The present paper deals with tactile sensors with circular electrodes in which conductive ink was used as a transducer converting the pressure into an electric signal. The dependence of the resistance on the thickness of the deposited ink layer and on the electrode design was studied; the results are discussed and displayed graphically. Also the properties of identical tactile sensors in which a conductive elastomer Yokohama rubber CS57-7RSC was used were compared with those with conductive ink.
The article presents the method of investigating the pressure distribution on uneven surfaces, used for the development of a new, modern series of school furniture that meets the relevant health, pedagogical and legal requirements. During the examination of pressure conditions on school chairs with a flexible tactile sensor, which was primarilly developed for this purpose, exact data on the immediate differences in contact pressures between the person sitting and the seat are obtained. Based on this information, it is then possible to optimally shape the seats during their design and subsequent production according to the age of the sitters and the needs of the organizational form of teaching from the point of view of the specific character of the teaching environment. Technical parameters of the flexible tactile sensor depend on the shape and number of electrodes, as well as on the conductive inks used, they are stated and discussed within the article. Due to the large number of collected data, a robot, otherwise used in teaching, was used for obtaining of individual loading characteristics of the proposed sensor. At the end of the article, the results obtained by the statistical processing of the measurements are summarized and discussed.
This chapter presents the ongoing research, which aims to select suitable electrodes for their use in the pressure distribution measurement system Plantograf. In our research, we examine more materials, especially Yokohama conductive rubber CS57-7RSC and also conductive inks, which are represented type DZT-3 K, Graphit 33 and mixture of Loctite-Henkel conductive inks type Loctite 7004Hr and Loctite NCI 7002EC. All materials can be used as a converter between pressure and electrical quantities in the design of planar pressure transduces. We build on our previous works, where were examined the properties of conductive rubber, conductive inks and electrodes. Next part is focused on the newest results of our research. Due to the still incomplete results in the given issue, we decided to perform an extensive and original measurement of a total of 172 combinations of different electrode sizes, the ratio of conductive ink mixtures and the thickness of the applied ink layer. Thanks to this, it will be possible in the future to select a suitable combination of electrodes and inks when designing tactile pressure sensors for industrial or medical applications without the need to perform time-consuming preparatory measurements and exclude unsuitable ink-electrode combinations.
1 August 2018 in Journal of Physics: Conference Series
Pattern recognition deals with obtaining and processing certain data on objects in the real world aimed at characterizing their common properties and classifying them with respect to these properties into classes. This paper deals with a method of pattern recognition with respect to the basic position of images. Factor analysis is used for classification. Factor analysis is a special statistical method using the same features and pattern classes as in discriminant analysis. The m dimensional vector is an input parameter. The method can classify into n groups of patterns. Pattern recognition can work in real time.
SITSCAN CS is an original tactile system, which was primarily developed to investigate pressure distribution on uneven surfaces, e.g., chairs; however, due to its flexibility and modular conception, it can be utilized in other industrial or medical applications too. It consists of a flexible, PET-based PCB print-made sensing plate with active area of 50 × 50 cm with a placed matrix of 50 × 50 individual sensors. It uses the piezoresistive effect of the conductive ink layer as the transducing technology between the applied pressure and the output electrical signal. The tactile system further consists of control electronic circuits which process the measured data with up to 1000 fps with a maximal possible resolution 80 × 80 sensing points. The acquired data can be visualized, stored and further processed by means of the respective PC control program. The article describes the theoretical basis for the tactile system, as well as its development, construction, technical specifications and the testing process.