The three-dimensional network and ample pore structure of novel hydrogel materials enable outstanding adsorption performance for pollutants such as methylene blue (MB) and Cr6+ ions in wastewater. In order to develop an environmentally friendly hydrogel with high adsorption performance and low cost, a type of carboxymethyl cellulose (CMC) composite hydrogel was synthesised with montmorillonite (MMT) via chain radical polymerization, which gives it great potential for application in the field of wastewater purification. A series of hydrogel samples were characterised through SEM, FTIR and nitrogen porosimetry analysis, indicating the successful intercalation of MMT nanosheets into the hydrogel crosslinking network. The mass ratio of CMC to MMT, the amounts of adsorbent, the initial concentration of wastes, pH, and the adsorption temperature were investigated and optimised for hydrogel adsorption performance. When the initial concentration of MB is 60 mg/L, pH is 7, the dosage of MB is 0.5 g/L, and the adsorption temperature is 30 °C, the hydrogel sample the highest adsorption capability for MB removal, with an adsorption amount of 112.9 mg/g. When the initial concentration of Cr6+ is 10 mg/L with a pH of 7, the highest adsorption capacity of the hydrogel for Cr6+ removal is 1.35 mg/g. The fitting results of the isothermal models, the kinetic models, internal particle diffusion models and the thermodynamics of the experimental data of the adsorbate adsorption process show that the adsorption of MB by hydrogel is a spontaneous segmented process of multi-layer physical and chemical adsorption. Additionally, the adsorption of Cr6+ ions by hydrogel is a spontaneous segmented process of multi-layer physical adsorption.
Given the advantages of readily availability, low cost, convenient operation, and large adsorption capacity, brown seaweed has been studied extensively as a biosorbent for heavy metal remediation from aqueous media. Herein, raw Lessonia nigrescens and brown seaweed residue, a waste product from the manufacturing of alginate from L. nigrescens, were employed as low-cost and renewable adsorption materials for effective copper removal in wastewater streams. The influences of temperature, sample loadings, adsorption time, initial metal ion concentrations, and pH on the efficiency of the metal ions adsorption process were investigated. The thermodynamics and kinetics of Cu (II) adsorption for both the raw seaweed and seaweed residue were studied in order to determine the maximum removal efficiency and capacity. The characterization of the seaweed and seaweed residue before and after copper adsorption with SEM, FTIR, EDS, etc., coupled with the thermodynamics study, confirmed the ion exchange mechanism involved in the adsorption process. Under optimal conditions, the removal efficiencies were 75% and 71% for L. nigrescens and seaweed residue, respectively, and the adsorption capacities can reach 12.15 mg/g and 9.09 mg/g within 10 min for L. nigrescens and seaweed residue, respectively. The slight reduction in removal efficiency was because the active ion exchange sites were partially removed during the alginate extraction. The comparable metal ion removal efficiency between raw seaweed and seaweed residue suggesting the L. nigrescens residue is viable as bio-adsorbent and potential for industrial applications in adsorption process. The results provided a novel way to upgrade seaweed biomass in a biorefinery concept.