Assessing the influence of key parameters governing the formation of hydrates and determining the capacity of the latter to store gaseous molecules is needed to improve our understanding of the role of natural gas hydrates in the oceanic methane cycle. Such knowledge will also support the development of new industrial processes and technologies such as those related to thermal energy storage. In this study, high-pressure laboratory methane hydrate formation and dissociation experiments were carried out in a sandy matrix at a temperature around 276.65 K. Methane was continuously injected at constant flowrate to allow hydrate formation over the course of the injection step. The influence of water saturation, methane injection flowrate and particle size on hydrate formation kinetics and methane storage capacity were investigated. Six water saturations (10.8%, 21.6%, 33%, 43.9%, 55% and 66.3%), three gas flowrates (29, 58 and 78 mLn·min−1) and three classes of particle size (80–140, 315–450 and 80–450 µm) were tested, and the resulting data were tabulated. Overall, the measured induction time obtained at 53–57% water saturation has an average value of 58 ± 14 min minutes with clear discrepancies that express the stochastic nature of hydrate nucleation, and/or results from the heterogeneity in the porosity and permeability fields of the sandy core due to heterogeneous particles. Besides, the results emphasize a clear link between the gas injection flowrate and the induction time whatever the particle size and water saturation. An increase in the gas flowrate from 29 to 78 mLn·min−1 is accompanied by a decrease in the induction time up to ~100 min (i.e., ~77% decrease). However, such clear behaviour is less conspicuous when varying either the particle size or the water saturation. Likewise, the volume of hydrate-bound methane increases with increasing water saturation. This study showed that water is not totally converted into hydrates and most of the calculated conversion ratios are around 74–84%, with the lowest value of 49.5% conversion at 54% of water saturation and the highest values of 97.8% for the lowest water saturation (10.8%). Comparison with similar experiments in the literature is also carried out herein.
The knowledge of the phase behavior of carbon dioxide (CO2)-rich mixtures is a key factor to understand the chemistry and migration of natural volcanic CO2 seeps in the marine environment, as well as to develop engineering processes for CO2 sequestration coupled to methane (CH4) production from gas hydrate deposits. In both cases, it is important to gain insights into the interactions of the CO2-rich phase—liquid or gas—with the aqueous medium (H2O) in the pore space below the seafloor or in the ocean. Thus, the CH4-CO2 binary and CH4-CO2-H2O ternary mixtures were investigated at relevant pressure and temperature conditions. The solubility of CH4 in liquid CO2 (vapor-liquid equilibrium) was determined in laboratory experiments and then modelled with the Soave–Redlich–Kwong equation of state (EoS) consisting of an optimized binary interaction parameter kij(CH4-CO2) = 1.32 × 10−3 × T − 0.251 describing the non-ideality of the mixture. The hydrate-liquid-liquid equilibrium (HLLE) was measured in addition to the composition of the CO2-rich fluid phase in the presence of H2O. In contrast to the behavior in the presence of vapor, gas hydrates become more stable when increasing the CH4 content, and the relative proportion of CH4 to CO2 decreases in the CO2-rich phase after gas hydrate formation.
29 December 2016 in Geochemistry, Geophysics, Geosystems
The Niger Delta is one of the largest hydrocarbon basin offshore Africa and it is well known for the presence of active pockmarks on the seabed. During the Guineco‐MeBo cruise in 2011, long cores were taken from a pockmark cluster in order to investigate the state of its current activity. Gas hydrates, oil, and pore‐water were sampled for geochemical studies. The resulting dataset combined with seismic data reveal that shallow hydrocarbon migration in the upper sedimentary section was focused exclusively within the pockmarks. There is a clear tendency for gas migration within the hydrate‐bearing pockmarks, and oil migration within the carbonate‐rich one. This trend is interpreted as a consequence of hydrate dissolution followed by carbonate precipitation in the course of the evolution of these pockmarks. We also demonstrate that Anaerobic Oxidation of Methane (AOM) is the main process responsible for the depletion of pore‐water sulfate, with depths of the Sulfate‐Methane Transition Zone (SMTZ) ranging between 1.8 and 33.4 m. In addition, a numerical transport‐reaction model was used to estimate the age of hydrate‐layer formation from the present‐day sulfate profiles. The results show that the sampled hydrate‐layers were formed between 21 and 3750 years before present. Overall, this work shows the importance of fluid flow on the dynamics of pockmarks, and the investigated cluster offers new opportunities for future cross‐site comparison studies. Our results imply that sudden discharges of gas can create hydrate layers within the upper sedimentary column which can affect the seafloor morphology over few decades.
3 June 2015 in Geochemistry, Geophysics, Geosystems
The evolution of submarine pockmarks is often related to the ascent of fluid from the subsurface. For pockmarks located within the gas hydrate stability zone, methane oversaturation can result in the formation of gas hydrates in the sediment. An ~600 m‐wide sea floor depression in deep waters offshore Nigeria, Pockmark A, was investigated for distributions and quantities of shallow gas hydrates, origins of hydrocarbons, and time elapsed since the last major fluid ascent event. For the first time, pressure coring of shallow sediments and drilling of more than 50 m‐long cores with the sea floor drill rig MARUM‐MeBo70 were conducted in this pockmark. Unusually, high hydrate saturations of up to 51% of pore volume in the uppermost 2.5 m of sediment in the pockmark center substantiate that deepwater pockmarks are a relevant methane reservoir. Molecular and stable C and H isotopic compositions suggest that thermogenic hydrocarbons and secondary microbial methane resulting from petroleum biodegradation are injected into shallower sediments and mixed with primary microbial hydrocarbons. Two independent pore water chloride and sulfate modeling approaches suggest that a major methane migration event occurred during the past one to three centuries. A rough sea floor topography within the pockmark most likely results from combined sediment removal through ascending gas bubbles, hydrate clogging and deflection of migration pathways, gas pressure build‐up, and hydrate sea floor detachment. This study shows for the first time the chronological interrelationship between gas migration events, hydrate formation, and sea floor shaping in a deep sea pockmark.