Vehicle slip angle (VSA) estimation is of paramount importance for connected automated vehicle dynamic control, especially in critical lateral driving scenarios. In this paper, a novel kinematic-model-based VSA estimation method is proposed by fusing information from a global navigation satellite system (GNSS) and an inertial measurement unit (IMU). First, to reject the gravity components induced by the vehicle roll and pitch, a vehicle attitude angle observer based on the square-root cubature Kalman filter (SCKF) is designed to estimate the roll and pitch. A novel feedback mechanism based on the vehicle intrinsic information (the steering angle and wheel speed) for the pitch and roll is designed. Then, the integration of the reverse smoothing and grey prediction is adopted to compensate for the cumulative velocity errors during the relatively low sampling interval of the GNSS. Moreover, the GNSS signal delay has been addressed by an estimation-prediction integrated framework. Finally, the results confirm that the proposed method can estimate the VSA under both the slalom and double lane change (DLC) scenarios.

The sideslip angle and attitude are crucial for automated driving especially for chassis integrated control and environmental perception. In this article an inertial measurement unit (IMU)-based automated vehicle body sideslip angle and attitude estimation method aided by low-sample-rate global navigation satellite system (GNSS) velocity and position measurements using parallel adaptive Kalman filters is proposed. This method can estimate the sideslip angle and attitude simultaneously and is robust against the vehicle parameters and road friction even as the vehicle enters critical maneuvers. First, based on the acceleration and angular rate from the six-dimensional inertial measurement unit, the attitude, velocity and position (AVP) are integrated with the navigation coordinates and the AVP error dynamics and observation equations of the integration results are developed. Second, parallel innovation adaptive estimation (IAE)-based Kalman filters is designed to estimate the AVP error of the integration method to address the issues of the GNSS low sampled rate and abnormal measurements. Then the AVP error is forwarded to the AVP integration to compensate the accumulated error. To improve the heading angle estimation accuracy, the heading error is estimated by a decoupled IAE-based Kalman filter aided by GNSS heading. In addition, time synchronization of the IMU and GNSS is realized through hardware based on the pulse per second signal of the GNSS receiver and the spatial synchronization is achieved by a direct compensation method. Lastly, the sideslip angle and attitude estimation method is validated by a comprehensive experimental test including critical double lane change and slalom maneuvers. The results show that the estimation error of the longitudinal velocity and lateral velocity is smaller than 0.1 m/s (1σ), and the estimation error of the sideslip angle is smaller than 0.15° (1σ).

Vehicle localization is essential for intelligent and autonomous vehicles. To improve the accuracy of vehicle stand-alone localization in highly dynamic driving conditions during GNSS (Global Navigation Satellites Systems) outages, this paper proposes a vehicle localization system based on vehicle chassis sensors considering vehicle lateral velocity. Firstly, a GNSS/On-board sensors fusion localization framework is established, which could estimate vehicle states such as attitude, velocity, and position. Secondly, when the vehicle has a large lateral motion, nonholonomic constraint in the lateral direction loses fidelity. Instead of using nonholonomic constraint, we propose a vehicle dynamics/kinematics fusion lateral velocity estimation algorithm, which combines the advantage of vehicle dynamic model in low dynamic driving conditions and the advantage of kinematic model in highly dynamic driving conditions. Thirdly, vehicle longitudinal velocity estimated by WSS (Wheel Speed Sensor) and lateral velocity estimated by proposed method are as measurements for the localization system. All information is fused by an adaptive Kalman filter. Finally, vehicle experiments in U-turn maneuver and left-turn maneuver at a traffic intersection are conducted to verify the proposed method. Four different methods are compared in the experiments, and the results show that the estimated position accuracy of our method is below half a meter during a 5s GNSS outage and could keep a sub-meter-level during a 20s GNSS outage while the vehicle has a relatively large lateral motion.

According to the existing mainstream automatic parking system (APS), a parking path is first planned based on the parking slot detected by the sensors. Subsequently, the path tracking module guides the vehicle to track the planned parking path. However, since the vehicle is non-linear dynamic, path tracking error inevitably occurs, leading to inclination and deviation of the parking. Accordingly, in this paper, a reinforcement learning-based end-to-end parking algorithm is proposed to achieve automatic parking. The vehicle can continuously learn and accumulate experience from numerous parking attempts and then learn the command of the optimal steering wheel angle at different parking slots. Based on this end-to-end parking, errors caused by path tracking can be avoided. Moreover, to ensure that the parking slot can be obtained continuously in the process of learning, a parking slot tracking algorithm is proposed based on the combination of vision and vehicle chassis information. Furthermore, given that the learning network output is hard to converge, and it is easy to fall into local optimum during the parking process, several reinforcement learning training methods in terms of parking conditions are developed. Lastly, by the real vehicle test, it is proved that using the proposed method can achieve a better parking attitude than using the path planning and path tracking-based method.

The slip angle and attitude are vital for automated driving. In this paper, a systematic inertial measurement unit (IMU)-based vehicle slip angle and attitude estimation method aided by vehicle dynamics is proposed. This method can estimate the slip angle and attitude simultaneously and autonomously. With accurate attitude, the slip angle can be estimated precisely even though the vehicle dynamic model (VDM)-based velocity estimator diverges for a short time. First, the longitudinal velocity, pitch angle, lateral velocity, and roll angle were estimated by two estimators based on VDM considering the lever arm between the IMU and rotation center. When this information was in high fidelity, it was applied to aid the IMU-based slip angle and attitude estimators to eliminate the accumulated error correctly. Since there is a time delay in detecting the abnormal estimation results from VDM-based estimators during critical steering, a novel delay estimation and prediction structure was proposed to avoid the outlier feedback from vehicle dynamics estimators for the IMU-based slip angle and attitude estimators. Finally, the proposed estimation method was validated under large lateral excitation experimental tests including double lane change (DLC) and slalom maneuvers.