Article Defected Ground Structure in the perspective of Microstrip Antennas: A Review was published on June 1, 2010 in the journal Frequenz (volume 64, issue 5-6).
Defected ground structures (DGS) have been developed to improve characteristics of many microwave devices. Although the DGS has advantages in the area of the microwave filter design, microstrip antenna design for different applications such as cross polarization reduction and mutual coupling reduction etc., it can also be used for the antenna size reduction. The etching of a defect in the ground plane is a unique technique for the antenna size reduction. The DGS is easy to be an equivalent LC resonator circuit. The value of the inductance and capacitance depends on the area and size of the defect. By varying the various dimensions of the defect, the desired resonance frequency can be achieved. In this paper the effect of dumbbell shaped DGS, to the size reduction of a microstrip patch antenna is investigated. Then a cavity backed structure is used to increase the efficiency of the microstrip patch antenna, in which the electric walls are placed surrounding the patch. The simulation is carried out with IE3D full wave EM simulator.
20 September 2021 in IEEE Internet of Things Journal
This work presents a design study of an antenna for future railway communications in the context of Internet of Things (IoT). 28-GHz resonance frequency has been considered for the 5G communication systems with end-fire radiations. The size of the proposed antenna array element is 100 mm $\times20$ mm. The shark-fin cover is used to cover the antenna to protect it from the external environmental effects. The proposed antenna along with the 1.3-GHz bandwidth centered at 28 GHz results an expected end-fire radiation ( $\theta =83^{\circ }$ ), with a gain of >10 dBi and its suitability to be installed on the roof of the train for communications to the front and back directions along with the track has been studied and discussed in detail.
1 January 2011 in Progress In Electromagnetics Research M
In this letter, a multiband full-metal-rimmed antenna covering 10 frequency bands for personal wireless communication terminals is presented. The design antenna is based on simple and effective techniques that are used for metal-rimmed smartphone applications. The proposed antenna with full metal rim is designed on RO4350B substrate within the volume of 130 × 70 × 5 mm 3 . We employed RO4350B substrate with inserted vias as metal rim with height of 5 mm, which surrounds the inner circuit board. The circuit board substrate has a ground plane, which is connected to the metal rim via extended substrate patch. This connection divides the rim into two metal rim strips. The combination of these two strips allows the design to operate on 10 bands. Performing perturbation on the ground plane further adds more operating bands and makes the design an excellent candidate for multiband operation. The designed antenna can be used to serve on GSM850/900, GPS, DCS, PCS, UMTS, WiBro at 2.35 GHz, Bluetooth, ISM, SDM-B at 2.65 GHz, WiMAX at 3.5 GHz, and C-band at 4 GHz wireless communication bands. A prototype antenna was fabricated and tested for input reflection coefficient, radiation performances, antenna gain, and efficiency. The measured and simulated results have been presented and discussed.