The natural product Desmosdumotin D (hereafter referred to as Des-D), isolated from the plant Desmos dumosus, showed potent anti-HIV activity. However, the subsequent pharmacological activity and clinical studies are limited due to the low content of Des-D in the plant. Therefore, the total synthesis path of Des-D was optimized in this paper, and the total yield was increased from 4.4% to 11.9%. Additionally, twelve analogues were obtained following the synthesis route of Des-D. The anti-HIV activity evaluation results in vitro showed that Des-D had the highest activity, with an IC50 value of 13.6 μM, and compounds 17 and 11 had the lowest anti-HIV activity, with IC50 values of 101.3 μM and 161.0 μM, respectively. Through the molecular docking of compounds Des-D and 17 with HIV-IN, the results show that phenolic hydroxyl groups and two benzene rings interact with HIV-IN and are possible pharmacodynamic groups.
Conventional wiped-film molecular distillers (WFMDs) often show limited hydrodynamic renewal and mixing when processing high-viscosity materials because of liquid pooling and weak secondary flow. This study investigates a novel grooved scraper design for a wiped-film molecular distiller handling an ethylene glycol/glycerol mixture (42.0 mol% ethylene glycol; density 1196.0 kg/m3; dynamic viscosity 0.222 Pa·s), used here as a representative high-viscosity, heat-sensitive system. Three-dimensional multiphase CFD simulations were performed to examine the combined effects of groove width (2.0–10.0 mm) and scraper tip angle (30–75°) on flow behavior. The results show that a groove width of 7.0 mm increases vorticity gain by 9% and wall shear stress gain by 20% relative to the inline scraper baseline. The grooved geometry generates periodic shear disturbances, promotes radial secondary flow, and strengthens turbulent mixing. A balance between radial mixing enhancement and axial transport continuity is required. Among the tested angles, a tip included angle of 45° produces the highest average vorticity magnitude and more coherent vortex structures. These findings clarify the hydrodynamic regulation mechanism of scraper micro-geometry and support its use as a process-intensification strategy for distiller parameter selection.