This research focused on utilizing banana peel as the primary material for producing mesoporous biomass charcoal through one-step potassium hydroxide activation. Subsequently, the biomass charcoal underwent high-temperature calcination with varying impregnation ratios of KOH : BC for different durations in tubular furnaces set at different temperatures. The resultant biomass charcoal was then subjected to hydrothermal treatment with FeCl3·6H2O to produce biochar/iron oxide composites. The adsorption capabilities of these composites towards methylene blue (MB) were examined under various conditions, including pH (ranging from 3 to 12), temperature variations, and initial MB concentrations (ranging from 50 to 400 mg L−1). The adsorption behavior aligned with the Langmuir model and demonstrated quasi-secondary kinetics. After five adsorption cycles, the capacity decreased from 618.64 mg g−1 to 497.18 mg g−1, indicating considerable stability. Notably, Fe3O4–N-BC exhibited exceptional MB adsorption performance.
The aminated sodium lignosulfonate (AELS) was prepared through a Mannich reaction and characterized via FT-IR, TG, SEM and XPS in this study. Subsequently, the adsorption capacity of AELS for methyl blue (MB) was evaluated under various conditions such as pH, adsorbent dosage, contact time, initial concentration and temperature. The adsorption kinetics, isotherms and thermodynamics of AELS for methyl blue were investigated and analyzed. The results were found to closely adhere to the pseudo-second-order kinetic model and Langmuir isotherm model, suggesting a single-molecular-layer adsorption process. Notably, the maximum adsorption capacity of AELS for methyl blue (153.42 mg g−1) was achieved under the specified conditions (T = 298 K, MAELS = 0.01 g, pH = 6, VMB = 25 mL, C0 = 300 mg L−1). The adsorption process was determined to be spontaneous and endothermic. Following five adsorption cycles, the adsorption capacity exhibited a minimal reduction from 118.99 mg g−1 to 114.33 mg g−1, indicating good stability. This study contributes to the advancement of utilizing natural resources effectively and sustainably.
Cellulose-based carbon (CBC) is widely known for its porous structure and high specific surface area and is liable to adsorb gas molecules and macromolecular pollutants. However, the application of CBC in gas sensing has been little studied. In this paper, a ZnO/CBC heterojunction was formed by means of simple co-precipitation and high-temperature carbonization. As a new ammonia sensor, the prepared ZnO/CBC sensor can detect ammonia that the previous pure ZnO ammonia sensor cannot at room temperature. It has a great gas sensing response, stability, and selectivity to an ammonia concentration of 200 ppm. This study provides a new idea for the design and synthesis of biomass carbon–metal oxide composites.
Covalent organic frameworks (COFs) have gained significant attention as next-generation electrode materials for energy storage, owing to their chemical versatility, ecofriendliness, and cost-effectiveness. However, their practical application in energy storage systems is hindered by challenges such as insufficient exposure of functional groups for sodium storage and poor ion/electron transport kinetics. In this work, we developed an organic-inorganic heterojunction structure by in situ growth of an imine-based COF on the surface of MXene, which was employed as an anode material for sodium-ion batteries. This heterojunction design enhances sodium ion and electron transport, while the porous COF layer maximizes the exposure of active sites. In situ FT-IR and Raman spectroscopy analyses reveal that the C=N and C=C functional groups in the COF@D-Ti3C2T x electrode enable reversible sodium-ion storage. Furthermore, the flexible hydrogen bonds between the COF and MXene layers effectively mitigate volume expansion during cycling, improving the structural stability and long-term cycling performance. As a result, the COF@D-Ti3C2T x composite electrode delivers a remarkable reversible capacity of 401.6 mA h g-1 after 300 cycles at 0.1 C. This work not only introduces a novel synthesis strategy for imine-based COFs but also explores sodium-active reaction units and organic-inorganic heterojunction designs, offering new insights for advancing rechargeable battery technologies.