Most of the driving mechanisms used in micro flapping wing vehicles are gear and linkage transmission mechanisms, which convert the unidirectional rotation of the motor into the reciprocating flapping of the driving mechanism. However, gear and linkage transmission mechanisms occupy a larger space and weight with certain energy losses. This article introduces a drive mechanism that is different from gear and linkage mechanisms, namely the string-based mechanism. In this study, the working principle and various parameters in string-based mechanisms are analyzed, and the flapping trajectory and amplitude of the mechanism is simulated. Following that, this article proposes an improved method of the cam mechanism, designs the trajectory of a cam mechanism, and a physical design is carried out with a driving mechanism width of 22 mm. Subsequently, the experiments are conducted to compare the flapping trajectory of the actual mechanism with the simulation trajectory, thereby verifying the simulation accuracy. The results prove that, in a string-based mechanism, the ratio of the radius of the pulley to the installation radius of the double-layer bearings has a direct impact on the flapping amplitude, and optimizing the design of cam mechanisms can effectively reduce the tensile and relaxation phenomena in string-based mechanisms. The above conclusion was verified in physical experiments, where the modified cam mechanism effectively reduced the stuck phenomenon in the string-based mechanism.

In the design of flapping-wing micro-size air vehicles capable of hovering, wings serve as the primary source of hovering power, making the analysis of aerodynamics and aerodynamic efficiency crucial. Traditional quasi-steady models treat the wings as single rigid plane, neglecting the deformable characteristics of flexible wings. This paper proposes a multi-plane method that, in conjunction with various design parameters of flexible wings in a two-dimensional plane, analyzes their deformation characteristics under the assumption of multiple planes in three-dimensional space, and describes the deformation of wings during flapping. By combining the quasi-steady aerodynamic model, aerodynamic analysis of the deformed wings can be conducted. The relationship between the slack angle, wing flapping position, and wing deformation are analyzed, along with their effects on aerodynamics and aerodynamic efficiency. Experiments validate the deformation patterns of wings during flapping and compare the simulated aerodynamic forces with measured ones. The results indicate that wing deformation can be accurately described by adjusting the parameters in the multi-plane method and that the aerodynamic analysis using this method closely approximates the average lift results. Additionally, the multi-plane method establishes a connection between wing morphology and aerodynamic forces and efficiency, providing valuable insights for aerodynamic analysis.