In cold regions, the soil temperature gradient and depth of frost penetration can significantly affect roadway performance because of frost heave and thaw settlement of the subgrade soils. The severity of the damage depends on the soil index properties, temperature, and availability of water. While nominal expansion occurs with the phase change from pore water to ice, heaving is derived primarily from a continuous flow of water from the vadose zone to growing ice lenses. The temperature gradient within the soil influences water migration toward the freezing front, where ice nucleates, coalesces into lenses, and grows. This study evaluates the frost heave potential of frost-susceptible soils from Iowa (IA-PC) and North Carolina (NC-BO) under different temperature gradients. One-dimensional frost heave tests were conducted with a free water supply under three different temperature gradients of 0.26°C/cm, 0.52°C/cm, and 0.78°C/cm. Time-dependent measurements of frost penetration, water intake, and frost heave were carried out. Results of the study suggested that frost heave and water intake are functions of the temperature gradient within the soil. A lower temperature gradient of 0.26°C/cm leads to the maximum total heave of 18.28 mm (IA-PC) and 38.27 mm (NC-BO) for extended periods of freezing. The maximum frost penetration rate of 16.47 mm/hour was observed for a higher temperature gradient of 0.78°C/cm and soil with higher thermal diffusivity of 0.684 mm ² /s. The results of this study can be used to validate numerical models and develop engineered solutions that prevent frost damage.

Wildfires and their long-term impacts on the environment have become a major concern in the last few decades, in which climate change and enhanced anthropogenic activities have gradually led to increasingly frequent events of such hazards or disasters. Geological materials appear to become more vulnerable to hazards including erosion, floods, landslides and debris flows. In the present study, the well-known 2017 wildfire and subsequent 2018 debris flows in the Montecito area of California are examined. It is found that the post-wildfire debris flows were initiated from erosion and entrainment processes and triggered by intense rainfall. The significant debris deposition in four major creeks in this area is investigated. Numerical modeling of the post-wildfire debris flows is performed by employing a multi-phase mass flow model to simulate the growth in the debris flows and eventual debris deposition. The debris-flow-affected areas estimated from the numerical simulations fairly represent those observed in the field. Overall, the simulated debris deposits are within 7% error of those estimated based on field observations. A similar simulation of the pre-wildfire scenario indicates that the debris would be much less significant. The present study shows that proper numerical simulations can be a promising tool for estimating post-wildfire erosion and the debris-affected areas for hazard assessment and mitigation.