High-quality ε-Ga2O3 epitaxial layers were grown on a 4H-SiC substrate via MOCVD. A (004) XRC FWHM of the ε-Ga2O3 epitaxial layer as small as 0.09° (341 arcsec) is achieved.
Oxygen vacancies are regarded as crucial defects greatly affecting the electronic and optical properties of oxide films and devices, yet systematic studies on κ-Ga2O3 are still lacking. Herein, we investigate the thermodynamic, electronic, and optical properties of oxygen vacancies in κ-Ga2O3 using density functional theory calculations with the hybrid functional. The electronic structure reveals that oxygen vacancies create a deep donor defect in the bandgap, with defect levels and transition energies influenced by Ga atom displacement and localized electron dynamics. This interplay explains the stability of vacancies at specific sites and their connection to experimentally observed defect levels. Additionally, oxygen vacancies generate distinct absorption and electron energy loss peaks in the ultraviolet range. Our results elucidate the nature of oxygen vacancies, and offering a foundation for tuning and optimizing the electrical and optical properties of κ-Ga2O3 films and improving device performance through defect engineering.
14 December 2023 in IEEE Transactions on Electron Devices
A p-type IrO $_{\textit{x}}$ was first applied to $\beta $ -Ga $_{\text{2}}$ O $_{\text{3}}$ p-n heterojunction diodes (HJDs) in this work. It was fabricated by oxygen ion beam-assisted deposition (IBAD) method with a hole concentration of 10 $^{\text{21}}$ /cm $^{\text{3}}$ . Ir $^{\text{3}+}$ is the main valence state confirmed by X-ray photoelectron spectroscopy (XPS). The bandgap of 2.9 eV was determined by the transmittance spectrum, which is consistent with the HSE06 calculated band structure of Ir $_{\text{2}}$ O $_{\text{3}}$ . p-n HJDs were realized by deposition p-type IrO $_{\textit{x}}$ layer on a lightly doped n-type $\beta $ -Ga $_{\text{2}}$ O $_{\text{3}}$ epitaxial layer without optimized electric field management techniques. A high breakdown voltage ( V $_{\textit{B}}$ ) of 1005 V and a relatively low specific ON-resistance ( R $_{\text{\biosc{on}, sp}}$ ) of 4 m $\Omega $$\cdot$ cm $^{\text{2}}$ were achieved. In particular, the reverse leakage current density remained below 0.1 $\mu$ A/cm $^{\text{2}}$ before breakdown. The results provide a new way to develop high-quality $\beta$ -Ga $_{\text{2}}$ O $_{\text{3}}$ p-n heterojunction.
3 July 2024 in Semiconductor Science and Technology
A suitable semiconductor surface treatment could improve the gate dielectric quality and reduce the interface states and traps to enhance the performance of metal–oxide semiconductor capacitors (MOSCAPs). In this paper, β-Ga2O3 surface treatment using NaOH solution prior to atomic layer deposition of Al2O3 was investigated. In comparison with piranha pretreatment, MOSCAPs with NaOH solution surface pretreatment show a larger maximum accumulation capacitance with less frequency dispersion, reduced charges/traps and interface state density Dit. The improvement in MOSCAPs performance could be attributed to the NaOH solution pretreatment induced slight surface etching effect and relatively effective hydroxylation surface. These results suggest that the process optimization of NaOH solution surface pretreatment could lead to further improvement of β-Ga2O3 MOSCAPs and have a potential in application of β-Ga2O3 metal–oxide semiconductor field-effect transistors in the future.
High-temperature annealing has been regarded as an effective technology to improve the performance of Ga2O3-based solar-blind photodetectors (SBPDs). However, as a metastable phase, ε-Ga2O3 thin film may undergo phase transformation during post-annealing. Therefore, it is necessary to investigate the effect of the phase transition and the defect formation or desorption on the performance of photodetectors during post-annealing. In this work, the ε-Ga2O3 thin films were grown on c-plane sapphire with a two-step method, carried out in a metal-organic chemical vapor deposition (MOCVD) system, and the ε-Ga2O3 metal-semiconductor-metal (MSM)-type SBPDs were fabricated. The effects of post-annealing on ε-Ga2O3 MSM SBPDs were investigated. As a metastable phase, ε-Ga2O3 thin film undergoes phase transition when the annealing temperature is higher than 700 °C. As result, the decreased crystal quality makes an SBPD with high dark current and long response time. In contrast, low-temperature annealing at 640 °C, which is the same as the growth temperature, reduces the oxygen-related defects, as confirmed by X-ray photoelectron spectroscopy (XPS) measurement, while the good crystal quality is maintained. The performance of the SBPD with the post-annealing temperature of 640 °C is overall improved greatly compared with the ones fabricated on the other films. It shows the low dark current of 0.069 pA at 10 V, a rejection ratio (Rpeak/R400) of 2.4 × 104 (Rpeak = 230 nm), a higher photo-to-dark current ratio (PDCR) of 3 × 105, and a better time-dependent photoresponse. These results indicate that, while maintaining no phase transition, post-annealing is an effective method to eliminate point defects such as oxygen vacancies in ε-Ga2O3 thin films and improve the performance of SBPDs.