Synthetic aperture radar interferometry (InSAR) has emerged as an effective technique for monitoring potentially unstable landslides and has found widespread application. Nevertheless, in mountainous reservoir regions, the precision of time-series InSAR outcomes is often constrained by topography-dependent atmospheric delay (TDAD) effects. To address this limitation, we propose a novel InSAR time-series method that integrates TDAD correction. This approach employs advanced deep learning algorithms to individually model and mitigate TDAD for each interferogram, thereby enhancing the accuracy of small baseline subset InSAR (SBAS-InSAR) and stacking InSAR time-series analyses. Utilizing Sentinel-1 data, we apply this method to identify potential landslides in the Baihetan reservoir area, located in southwestern China, where we successfully identified 26 potential landslide sites. Comparative experimental results demonstrate a significant reduction (averaging 70% and reaching up to 90%) in phase standard deviation (StdDev) in the corrected interferograms, indicating a marked decrease in phase–topography correlation. Furthermore, the corrected time-series InSAR results effectively remove TDAD signals, leading to clearer displacement boundaries and a remarkable reduction in other spurious displacement signals. Overall, this method efficiently addresses TDAD in time-series InSAR, enabling precise identification of potentially unstable landslides influenced by TDAD, and providing essential technical support for early landslide hazard detection using time-series InSAR.
Atmospheric effects are among the primary error sources affecting the accuracy of interferometric synthetic aperture radar (InSAR). The topography-dependent atmospheric effect is particularly noteworthy in reservoir areas for landslide monitoring utilizing InSAR, which must be effectively corrected to complete the InSAR high-accuracy measurement. This paper proposed a topography-dependent atmospheric correction method based on the Multi-Layer Perceptron (MLP) neural network model combined with topography and spatial data information. We used this proposed approach for the atmospheric correction of the interferometric pairs of Sentinel-1 images in the Baihetan dam. We contrasted the outcomes with those obtained using the generic atmospheric correction online service for InSAR (GACOS) correction and the traditional linear model correction. The results indicated that the MLP neural network model correction reduced the phase standard deviation of the Sentinel-1 interferogram by an average of 64% and nearly eliminated the phase-elevation correlation. Both comparisons outperformed the GACOS correction and the linear model correction. Through two real-world examples, we demonstrated how slopes with displacements, which were previously obscured by a significant topography-dependent atmospheric delay, could be successfully and clearly identified in the interferograms following the correction by the MLP neural network. The topography-dependent atmosphere can be better corrected using the MLP neural network model suggested in this paper. Unlike the previous model, this proposed approach could be adjusted to fit each interferogram, regardless of how much of the topography-dependent atmosphere was present. In order to improve the effectiveness of DInSAR and time-series InSAR solutions, it can be applied immediately to the interferogram to retrieve the effective displacement information that cannot be identified before the correction.