and loss functions. Pressure-induced NaGeX3 perovskite compounds, where X = Cl, Br, and I, show an increase in dielectric constant as pressure rises, suggesting a decrease in charge carrier recombination rates and a possibility for higher optoelectronic device efficiency. For all NaGeX3 compounds (where X = Cl, Br, and I), the maximum absorption coefficient peaks are located around 3 eV, indicating that increasing pressure increases optical conductivity. Additionally, they have significantly low reflectance throughout the visible spectrum and very narrow band gap, which indicates significant absorption and the possibility of effective Near-Infrared (NIR) Sensors, photodetector etc applications.

1 November 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
RHRatul Hasan
Ratul Hasan
IAImtiaz Ahamed Apon
Imtiaz Ahamed Apon
MIMafidul Islam
Mafidul Islam
AAAsab Uzzaman Azad
Asab Uzzaman Azad
AMAminuzzman
Aminuzzman
SHSalman Haque
Salman Haque
Lead halide perovskites have distinct physiochemical properties and demonstrate remarkable power conversion efficiency. We used density functional theory to investigate the electrical, optical, structural, and elastic features of non-toxic InGeCl3 and InGeBr3 halide perovskite compounds at different hydrostatic pressures, from 0 to 8 GPa. InGeCl3 and InGeBr3 halide perovskite exhibit noteworthy changes in their electronic and optical properties under different pressure conditions. When the pressure is 0 GPa, the direct bandgap for InGeCl3 is 0.886 eV, and for InGeBr3 it is 0.536 eV. This gap decreases as the pressure rises. Specifically, InGeBr3 exhibits conducting properties at 3 GPa due to its larger bromine atoms, whereas InGeCl3 requires a higher pressure of 6 GPa to achieve similar conductivity. This type of nature suggests that larger halogen atoms reduce the bandgap more effectively under pressure. As the pressure increases, the behavior of the lattice constant and unit cell volume decreases constantly, from 5.257 and 145.267 Å3 for InGeCl3 to 5.509 and 167.168 Å3 for InGeBr3 at 0 GPa for both compounds. When subjected to pressure, the bonds between In-X and Ge-X atoms experience compression, leading to a decrease in surface area and an enhancement in mechanical strength. Overall, the compounds exhibit characteristics of semiconductors, as evidenced by evaluations of their electrical properties. As pressure increases, the bandgap decreases linearly, narrowing until it aligns with the Fermi level, leading to a transition toward a metallic state. In addition, the pressure induces a rise in the electrical density of states around the Fermi level by displacing valence band electrons in an upward direction. As pressure increases, the electron density peak shifts to lower photon energy values. Notably, InGeCl3 exhibits a more pronounced shift in this peak compared to InGeBr3, indicating greater sensitivity to pressure. In terms of optical properties, both compounds demonstrate significant absorption coefficients in the visible region, suggesting their potential suitability for photovoltaic applications. The dielectric constant, absorption, and reflectivity values all increase gradually as pressure increases. The absorption spectra shift toward longer wavelengths. Furthermore, the mechanical properties analysis reveals that all InGeX3 compounds are mechanically stable up to 8 GPa pressure.

10 May 2025 in Journal of Inorganic and Organometallic Polymers and Materials
Verified
Journal Article
Closed access
PDF file
IAImtiaz Ahamed Apon
Imtiaz Ahamed Apon
SJSiam Jubayer
Siam Jubayer
RBRabah Boudissa
Rabah Boudissa
RKRiyad Kawsar
Riyad Kawsar
RRRifat Rafiu
Rifat Rafiu
Noureddine ElboughdiriNoureddine Elboughdiri
Noureddine Elboughdiri