In regions with sanitary landfills, unsuitable liner designs can result in significant soil and groundwater contamination, leading to substantial environmental remediation costs. Addressing this challenge, we propose a semi-analytical model for solute transport that uses the advection–dispersion–reaction equation in a multi-layered liner system. A distinctive feature of our model is its ability to account for infiltration velocity, arbitrary numbers of layers, thin layers such as geomembranes, and mass flow. We validated our model against existing published models and applied it to a case study of a real sanitary landfill in the capital of Brazil. Through parametric analyses, we simulated contaminant transport across various layers, including the geomembrane (GM), geosynthetic clay liner (GCL), soil liner (SL), and compacted clay liner (CCL). The analyses showed the importance of choosing the most appropriate construction system based on the location and availability of materials. Considering toluene contamination, a GM molecular diffusion coefficient (DGM) greater than 10−13 m2 s−1 exhibited similar efficiency when compared with CCL (60 cm thick). In addition, the results showed that the liner system may have the same efficiency in changing SL (60 cm thick) for a GCL (1 cm thick).
1 January 2024 in Engenharia Sanitaria e Ambiental
The Landfill Gas (LFG) generated in municipal solid waste (MSW) landfills consists of the main greenhouse gases such as methane (CH4) and carbon dioxide (CO2). Cover layer systems of sanitary landfills are designed to mitigate the LFG emission into the atmosphere and control water infiltration. Thus, this research aims to quantify and evaluate CH4 and CO2 accurate emissions in the final cover layer system at the Jockey Club Controlled Landfill in Brasília (ACJC) by using the static flux chamber. The emission results were estimated by adjusting the concentration data obtained in 12 tests in the cover layer by the methods of Linear Regression (LR) and the Non-Steady-State Diffusion Flux Estimator (NDFE). Fugitive emissions ranged from 0 to 685.6 g CH4 m-2 day-1 and 0 to 1,563.94 g CO2 m-2 day-1 using the LR method. Using the NDFE method, emissions up to 4.2 and 2.5 times greater than the LR method were estimated for CH4 and CO2, respectively.
1 September 2024 in International Journal of Geomechanics
Several regions in Brazil and the world suffer from the presence of collapsible soils. The development of theories for understanding the phenomenon is significant because the increase of water content is associated with several reasons (e.g., precipitation, rupture of sewage, and water systems). Although some theories explain the behavior of various types of soils, they fail to explain collapsible and structured soils. In this research, an alternative interpretation of the consolidation theory is verified and calibrated for collapsible soil. The alternative model was applied to experimental data from a latosol from southeastern Brazil, and comparisons with the classical theory showed a difference in the saturated hydraulic conductivity of around 100 times. The observation showed promising results compared with the saturated hydraulic conductivity of the field (Guelph Permeameter). Furthermore, consolidation tests verified the collapse potential, the variation of consolidation coefficient and saturated hydraulic conductivity, and the total settlement prevision due to the presence of bleach and washing powder.