Small blue ZrS 2 colloidal quantum dots (QDs) have been synthesized by a facile, in situ precursor-releasing strategy. The ZrS 2 QDs show intense blue emission and high performance as the active layer in solar-blind UV photodetector devices.
7 December 2021 in Journal of Materials Chemistry C
Self-powered, high detectivity, solution-processed near-infrared (NIR) quantum dot photodetectors based on novel alloyed AgAuSe quantum dots (QDs) are fabricated for the first time and their photoelectric properties are explored. AgAuSe QDs were capped with 1,2-ethanedithiol by ligand exchange to improve the carrier transfer of the film. Their thin films were successfully deposited on the substrate of the interdigital Au electrodes with Schottky contacts. There is an inevitable subtle distinction between the contact with the two ends of the electrodes, leading to the self-powered performance of the devices. The devices exhibit a high specific detectivity of 1.55 × 1010 Jones (>109 Jones) under weak illumination at zero bias voltage and room temperature. They are promising in a wide range of applications, such as in low cost and large area smart sensors, the Internet of Things (IoT), imaging devices, wearable devices and many other emerging fields.
Silver-based chalcogenide semiconductors exhibit low toxicity and near-infrared optical properties and are therefore extensively employed in the field of solar cells, photodetectors, and biological probes. Here, we report a facile mixture precursor hot-injection colloidal route to prepare Ag2TexS1−x ternary quantum dots (QDs) with tunable photoluminescence (PL) emissions from 950 nm to 1600 nm via alloying band gap engineering. As a proof-of-concept application, the Ag2TexS1−x QDs-based near-infrared photodetector (PD) was fabricated via solution-processes to explore their photoelectric properties. The ICP-OES results reveal the relationship between the compositions of the precursor and the samples, which is consistent with Vegard’s equation. Alloying broadened the absorption spectrum and narrowed the band gap of the Ag2S QDs. The UPS results demonstrate the energy band alignment of the Ag2Te0.53S0.47 QDs. The solution-processed Ag2TexS1−x QD-based PD exhibited a photoresponse to 1350 nm illumination. With an applied voltage of 0.5 V, the specific detectivity is 0.91 × 1010 Jones and the responsivity is 0.48 mA/W. The PD maintained a stable response under multiple optical switching cycles, with a rise time of 2.11 s and a fall time of 1.04 s, which indicate excellent optoelectronic performance.
1 April 2021 in Chinese Journal of Chemical Physics
The issues of low crystallinity and slow crystallization rate of poly(lactic acid) (PLA) have been widely addressed. In this work, we find that doping PLA with Zn(II) ions can speed up the process of crystallization of PLA. Three kinds of Zn(II) salts (ZnCl2, ZnSt and ZnOAc) were tested in comparison with some other ions such as Mg(II) and Ca(II). The increased crystallinity and crystallization rate of PLA doping with Zn(II) are reflected in FT-IR and variable temperature Raman spectroscopy. The crystallinity is further confirmed or measured with differential scanning calorimetry and X-ray diffraction. The crystallinity rate of the PLA/ZnSt-0.4 wt% material can reach 22.46% and the crystallinity rate of the PLA/ZnOAc-0.4 wt% material can reach 24.83%, as measured with differential scanning calorimetry.