In order to conduct high-precision measurement of the LIPS-300 ion thruster grid deformation in a vacuum, high-temperature, and plasma environment, a noncontact videometrics system using a telemicroscope was designed. Based on the captured image, the interactive partitioning edge detection method (IPEDM) was used to obtain stable and clear edges of multiple circular cooperative targets. Meanwhile, magnification factor calibration, rotation angle correction, and subpixel-level grid deformation measurement were performed with cooperative targets. The measurement results show that under the power of 750 W in the discharge chamber, the maximum thermal deformation of the screen grid is 1120 μm, and the gap between the screen grid and the accelerator grid is reduced by 420 μm. An accuracy assessment of the system shows that the grid deformation measurement accuracy is better than 12 μm, and the system satisfies the requirement of high-precision real-time measurements of the grid thermal deformation of the ion thruster under the discharge-chamber-running condition and the plasma-beam-extraction condition.
20 July 2022 in International Journal of Mechanics and Materials in Design
Viscoelastic solids, such as composite propellants, exhibit significant time and rate dependencies, and their fracture processes display high levels of nonlinearity. However, the correlation between crack propagation and viscoelastic energy dissipation in these materials remains unclear. Therefore, accurately modeling and understanding of their fracture behavior is crucial for relevant engineering applications. This study proposes a novel viscoelastic phase-field model. In the numerical implementation, the adopted adaptive time-stepping iterative strategy effectively accelerates the coupling iteration efficiency between the phase-field and the displacement field. Moreover, all unknown parameters in the model, including the form of the phase-field degradation function, are identified through fitting against experimental data. Based on an introduced scaling factor, the mechanical response behaviors of solid propellant dogbone specimens under cyclic loading, relaxation, and tension are analyzed, and the predictive capacity of the model is demonstrated by comparing the experimental data with the simulation results. Finally, modeling results for Mode-I and Mode-II crack propagation in single-edge-notched specimens indicate that the reduction of viscous energy dissipation will significantly increase the fracture growth rate, but under the same boundary conditions, the crack path remains unchanged.
In order to ensure the safety of the missile-canister system in silo during the earthquake, a modified transfer matrix method is provided to study the dynamic characteristics of the system. Firstly, a discrete viscoelastic connected double-beam model is developed taking account of the structural nonuniformity and the discrete distribution of the adapters. Secondly, the transfer matrix method of a single beam is modified to solve the problem of discrete connection between the two beams of the double-beam model. Then the natural circular frequencies and mode shapes are calculated by the proposed method, comparing with the finite element method (FEM). Finally, the influence of the stiffness of radial vibration isolators and adapters on the dynamic characteristics of the system is analysed. The comparison shows that the results of the proposed method are well consistent with the FEM calculations and the proposed method is validated. The variations of the first six natural circular frequencies with radial vibration isolator stiffness and adapter stiffness are obtained, which provides a basis for the seismic-relieving design.