Jin Hao

Jin Hao


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 May 2018 in Energies
Verified
Journal Article
Open access
PDF file
MZMinyue Zhou
Minyue Zhou
YZYi fei Zhang
Yi fei Zhang
RZRunqing Zhou
Runqing Zhou
JHJin Hao
Jin Hao
JYJijin Yang
Jijin Yang
The mechanical properties and fracture propagation of Longmaxi shale loading under uniaxial compression were measured using eight cylindrical shale specimens (4 mm in diameter and 8 mm in height), with the bedding plane oriented at 0° and 90° to the axial loading direction, respectively, by micro computed tomography (micro-CT). Based on the reconstructed three-dimensional (3-D) CT images of cracks, different stages of the crack growth process in the 0° and 90° orientation specimen were revealed. The initial crack generally occurred at relatively smaller loading force in the 0° bedding direction specimen, mainly in the form of tensile splitting along weak bedding planes. Shear sliding fractures were dominant in the specimens oriented at 90°, with a small number of parallel cracks occurring on the bedding plane. The average thickness and volume of cracks in the 90° specimen is higher than those for the specimen oriented at 0°. The geometrical characterization of fractures segmented from CT scan binary images shows that a specific surface area correlates with tortuosity at the different load stages of each specimen. The 3-D box-counting dimension (BCD) calculations can accurately reflect crack evolution law in the shale. The results indicate that the cracks have a more complex pattern and rough surface at an orientation of 90°, due to crossed secondary cracks and shear failure.

24 November 2017 in Energies
Verified
Journal Article
Open access
PDF file
JSJiao Su
Jiao Su
YSYingchu Shen
Yingchu Shen
JHJin Hao
Jin Hao
BLBo Liu
Bo Liu
Shale gas content is the key parameter for shale gas potential evaluation and favorable area prediction. Therefore, it is very important to determine shale gas content accurately. Generally, we use the US Bureau of Mines (USBM) method for coal reservoirs to calculate the gas content of shale reservoirs. However, shale reservoirs are different from coal reservoirs in depth, pressure, core collection, etc. This method would inevitably cause problems. In order to make the USBM method more suitable for shale reservoirs, an improved USBM method is put forward on the basis of systematic analysis of core pressure history and temperature history during shale gas degassing. The improved USBM method modifies the calculation method of the gas loss time, and determines the temperature balance time of water heating. In addition, we give the calculation method of adsorption gas content and free gas content, especially the new method of calculating the oil dissolved gas content and water dissolved gas content that are easily neglected. We used the direct method (USBM and the improved USBM) and the indirect method (including the calculation of adsorption gas, free gas and the dissolved gas method) to calculate the shale gas content of 16 shale samples of the Triassic Yanchang Formation in the Southeastern Ordos Basin, China. The results of the improved USBM method show that the total shale gas content is high, with an average of 3.97 m3/t, and the lost shale gas content is the largest proportion with an average of 62%. The total shale gas content calculated by the improved USBM method is greater than that of the USBM method. The results of the indirect method show that the total shale gas content is large, with an average of 4.11 m3/t, and the adsorption shale gas content is the largest proportion with an average of 71%. The oil dissolved shale gas content which should be paid attention to accounts for about 7.8%. The discrepancy between the direct method and indirect method is reduced by using the improved USBM method, and the improved USBM method could be more practical and accurate than the USBM method.

20 April 2021 in Geophysics
Verified
Journal Article
Closed access
JHJin Hao
Jin Hao
GLGuoliang Li
Guoliang Li
JSJiao Su
Jiao Su
YYYuan Yuan
Yuan Yuan
ZDZhongming Du
Zhongming Du
JYJijin Yang
Jijin Yang
Digital rock physics (DRP) is an emerging technique that has rapidly become an indispensable tool to estimate elastic properties. The success of DRP mainly depends on three factors: acquiring a 3D rock structure image, accurately identifying 3D minerals, and using a proper numerical simulation method. Shales present a substantial challenge for DRP owing to their heterogeneous structure, composition, and properties from micron to centimeter scale. To obtain a sufficiently large field-of-view (FOV) image of a sample that reflects the detailed and representative internal structure and composition, we have developed a new DRP workflow to obtain large-FOV high-resolution digital rocks with 3D mineralogical information. Using the “divide-and-stitch” technique, a long shale sample is divided into several subunits, imaged separately by high-resolution X-ray microscopy (XRM), and then stitched to obtain a large-FOV 3D digital rock. An FOV of a rock cylinder (736 μm in diameter, 2358 μm in height, and 1 μm resolution) is used as an example. By correlating XRM and automated mineralogy, a large-FOV 3D mineral digital rock is obtained from a shale sample. Six mineral phases are identified and verified by automated mineralogy, and four laminae are detected according to the grain size, which offer a new perspective to study sedimentary processes and heterogeneities at the millimeter scale. The finite-difference method is used to compute the elastic properties of the large-FOV 3D mineral digital rock, and the results of Young’s modulus are within the limit of the Voigt/Reuss bounds. It also reveals that there is a difference in simulated elastic properties in the four laminae. The large-FOV 3D mineral digital rock offers the potential to explore the relationship between elastic properties and mineral phases, as well as the heterogeneities of elastic properties at the millimeter scale.

9 October 2017 in Preprints.org
Verified
Preprint
Open access
PDF file
JSJiao Su
Jiao Su
YSYingchu Shen
Yingchu Shen
BLBo Liu
Bo Liu
JHJin Hao
Jin Hao
Shale gas content is the key parameter for shale gas potential evaluation and favorable area prediction. Therefore, it is very important to determine shale gas content accurately. Generally, we use the USBM method for coal reservoirs to calculate gas content of shale reservoirs. However, shale reservoirs are different from coal reservoirs in depth, pressure, core collection, etc. This method would inevitably cause problems. In order to make the USBM method more suitable for shale reservoir, an improved USBM method is put forward on the basis of systematic analysis of core pressure history and temperature history during shale gas desorption. The improved USBM method modifies the calculation method of the lost time, and determines the temperature balance time of water heating. In addition, we give the calculation method of adsorption gas content and free gas content, especially the new method of calculating the oil dissolved gas content and water dissolved gas content which are easily neglected. We used the direct method (USBM and the improved USBM) and the indirect method (adsorption gas, free gas and dissolved gas) to calculate the shale gas content of 16 shale samples of the Triassic Yanchang Formation in the Southeastern Ordos Basin, China. The results of the improved USBM method show that the total shale gas content is high, with an average of 3.97 m3/t, and the lost shale gas content is the largest proportion with an average of 62%. The total shale gas content calculated by the improved USBM method is greater than that of the USBM method. The results of the indirect method show that the total shale gas content is large, with an average of 4.11 m3/t, and the adsorption shale gas content is the largest proportion with an average of 71%. The oil dissolved shale gas content which should be taken attention accounts for about 7.8%. The relative error between the improved USBM method and indirect method is much smaller than that between USBM method and indirect method, which verifies the accuracy of the improved USBM method.