The invasion or aggregation of marine biota in coastal waters has become a common problem, threatening the safety of cooling water systems in the context of environmental and climate changes. However, studies on issues of coastal nuclear power plants from the view of marine ecology have mostly focused on the thermal effluent, entrainment effect on organisms, residual chlorine, radioactivity, etc. There is a lack of information on the safety of cooling water systems in nuclear power plants blocked by marine biota. Based on field and historical datasets, this study screened phytoplankton species that may potentially block the cooling water system of the Fuqing nuclear power plant on the Southeast China coast, identified the phytoplankton risk and a risk calendar, and established a catalog of risk phytoplankton species for the cooling water system. The screening criteria were simultaneously required as follows: (1) particle size of cells or group >2000 μm; (2) phytoplankton bloom or aggregation events occurred in surrounding areas; (3) and species abundance maintained at >0.5×10⁵ cells/L in the surrounding area. Nine high-risk species were screened out that can easily form colonies, clusters, and groups, including Thalassiosira diporocyclus, Thalassiosira subtilis, Noctiluca scintillans, Phaeocystis globosa, Pseudo-nitzschia pungens, Pseudo-nitzschia delicatissima, Skeletonema costatum, Skeletonema dohrnii, Paralia sulcata. Due to small cells or the formation of short chains, some dominant phytoplankton species, even those with advantages in abundance and occurrence, had difficulty threatening the reliability of cooling water systems in nuclear power plants. The outbreak of different phytoplankton species varied daily, and the risk of blockage was highest from April to July. The biological characteristics, ecological mechanisms underlying outbreaks of high-risk phytoplankton species are reviewed and discussed, suggesting a high degree of temporal and spatial variability of blockage risk. Finally, main prevention and control measures used against high-risk phytoplankton species are provided to imply new ideas and methods for nuclear power plants. These strategies have very important practical and scientific significance.

Biofouling is one of the main factors affecting the efficiency and safety of cooling water systems in coastal nuclear power plants. Understanding the population dynamics, succession rules and cumulative effects of major fouling organisms is the basis for targeted prevention and control. A 1-year simulated concrete panel test was conducted from December 2020 to November 2021 in Xinghua Bay, China. A total of 78 species of fouling organisms were recorded by combining the monthly, seasonal, semiannual, annual and monthly cumulative panels, and the community composition was dominated by nearshore warm-water species, making for a typical subtropical inner bay-type community. The fouling organisms had a peak attachment period from June to October. Significantly more attachment was observed during summer (from June to August) than during the other three seasons. The attachment amount in the second half-year (from June to November) was much higher than that in the first half-year (from December to May). The attachment thickness, density, and biomass of the bottom summer panels reached 20 cm, 105,150 ind./m², and 19,274.50 g/m², respectively, while those of the bottom annual panels were 40 cm, 27,300 ind./m², and 17,762.50 g/m², respectively. The dominant fouling organisms with calcified shells mainly included Amphibalanus reticulatus and Pernaviridis. These species had high attachment amounts,could accumulate attachments for a long time, and even might cause secondary blockage, making them the most detrimental to the safety of a cooling system. Moreover,the seasonal upward growth of hydroids and bryozoans can also significantly reduce the efficiency of cooling water intake. We suggest that targeted prevention and control should be carried out according to the larval attachment period of different dominant groups of fouling organisms during June-October, which can greatly improve the prevention and control efficiency. Strengthening the research on the biological cycle phenomenon of the main species and their main environmental impact factors, and establishing a scientific and effective early-warning model are the governance direction of formulating and implementing scientific pollution prevention and control in the future.

Seawater cooling is the most common way to cool down nuclear power plants. However, the thermal drainage of nuclear power plants results in sharp rises in local seawater temperatures and, therefore, affects fisheries and ecologies. Therefore, evaluating the thermal tolerance of marine organisms not only provides further insight into their biological characteristics but also holds significant importance for the site selection and construction of nuclear power plants. This study investigated the thermal tolerance of spotted sea bass (Lateolabrax maculatus) and pearl gentian grouper (Epinephelus fuscoguttatus female × E. lanceolatus male) using the critical thermal maximum method. The environmental temperatures for spotted sea bass and grouper in spring, summer, autumn, and winter were 21.6/23 °C, 26.5/25.9 °C, 25.0/25.9 °C, and 14.5/16.6 °C, respectively. Under four seasonal conditions, different temperature rise rates of +2 °C, +4 °C, +6 °C, and +8 °C per hour were set. The maximum critical temperature, initial lethal temperature, absolute lethal temperature, and semi-lethal temperature were recorded for both fish species. The results show that the rates of temperature increase did not affect the thermal tolerance of either fish species. In all seasons, the fish experienced rapid death once they reached the initial lethal temperature. However, there was a significant correlation of season with thermal tolerance in both fish species. For spotted sea bass, the semi-lethal temperature in summer reached about 40 °C, while in winter it was about 35 °C. For pearl gentian grouper, the semi-lethal temperature in summer reached about 40 °C, while in winter, it was about 38 °C. These results remind us that these two fish species have a limited ability to adapt to rapid temperature rises, but appropriate acclimation temperatures can effectively improve their thermal tolerance. Therefore, it is necessary to further consider the potential impacts on these fish species during the site selection and construction process of nuclear power plants.

The Cosmonaut Sea is an under-studied area and a “white spot” for macrobenthos research. Here, we report on the species diversity and community structure of macrobenthos collected using tringle trawls on the 38th Chinese National Antarctic Research Expedition (CHINARE) in the Cosmonaut Sea, East Antarctica. A total of 11 tringle trawls were deployed at different depths across the shelf, slope and seamount of the Cosmonaut Sea. A total of 275 macrobenthic species were found from 207 to 1994 m. The species richness per station varied from 23 to 89. Echinoderms (100 species), arthropods (48 species) and mollusks (36 species) were the most dominant groups. Echinoderms and arthropods dominated in abundance at seamount stations, and echinoderms, arthropods and polychaetes dominated in abundance at slope stations, while bryozoans, corals, ascidians and sponges were abundant on the Cosmonaut Sea shelf. Depth was the major driving force influencing the distribution of macrobenthos. The main components were two core communities. One was dominated by sessile suspension feeders and associated fauna. Variants of this community include sponges and bryozoans. The other core community was dominated by mobile deposit feeders, infauna and grazers–epifauna, which included arthropods and echinoderms. The results showed that the slope (40–50° E, 65–67° S) of the Cosmonaut Sea may be an important area with complex ecological processes. The results of this study contribute to the knowledge of species diversity and communities of macrobenthos in the Cosmonaut Sea and provide monitoring data for future ecosystem health assessments and better protection.

Radionuclides and heavy metals pose potential risks to marine ecosystems and human health. Daya Bay, the site of China’s first commercial nuclear power plant, has experienced significant anthropogenic impacts, yet the extent of radionuclide and heavy metal contamination remains unclear. Nineteen surface sediment samples were collected in January 2024 and analyzed for natural (²¹⁰Pb, ²²⁸Th, ²²⁶Ra, ²²⁸Ra, and ⁴⁰K) and anthropogenic (¹³⁷Cs) radionuclides, heavy metals (Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As), grain size, and total organic carbon (TOC). The surface sediments of Daya Bay were predominantly fine-grained, with TOC levels ranging from 0.41% to 1.83%, influenced significantly by riverine input from the Dan’ao River. Natural radionuclides exhibited distinct spatial patterns: ²¹⁰Pb and ²²⁸Th activity levels were higher in fine-grained sediments, and correlated with TOC, indicating adsorption and sedimentation controls. In contrast, anthropogenic ¹³⁷Cs activity was low and showed no significant impact from the nuclear power plant. Notably, the absence in the samples of key anthropogenic radionuclides typically associated with nuclear power plant operations further confirmed the negligible impact of the power plant on local sediment contamination. The results indicated that the baseline levels of both natural and anthropogenic radionuclides and heavy metals were predominantly influenced by natural processes and local anthropogenic activities rather than the operation of the nuclear power plant. This study establishes critical baselines for radioactivity and heavy metals in Daya Bay, underscoring effective pollution control measures and the resilience of local ecosystems despite anthropogenic pressures.