Comparative studies of the 2D numerical modelling and simulation of graphene-based gallium arsenide and silicon Schottky junction solar cell are studied using TCAD tools. The performance of photovoltaic cells was examined while taking parameters, such as substrate thickness, relationship between transmittance and work function of graphene, and n-type doing concentration of substrate semiconduction. The area with the highest efficiency for photogenerated carriers was found to be located near the interface region under light illumination. The significant enhancement of power conversion efficiency was shown in the cell with a thicker carrier absorption Si substrate layer, larger graphene work function, and average doping in a silicon substrate. Thus, for improved cell structure, the maximum JSC = 4.7 mA/cm2, VOC = 0.19 V, and fill factor = 59.73% are found under AM1.5G, exhibiting maximum efficiency of 6.5% (1 sun). The EQE of the cell is well above 60%. This work reports the influence of different substrate thickness, work function, and N-type doping on the efficiency and characteristics of graphene-based Schottky solar cells.
24 December 2014 in Journal of Computational Electronics
Performance optimization of Graphene-GaAs schottky barrier solar cell have been performed by considering variables such as substrate thickness, Graphene thickness, dependence between graphene work function and transmittance. The optimized parameter was extensively used to numerically model the design using TCAD Atlas. The results show the enhanced performance of the design with the optimized thickness of Graphene (0.3μm) and GaAs (10μm), resulting in significant increase in power conversion efficiency from 0.732% to 2.581% and reasonable fill factor up to 70%. It was further analysed that maximum potential was developed in the vicinity of the anode, which results in better charge collection hence improving the overall performance of the solar cell. The results are validated with the reported experimental work.