Olivia Grace Leslie

Ms. Olivia Grace Leslie

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2023 in Sensors
Verified
Journal Article
Open access
PDF file
OLOlivia Grace Leslie
Olivia Grace Leslie
DBDavid Cordova Bulens
David Cordova Bulens
SRStephen Redmond
Stephen Redmond
Real-time multi-axis distributed tactile sensing is a critical capability if robots are to perform stable gripping and dexterous manipulation, as it provides crucial information about the sensor–object interface. In this paper, we present an optical-based six-axis tactile sensor designed in a fingertip shape for robotic dexterous manipulation. The distributed sensor can precisely estimate the local XYZ force and displacement at ten distinct locations and provide the global XYZ force and torque measurements. Its compact size, comparable to that of a human thumb, and minimal thickness allow seamless integration onto existing robotic fingers, eliminating the need for complex modifications to the gripper. The proposed sensor design uses a simple, low-cost fabrication method. Moreover, the optical transduction approach uses light angle and intensity sensing to infer force and displacement from deformations of the individual sensing units that form the overall sensor, providing distributed six-axis sensing. The local force precision at each sensing unit in the X, Y, and Z axes is 20.89 mN, 19.19 mN, and 43.22 mN, respectively, over a local force range of approximately ±1.5 N in X and Y and 0 to −2 N in Z. The local displacement precision in the X, Y, and Z axes is 56.70 μm, 50.18 μm, and 13.83 μm, respectively, over a local displacement range of ±2 mm in the XY directions and 0 to −1.5 mm in Z (i.e., compression). Additionally, the sensor can measure global torques, Tx, Ty, and Tz, with a precision of of 1.90 N-mm, 1.54 N-mm, and 1.26 N-mm, respectively. The fabricated design is showcased by integrating it with an OnRobot RG2 gripper and illustrating real-time measurements during in simple demonstration task, which generated changing global forces and torques.

14 July 2023 in IEEE Sensors Journal
Verified
Journal Article
Open access
OLOlivia Grace Leslie
Olivia Grace Leslie
DBDavid Cordova Bulens
David Cordova Bulens
PUPablo Martinez Ulloa
Pablo Martinez Ulloa
SRStephen Redmond
Stephen Redmond
This paper proposes an optical-based tactile sensor design concept, which uses a light angle and intensity sensor to infer force and displacement from deformations of a silicone pillar. The proposed design uses a simple, low-cost fabrication method with an overall small-scale form factor. The sensor can measure 3D displacement, 3D force, and vibration. The overall displacement estimation error (mean ± SD) in the X, Y, and Z axes was -10.8 ± 52.1 μm, 15.4 ± 66.5 μm and 1.8 ± 17.6 μm, respectively, over a full-scale lateral displacement of 1 mm radius in X and Y and 2.2 mm compression in Z. The overall force estimation error (mean ± SD) was -8.5 ± 47.6 mN, -8.5 ± 49.0 mN and -28.0 ± 92.6 mN for a full-scale force of approximately 2 N in X or Y, and 6 N in Z. Sensitivity to vibrations in the range of 10-950 Hz was also evaluated showing good sensitivity over this entire range. This new sensing approach could be of benefit in robotic manipulation applications, as it could be easily arrayed and/or integrated into the fingers of a robotic gripper to sense slip events and measure load and grip forces and torques.

17 April 2025 in Sensors
Verified
Journal Article
Open access
PDF file
OLOlivia Grace Leslie
Olivia Grace Leslie
DBDavid Cordova Bulens
David Cordova Bulens
SRStephen Redmond
Stephen Redmond
Tactile sensation across the whole hand, including the fingers and palm, is essential for manipulation and, therefore, is expected to be similarly useful for enabling dexterous robot manipulation. Tactile sensation would ideally be distributed (over large surface areas), have a high precision, and provide measurements in multiple axes, allowing for effective manipulation and interaction with objects of varying shapes, textures, friction, and compliance. Given the complex geometries and articulation of state-of-the-art robotic grippers and hands, they would benefit greatly from their surface being instrumented with a thin, curved, and/or flexible tactile sensor technology. However, the majority of current sensor technologies measure tactile information across a planar sensing surface or instrument-curved skin using relatively bulky camera-based approaches; proportionally in the literature, thin and flexible tactile sensor arrays are an under-explored topic. This paper, presents a thin, flexible, non-camera-based optical tactile sensor design as an investigation into the feasibility of adapting our novel LiVec sensing principle to curved and flexible surfaces. To implement the flexible sensor, flexible PCB technology is utilized in combination with other soft components. This proof-of-concept design eliminates rigid circuit boards, creating a sensor capable of providing localized 3D force and 3D displacement measurements across an array of sensing units in a small-thickness, non-camera-based optical tactile sensor skin covering a curved surface. The sensor consists of 16 sensing units arranged in a uniform 4 × 4 grid with an overall size of 30 mm × 30 mm × 7.2 mm in length, width, and depth, respectively. The sensor successfully estimated local XYZ forces and displacements in a curved configuration across all sixteen sensing units, the average force bias values (μ¯) were −1.04 mN, −0.32 mN, and −1.31 mN, and the average precision (SD¯) was 54.49 mN, 55.16 mN and 97.15 mN, for the X, Y, Z axes, respectively, the average displacement bias values (μ¯) were 1.58 μm, 0.29 μm, and −1.99 μm, and the average precision values (SD¯) were 221.61 μm, 247.74 μm, and 44.93 μm for the X, Y, and Z axes, respectively. This work provides crucial insights into the design and calibration of future curved LiVec sensors for robotic fingers and palms, making it highly suitable for enhancing dexterous robotic manipulation in complex, real-world environments.

14 April 2023 in TechRxiv
Verified
Preprint
Open access
OLOlivia Grace Leslie
Olivia Grace Leslie
DBDavid Cordova Bulens
David Cordova Bulens
PUPablo Martinez Ulloa
Pablo Martinez Ulloa
SRStephen Redmond
Stephen Redmond
This paper proposes an optical-based tactile sensor design concept, which uses a light angle and intensity sensor to infer force and displacement from deformations of a silicone pillar. The proposed design uses a simple, low?cost fabrication method with an overall small-scale form factor. The sensor can measure 3D displacement, 3D force, and vibration. The overall displacement estimation error (mean ± SD) in the X, Y, and Z axes was 40.2 µm ± 34.8 µm, 4.0 µm ± 55.3 µm and 13.3 µm ± 11.8 µm, respectively, over a full-scale lateral displacement of 1 mm radius in X and Y and 2.2 mm compression in Z. The overall force estimation error (mean ± SD) was 38.3 ± 29.6 mN, 40.1 ± 29.4 mN and 0.074 ±61.9 mN for a full-scale force of approximately 2 N in X or Y, and 6 N in Z. Sensitivity to vibrations in the range of 10-950 Hz was also evaluated showing good sensitivity over this entire range. This new sensing approach could be of benefit in robotic manipulation applications, as it could be easily arrayed and/or integrated into the fingers of a robotic gripper to sense slip events and measure load and grip forces and torques.

30 August 2024 in TechRxiv
Verified
Preprint
Open access
OLOlivia Grace Leslie
Olivia Grace Leslie
DBDavid Córdova Bulens
David Córdova Bulens
SRStephen J Redmond
Stephen J Redmond
Providing robotic fingers with tactile sensation can enable better performance of dexterous manipulation. Identifying a texture by touch can further the ability of grippers to adjust their grip to the object being contacted. This work presents a non-camera-based optical tactile sensor array capable of discriminating between textures. The texture discrimination method uses sensor waveform amplitude, morphological, and spectral features. We show that an array of sensing units helps achieve high classification accuracy. Using the phase difference between sensing unit signals as a feature allows for good classification regardless of the scanning speed.

27 November 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
OLOlivia Grace Leslie
Olivia Grace Leslie
DBDavid Cordova Bulens
David Cordova Bulens
SRStephen Redmond
Stephen Redmond
Real-time multi-axis distributed tactile sensing is a critical capability if robots are to perform stable gripping and dexterous manipulation, as it provides crucial information about the sensor-object interface. In this paper, we present an optical-based 6-axis tactile sensor designed in a fingertip shape for robotic dexterous manipulation. The distributed sensor can precisely estimate local XYZ force and displacement at ten distinct locations, and provide global XYZ force and torque measurements. Its compact size, comparable to that of a human thumb, and minimal thickness allow seamless integration onto existing robotic fingers, eliminating the need for complex modifications to the gripper. The proposed sensor design uses a simple, low-cost fabrication method. Moreover, the optical transduction approach uses light angle and intensity sensing to infer force and displacement from deformations of individual sensing units that form the overall sensor, providing distributed 6-axis sensing. The local force precision at each sensing unit in the X, Y, and Z axes is 20.89 mN, 19.19 mN, and 43.22 mN, respectively, over an local force range of approximately ±1.5 N in X and Y and 0 to -2 N in Z. The local displacement precision in the X, Y and Z axes is 56.70 μm, 50.18 μm and 13.83 μm, respectively, over a local displacement range of ±2 mm in the XY directions and 0 to -1.5mm in Z (i.e., compression). Additionally, the sensor can measure global torques, Tx, Ty and Tz, with a precision of of 1.90 N-mm, 1.54 N-mm and 1.26 N-mm, respectively. The fabricated design is showcased by integrating it with an OnRobot RG2 gripper and illustrating real-time measurements during in simple demonstration task which generate changing global forces and torques.