Purpose: The emergence of Neisseria gonorrhoeae strains that are resistant to the most commonly used antibiotics represents a great concern for global public health. This challenges the effectiveness of clinical treatment regimens and demands the development of alternative antigonococcal agent. In this regard, chitosan nanoparticles (CNPs) are known to have antimicrobial activity against a wide range of pathogens. Thus, they have become a potential candidate for combatting this era of multi-drug resistance. This study aims to formulate CNPs, characterize their physicochemical properties, and examine their antimicrobial activity against gonococcus. Materials and Methods: The ionic gelation method was used to prepare CNPs of different concentrations. Characterization for their particle size (PZ), polydispersity index (PDI), and zeta potential (ZP) was performed. The anti-microbial activity of CNPs was investigated against 13 WHO N. gonorrhoeae reference strains, using the broth dilution method. Cytotoxicity of CNPs and their effect on bacterial adhesion to HeLa cells were investigated. Results: The average PZ and ZP of the prepared NPs were increased when the concentration of chitosan was increased from 1 to 5 mg/mL and found to be in the range of 193 nm ± 1.9 to 530 nm ± 13.3, and 14 mV ± 0.5 to 20 mV ± 1, respectively. Transmission electron microscopes (TEM) images revealed spherical NPs, and the NPs had a low PDI value of ≤ 0.27. The formed CNPs produced antibacterial activity against all tested strains, including those resistant to multiple antibiotics, with a minimum inhibitory concentration (MIC₉₀) of 0.16 to 0.31 mg/mL and a minimum bactericidal concentration (MBC) of 0.31 to 0.61 mg/mL. Of note, at all MIC₉₀ and MBC, the CNPs had no significant cytotoxic effect on HeLa cells and reduced bacterial adhesion to these cells at MBC doses. Conclusion: The present work findings suggest the potential of the CNPs for the treatment of gonorrhoea.

Shampooing is the most common form of hair treatment. Shampoos are primarily products aimed at cleansing the hair and scalp. There are many brands of shampoos in Saudi Arabia, available from different sources, locally and imported from other countries. This study aims to investigate whether such brands comply with the Saudi standard specifications for shampoos, issued by the National Center for Specifications and Standards, and to what extent these specifications are applied. Six shampoo brands were randomly collected from Riyadh market (Pantene®, Sunsilk®, Herbal essences®, Garnier Ultra Doux®, Syoss® and L'Oreal Elvive®). The selected shampoos were evaluated according to their physicochemical properties, including organoleptic characterization, pH measurement, percentage of solid content, rheological measurements, dirt dispersion level, foaming ability and foam stability, and surface tension. All shampoos had a good percentage of solids, excellent foam formation with stable foam and a highly viscous nature. Regarding the pH measurement, all shampoo samples were within the specified range with good wetting ability.

Emerging antibiotic resistance necessitates the development of new therapeutic approaches. Many studies have reported the antimicrobial activity of diclofenac sodium (DIC) and chitosan nanoparticles (CNPs). Hence, this study aimed to prepare non-antibiotic DIC-loaded CNPs (DIC.CNPs) and characterize their in vitro antibacterial activity. DIC.CNPs were prepared from low and high molecular weight (LMW and HMW, respectively) chitosan using an ionic gelation method. Prepared NPs were characterized, and their antibacterial activity against gram-positive Staphylococcus aureus and Bacillus subtilis was evaluated using the agar diffusion and broth dilution methods. The particle size, polydispersity index (PDI), and encapsulation efficiency of the formulated DIC.CNPs increased with increasing MW of chitosan. The prepared NPs showed a narrow size distribution with low PDI values (0.18 and 0.24) and encapsulation efficiency (29.3% and 31.1%) for LMW.DIC.CNPs and HMW.DIC.CNPs, respectively. The in vitro release profile of DIC from the DIC.CNPs was biphasic with a burst release followed by slow release and was influenced by the MW of chitosan. DIC.CNPs exhibited significantly higher antibacterial activity against S. aureus (minimum inhibitory concentration [MIC90] LMW.DIC.CNPs = 35 µg/mL and MIC90 HMW.DIC.CNPs = 18 µg/mL) and B. subtilis (MIC90 LMW.DIC.CNPs = 17.5 µg/mL and MIC90 HMW.DIC.CNPs = 9 µg/mL) than DIC alone did (MIC90 DIC = 250 and 50 µg/mL against S. aureus and B. subtilis, respectively). The antibacterial activity was influenced by pH and the MW of chitosan. Collectively, these results may suggest the potential usefulness of DIC.CNPs as non-antibiotic antibacterial agent necessitating further future studies to asses the stability of DIC.CNPs prepared.

Purpose: Ciprofloxacin (CIP) has poor lung targeting after oral inhalation. This study developed optimized inhalable nanostructured lipid carriers (NLCs) for CIP to enhance deposition and accumulation in deeper parts of the lungs for treatment of noncystic fibrosis bronchiectasis (NCFB). Methods: NLC formulations based on stearic acid and oleic acid were successfully prepared by hot homogenization and in vitro-characterized. CIP-NLCs were formulated into nanocomposite micro particles (NCMPs) for administration in dry powder inhalation (DPI) formulations by spray-drying (SD) using different ratios of chitosan (CH) as a carrier. DPI formulations were evaluated for drug content and in vitro deposition, and their mass median aerodynamic diameter (MMAD), fine particle fraction (FPF), fine particle dose (FPD), and emitted dose (ED) were determined. Results: The CIP-NLCs were in the nanometric size range (102.3 ± 4.6 nm), had a low polydispersity index (0.267 ± 0.12), and efficient CIP encapsulation (98.75% ± 0.048%), in addition to a spherical and smooth shape with superior antibacterial activity. The in vitro drug release profile of CIP from CIP-NLCs showed 80% release in 10 h. SD of CIP-NLCs with different ratios of CH generated NCMPs with good yield (> 65%). The NCMPs had a corrugated surface, but with increasing lipid:CH ratios, more spherical, smooth, and homogenous NCMPs were obtained. In addition, there was a significant change in the FPF with increasing lipid:CH ratios (P ˂ 0.05). NCMP-1 (lipid:CH = 1:0.5) had the highest FPD (45.0 μg) and FPF (49.2%), while NCMP-3 (lipid:CH = 1:1.5) had the lowest FPF (37.4%). All NCMP powders had an MMAD in the optimum size range of 3.9– 5.1 μm. Conclusion: Novel inhalable CIP NCMP powders are a potential new approach to improved target ability and delivery of CIP for NCFB treatment.

The needs for safe, therapeutically effective antidiarrheal combination continuously lead to effective treatment. When administered simultaneously, metronidazole-kaolin interactions have been reported by FDA but not studied. This paper is the first to study metronidazole-kaolin interactions. Adsorption isotherms of a metronidazole-kaolin antidiarrheal combination from aqueous solutions at an in vivo simulated pH conditions were obtained at 37 ± 0.5 °C. Langmuir constants for the adsorption are 10.8225, 41.3223 mg g(-1) and 11.60, 2.56 l g(-1) aimed at the monolayer capacity, and the equilibrium constant at pH 1.2 and 6.8, respectively. pH effect on adsorption of known concentration of metronidazole by kaolin was also studied over the range 1.2-8. A gradual increase in the adsorbed amount was noted with increasing the pH. Elution studies by different eluents showed that drug recovery from adsorbent surface was pH-dependent via competitive mechanism. The elution followed the sequence: 0.1 M HCl > 0.1 M NaCl > H2O. Adsorption-desorption studies revealed physical adsorption. The equilibrium concentration of metronidazole decreased as the adsorbent concentration was increased in the systems. The dissolution profiles (USP) of commercially available tablets (Riazole® 500 mg) were obtained alone and in the presence of either (ORS®) rehydration salts and 9 or 18 g of kaolin powder. The percentage drug released versus time: 95.01% in 25 min, 101.02% in 30 min, 67.63% in 60 min, 60.59% in 60 min, respectively. The percentage drug released versus time was increased with ORS® due to common ion effect [Cl(-)], while, it was decreased with kaolin due to adsorption. The mechanism of reaction of Riazole® (500 mg) tablets in the different dissolution media, confirms with Korsmeyer-Peppas model. The interaction between metronidazole and kaolin was characterized by melting point determinations, differential scanning calorimetry analysis and infrared spectroscopy. The results obtained were suggestive of physical interaction between metronidazole and kaolin.