This communication presents the design of a compact loop antenna with independent frequency tuning. The proposed antenna consists of a feed line fed by a 50 Ω coaxial probe and four resonating arms on the adjacent sides of the feed line. The two outer resonating arms are directly coupled to the feed line and the other two inner resonating arms are coupled to the outer arms. The proposed antenna has a footprint of 25 mm × 10 mm × 0.2 mm. The designed antenna operates at 0.9 GHz, 2.4 GHz, 3.5 GHz and 5.5 GHz. Each of these bands is individually tuned using varactor diodes. Thus, the aggregation of these tunable bands provides wide bandwidth. The impedance bandwidth and percentage bandwidth of the antenna are 270/1000/400/700 MHz and 33/47.6/11/12.7 % respectively. Furthermore, the gain and efficiency of the antenna are 1.7/1.3/2.1/2 dBi and 60/63/65/69 %. The prototype antenna is fabricated and tested. The measured impedance and radiation characteristics of the antenna are in good correlation with the simulation results.
This letter presents the design of a novel compound reconfigurable antenna array for WiMAX and WLAN application. The proposed array consists of unit cell antenna composed of a truncated circular radiator, C-shaped parasitic elements and perturbed rhombic slot element. A compound reconfigurable unit cell antenna element loaded with PIN diodes is investigated and using the inference made a 1 $\times$ 2 array is designed to increase the gain and efficiency of the dynamic antenna. In the first case, slot antenna alone gets excited with the feed lines of 0 degree and 90 degree phase difference to achieve pattern and polarization reconfiguration for WIMAX applications. In the other case, the patch is excited at WLAN band and with the help of parasitic elements, pattern tilting at 0 degree and μ30 degrees is obtained. The proposed antenna array is fabricated and the simulation results are verified using experimental measurements.
2 November 2022 in Biomass Conversion and Biorefinery
A novel method for achieving linear phase shift is proposed over the frequency range of 2 - 6 GHz. Dielectric characterization of FR4 substrate interfaced with air as well as water produces the phase shift. The substrate property is modified by introducing a plain rectangular packet and W-shaped packet within the FR4 substrate. The overall dimension of the proposed structure is 30 × 60 mm2. Across the entire proposed frequency range, the reflection coefficient is less than −10 dB. The proposed coplanar waveguide with water- and air-stacked FR4 substrate is simulated, fabricated, and measured for its linear phase shifting characteristics analyzed in ISM 2.45, 3.3, and 5.8 GHz bands. The analysis over the entire band depicts that the differential shift in phase is directly proportional to the effective dielectric constant of the material used. The design will be more useful in automotive anti-collision radars in military, cellular base stations, and satellite communications.
Breast cancer killer of women. Mortality can be reduced if disease is early detected. Breast cancer leading the second cancer cause death all over the world. Conventional method of breast cancer detection is various disadvantage it's include high cost, heavy radiation and discomfort to patients. The alternative method to decrease the death rate is microwave imaging technique. The main objective of paper to provide various techniques in microwave imaging and hand held device for breast cancer detection.