During hydraulic fracturing operations of low-permeability reservoirs, packers are the key component to ensure the success of multistage fracturing. Packers enable sections of the wellbore to be sealed off and separately fractured by hydraulic pressure, one at a time, while the remainder of the wellbore is not affected. However, reliable sealing properties of the packer rubber are required to meet the high-pressure and high-temperature (HPHT) conditions of reservoirs (such as 70 MPa and 170 °C). In this study, the structures of the packer rubber with two different materials are optimized numerically by ABAQUS and validated by experiments. The optimization process starts from the packer rubber with a conventional structure, and then, the weakest spots are identified by ABAQUS and improved by slightly varying its structure. This process is iterative, and the final optimized structure of a single rubber barrel with expanding back-up rings is achieved. For the structure of three rubber barrels with metallic protective covers, both HNBR and AFLAS fail under HPHT conditions. For the final optimized structure, the packer rubber made of AFLAS can work better under HPHT than that made of HNBR which ruptures after setting. The results show that the optimized structure of a single rubber barrel with expanding back-up rings and the material AFLAS are a good combination for the packer rubber playing an excellent sealing performance in multistage fracturing in horizontal wells.
1 January 2022 in Journal of Petroleum Science and Engineering
Casing corrosion during CO2 injection or storage results in significant economic loss and increased production risks. Therefore, in this paper, a corroded casing risk assessment model based on analytic hierarchy process and fuzzy comprehensive evaluation is established to identify potential risks in time. First, the corrosion rate and residual strength characteristics are analyzed through corrosion tests and numerical simulations, respectively, to determine the risk factors that may lead to an accident. Then, an index system for corroded casing risk evaluation is established based on six important factors: temperature, CO2 partial pressure, flow velocity, corrosion radius, corrosion depth and wellhead pressure. Subsequently, the index weights are calculated via the analytic hierarchy process. Finally, the risk level of corroded casing is obtained via the fuzzy comprehensive evaluation. The corroded casing risk assessment model has been verified by a case well, which shows that the model is valuable and feasible. It provides an effective decision-making method for the risk evaluation of corroded casing in CO2 injection well, which is conductive to improve the wellbore operation efficiency.