The Ni60-SiC-CeO2 strengthening layer with deep remelting pools was constructed on the surface of 7075 aluminum alloy using the laser remelting-cladding processing method, and a soft and hard interphase was prepared on the matrix by the interval of laser remelting, which was inspired by soft–hard interphase structure with excellent crack inhibition performance from the natural world. The microstructure and microhardness of the remelting region and the remelting-cladding region of the strengthening layer were studied. The tensile characteristics of two distinct strengthening layers were investigated in the laboratory. The results showed that the grain size of remelting pools is finer, and the microhardness is higher than that of the matrix, which makes crack propagation more difficult. In addition, the results show that the strengthening layer has compact and flawless microstructure and has been metallurgically integrated with the matrix, and the microhardness of the regions treated by laser cladding and laser remelting-cladding has been improved obviously. Toughness has improved, as has the problem of toughness reduction after cladding ceramic particles. The sample’s strength is also significantly greater than that of the untreated sample.
In the context of energy conservation and emission reduction, more and more attention has been paid to the development of lightweight metal materials with both high strength and high toughness. Inspired by the non-smooth surface of natural organisms, a biomimetic surface with various spacing reticulate units of 7075 aluminum alloys was modified by laser cladding. The microstructure, microhardness and tensile properties of the various spacing units with CeO2-SiC-Ni60 were studied. The finer microstructure and the higher microhardness of various spacing units in comparison with that of 7075 aluminum alloys were obtained, no matter the strip-like treated region or the cross-junction region. Moreover, the best combination of strength and toughness of the biomimetic sample with 2.5 mm spacing reticulate unit was discussed. Finally, by combining the microstructure, XRD phase change, thermal gradient effect, thermal expansion coefficient difference and hard phase strengthening mechanism, it was concluded that the 2.5 mm spacing reticulate unit had the best ability to inhibit crack propagation, and the dispersive hard phases of Al3Ni2 and SiC played a major role in stress release of the matrix.