The paper analyses the indoor environment in two modern intelligent buildings located in Poland. Measurements of air and globe temperatures, relative humidity and carbon dioxide concentration in 117 rooms carried out in the space of 1.5 years were presented. Thermal comfort of the occupants has been investigated using a questionnaire survey. Based on 1369 questionnaires, thermal sensation, acceptability and preference votes were analysed in view of their interdependency as well as their dependency on operative temperature, which proved to be very strong. It has been found that the respondents did not completely rate thermal comfort and indoor environment quality as very high, although the overwhelming sensations were positive. Apart from the operation of heating, ventilation and air conditioning (HVAC) systems, this might have also been the cause of individual human factors, such as body mass index, as tested in the study, or the finding that people were generally in favour of a warmer environment. Moreover, thermal environment proved to be the most important element for ensuring the well-being of the occupants.

Sintered duplex stainless steels (SDSSs) appear to be very interesting and promising materials that can be used in many industrial sectors. Ferrite improves material strength while austenite increases hardness and corrosion resistance. This study proposes a method to improve functional properties (e.g. hardness and wear resistance) by means of alloying the surface of the sintered duplex steel with Cr₃C₂+ 10% NiAl powder. The results of optical microscope metallography, SEM/EDX, XRD analysis and microhardness and wear resistance measurements are also presented. The surface alloying with Cr₃C₂is a manufacturing method of surface layer hardening in sintered stainless steels and modification of surface layer properties such as hardness and coefficient of friction.

People tend to spend considerable amounts of time in buildings; thus the issue of providing proper indoor environmental quality is of significant importance. This paper experimentally analyses the subjective sensations of the occupants of intelligent and traditional buildings with the focus on possible differences between these two types of buildings. The study is based on a large database of 1302 questionnaires collected in 92 rooms where simultaneous measurements of the indoor environment physical parameters (air and globe temperature, relative humidity, carbon dioxide concentration, and illuminance) were carried out. Their impact on the subjective assessment of the indoor environment has been presented and analysed. The results show that the occupants seemed to be more favourable towards the indoor conditions in the intelligent building; however, the differences in comparison to the traditional buildings were not considerable. Similarly, self-reported productivity proved to be higher in the intelligent building, while the optimal range of air temperature, which ensured highest productivity, was 22–25 °C. Moreover, a strong correlation between the occupants’ overall comfort and their perception of the air quality has been found.

A characteristic feature of sintered stainless steel (SSS) is its porosity. Porosity results in a lower density of steel, making attractive components for producing lightweight structures and materials used in industry (e.g., the automotive industry or aerospace). Scientists also observe that porosity adversely affects steel’s properties, especially its strength properties. One of the proposals for improving the discussed properties is the use of surface treatment of sintered stainless steels, e.g., with the use of concentrated energy sources such as plasma beams or laser beams. However, this proposal is an incidental subject of research, which is not justified from the point of view of the obtained research results presented by a few research groups. In this study, the surface modification (surface treatment) of sintered stainless steel was presented. The authors proposed the use of two surface treatments in order to compare them and obtain the best results. The first treatment was the deposit of Cr₃C₂–NiCr coatings on SSS surfaces using the atmospheric plasma spraying (APS) method. The second treatment was to create surface layers on SSSs by laser alloying the surface with a CO₂ laser. Due to high precision and ease of automation, the most common methods in surface alloying treatment are laser technologies. This research’s main aim was to analyze the microstructure and strength properties of the SSS surface layer. The research confirms that applying the Cr₃C₂–NiCr coating and modifying the surface layer through the laser alloying method improves the mechanical properties of SSSs.