Rolling element bearings (REBs) are an essential part of rotating machinery. A localised defect in a REB typically results in periodic impulses in vibration signals at bearing characteristic frequencies (BCFs), and these are widely used for bearing fault detection and diagnosis. One of the most powerful methods for BCF detection in noisy signals is envelope analysis. However, the selection of an effective band-pass filtering region presents significant challenges in moving towards automated bearing fault diagnosis due to the variable nature of the resonant frequencies present in bearing systems and rotating machinery. Cepstrum Pre-Whitening (CPW) is a technique that can effectively eliminate discrete frequency components in the signal whilst detecting the impulsive features related to the bearing defect(s). Nevertheless, CPW is ineffective for detecting incipient bearing defects with weak signatures. In this study, a novel hybrid method based on an improved CPW (ICPW) and high-pass filtering (ICPW-HPF) is developed that shows improved detection of BCFs under a wide range of conditions when compared with existing BCF detection methods, such as Fast Kurtogram (FK). Combined with machine learning techniques, this novel hybrid method provides the capability for automated bearing defect detection and diagnosis without the need for manual selection of the resonant frequencies. The results from this novel hybrid method are compared with a number of established BCF detection methods, including Fast Kurtogram (FK), on vibration signals collected from the project I2BS (An EU Clean Sky 2 project ‘Integrated Intelligent Bearing Systems’ collaboration between Schaeffler Technologies and the University of Southampton. Safran Aero Engines was the topic manager for this project) and those from three databases available in the public domain—Case Western Reserve University (CWRU), Intelligent Maintenance Systems (IMS) datasets, and Safran jet engine data—all of which have been widely used in studies of this kind. By calculating the Signal-to-Noise Ratio (SNR) of each case, the new method is shown to be effective for a much lower SNR (with an average of 30.21) compared with that achieved using the FK method (average of 14.4) and thus is much more effective in detecting incipient bearing faults. The results also show that it is effective in detecting a combination of several bearing faults that occur simultaneously under a wide range of bearing configurations and test conditions and without the requirement of further human intervention such as extra screening or manual selection of filters.
Rolling element bearings (REBs) are critical components in rotating machinery and a leading cause of machine failures. Traditional fault detection methods rely on signal processing, but advances in machine learning (ML) and deep learning (DL) have dramatically improved diagnostic accuracy. However, existing DL models struggle with data availability, generalization, and domain adaptation, making industrial applications challenging. This study proposes a convolutional neural network (CNN) model trained on numerically simulated vibration data generated for a wide range of bearing designs. A novel hybrid signal processing method is employed to enhance feature extraction and reduce domain shifts between simulated and real-world data. The optimized CNN model, trained on simulated data, is tested using experimental and real-world vibration signals from laboratory bearings and jet engine components. The results show high classification accuracy using data from the Case Western Reserve University experimental dataset and successful fault detection in real-world Safran jet engine ground tests. The findings demonstrate the effectiveness of the developed CNN-based model for bearing fault classification, tackling training data scarcity and generalizability challenges while contributing to the development of intelligent fault diagnosis models for several industrial applications.
This paper introduces a two-stage intelligent fault diagnosis model for rolling element bearings (REBs) aimed at overcoming the challenge of limited real-world vibration training data. In this study, bearing characteristic frequencies (BCFs) extracted from a novel hybrid method combining cepstrum pre-whitening (CPW) and high-pass filtering developed by the authors’ group are used as input features, and a two-stage approach is taken to develop an intelligent REB fault detect and diagnosis model. In the first stage, various machine learning (ML) methods, including support vector machine (SVM), multinomial logistic regressions (MLR), and artificial neural networks (ANN), are evaluated to identify faulty bearings from healthy ones. The best-performing ML model is selected for this stage. In the second stage, a similar evaluation is conducted to find the most suitable ML technique for bearing fault classification. The model is trained and validated using vibration data from an EU Clean Sky2 I2BS project (An EU Clean Sky 2 project ‘Integrated Intelligent Bearing Systems’ collaborated between Schaeffler Technologies and the University of Southampton. Safran Aero Engines was the topic manager for this project) and tested on datasets from Case Western Reserve University (CWRU) and the US Society for Machinery Failure Prevention Technology (MFPT). The results show that the two-stage model, using an SVM with a polynomial kernel function in Stage-1 and an ANN with one hidden layer and 0.05 dropout rate in Stage-2, can successfully detect bearing conditions in both test datasets and perform better than the results in literature without the requirement of further training. Compared with a single-stage model, the two-stage model also shows improved performance.
9 February 2021 in Journal of Vibration and Control
The objective of this research is to diagnose an inaccessible rolling bearing by indirect vibration measurement. In this study, a shaft supported with several bearings is considered. It is assumed that the vibration for at least one bearing is not recordable. The purpose is to diagnose inaccessible bearing by the recorded data from the sensors located on the other bearings. To achieve this goal, the continuous wavelet transform is used to detect weak signatures in the available vibration signals. A new criterion for adjusting the scale parameter of continuous wavelet transform is proposed based on the amplitude of the bearing characteristic frequencies. In this criterion, the optimal scale is selected to maximize the amplitude of bearing characteristic frequencies in comparison with the amplitude of the other frequencies. The results of the proposed method are compared with a popular method, energy-to-entropy ratio criterion, using two different sets of run-to-failure experimental data. Results indicate that the proposed method in this article is more effective and efficient for extracting the weak signatures and diagnosing inaccessible bearings from the recorded vibration signals.
1 August 2022 in Insight - Non-Destructive Testing and Condition Monitoring
Intelligent fault classification of rolling element bearings (REBs) using machine learning (ML) techniques increases the reliability of industrial assets. One of the main issues associated with ML model development is the lack of training data and, most importantly, the ability of models to be used for applications without specific training data, ie the generalisation capability of models. This study investigates the feasibility of using multinomial logistic regression (MLR) as generalised ML models for rolling element bearing fault classification without the requirement of training data for new bearing designs and varied machine operations. This has been achieved by using bearing characteristic frequencies (BCFs) as inputs to the MLR models extracted by a newly developed hybrid method. The new method combines cepstrum pre-whitening (CPW) and full-band enveloping, which can effectively identify the BCFs in vibration data from various machines. This paper presents the methods of the feature extraction and the development of generalised ML models for REBs based on data from the EU Clean Sky 2 I2BS project1. This model is then validated by data from Case Western Reserve University (CWRU) and the Society for Machinery Failure Prevention Technology (MFPT), available in the public domain without further training.