The modelling method based on decoupling the simulation of the cathodic part of the arc (the cathode and the near-cathode non-equilibrium plasma layer) from the simulation of the arc on the whole has been extended to cathodes of arc plasma torches, consisting of an insert with a conical tip, made of pure or doped tungsten, and a surrounding water-cooled copper holder. The method was validated by comparison with the experiment, performed on a 200 A DC arc in atmospheric-pressure argon. Standard work function of polycrystalline tungsten of 4.54 eV was used for modelling of pure-tungsten insert and a good agreement with the experiment was found with respect to both the insert tip shape and the temperature distribution in the tip, recorded in the stable operation mode. There are no unambiguous data on the work function for arc cathodes made of doped tungsten, although in situ measurements of the effective work function of cathodes of high-pressure arc discharges provide useful hints. On the other hand, the experiments reported in this work show that the tip temperatures of inserts made of tungsten doped with 1.5 % of thorium, or lanthanum, or yttrium, recorded during the stable-mode operation at the arc current of 200 A, vary in a rather narrow range 3100–3200 K. This suggests that the work functions of doped tungsten inserts, operated in the stable mode, are close to each other as well. Indeed, the results of modelling with the same value of the work function of 3 eV give a reasonably good agreement with the experiment in all three cases.

The work presented is devoted to new approaches to increasing the superhydrophobic properties of coatings based on zinc oxide (ZnO) and titanium dioxide (TiO₂). There is an innovation in the use of inorganic coatings with a non-polar structure, high melting point, and good adhesion to ZnO, in contrast to the traditionally used polymer coatings with low performance characteristics. The maximum superhydrophobicity of the ZnO surface (contact angle of 173°) is achieved after coating with a layer of hematite (Fe₂O₃). The reason for the abnormally high hydrophobicity is a combination of factors: minimization of the area of contact with water (Cassie state) and the specific microstructure of a coating with a layer of non-polar Fe₂O₃. It was shown that the coating of ZnO structures with bimodal roughness with a gold (Au) layer that is 60-nm thick leads to an increase in the wetting contact angle from 145° to 168°. For clean surfaces of Au and hematite Fe₂O₃ films, the contact angle wets at no more than 70°. In the case of titanium oxide coatings, what is new lies in the method of controlled synthesis of a coating with a given crystal structure and a level of doping with nitrogen using plasma technologies. It has been shown that the use of nitrogen plasma in an open atmosphere with different compositions (molecular, atomic) makes it possible to obtain both a hydrophilic (contact angle of 73°) and a highly hydrophobic surface (contact angle of 150°).

The search for a simple, scalable, and eco-friendly method for synthesizing micro-sized photocatalysts is an urgent task. Plasma technologies are highly effective and have wide possibilities for targeted synthesis of novel materials. The mass-average temperature of plasma treatment is higher than the stability temperature of anatase and brookite, the most photoactive polymorphs of titanium dioxide. In this work, by optimizing the plasma treatment conditions and selecting source materials, a method for synthesizing micro-sized photocatalyst based on heterocomposite TiO₂/ZnO particles with high anatase content is proposed. The synthesis method involves treating a powder mixture of titanium and zinc by low-temperature argon plasma under atmospheric conditions. The relationship between the structural-phase composition, morphology, and photocatalytic properties of the microparticles was investigated. A model for the synthesis of composite microparticles containing anatase, rutile, and heterostructural contact with zinc oxide is proposed. The photocatalytic degradation of methylene blue and metronidazole was studied to evaluate both sensitized and true photocatalytic processes. The metronidazole degradation confirmed the intrinsic photocatalytic activity of the synthesized composites. Additionally, the features of photocatalysis under UV and solar irradiation were studied, and a photocatalysis mechanism is proposed. The synthesized micro-sized heterocomposite photocatalyst based on TiO₂/ZnO contained anatase (36%), rutile (60), and brookite (4%) and showed a photocatalytic activity during the methylene blue degradation process under UV irradiation (high-pressure mercury lamp, 250 W): 99% in 30 min.

The influence of the electric field on a single air bubble in transformer oil has been studied. It has been shown that, depending on its size, the bubble may initiate breakdown. The sizes of air and sulfur hexafluoride bubbles at which breakdown will not be observed have been estimated based on the condition for the avalanche-to-streamer transition.

The presented work studies the processes of synthesis of ZnO microstructures using atmospheric-pressure microwave nitrogen plasma and investigates their photocatalytic activity in the processes of degradation of 2,4-dinitrophenol and the antibiotic ciprofloxacin when irradiated with sunlight. The work proposes an effective method for formation of photosensitive ZnO powders. Due to the features of plasma treatment in the open atmosphere of zinc metal microparticles, ZnO structures are formed with sizes from hundreds of nanometers to several micrometers with various micromorphologies. The lattice parameters of ZnO structures are characteristic of a hexagonal unit with a = 3.258 Å and c = 5.21 Å, volume 47.95 ų. The size of the crystallites is 48 nm. The plasma treatment was performed by means of a 2.45-GHz plasmatron at a power input of 1 kW in nitrogen flow at a rate of 1–10 L/min. Zn microparticles were injected into the microwave plasma at a mass rate of 20 g/min. High photoactivity was demonstrated (rate constants 0.036 min⁻¹ and 0.051 min⁻¹) of synthesized ZnO structures during photo-degradation of 2,4-dinitrophenol and ciprofloxacin, respectively, when exposed to solar radiation. Photo-active structures of ZnO synthesized using microwave plasma can find application in processes of mineralization of toxic organic compounds. Structures of ZnO synthesized using microwave plasma can find application in processes of mineralization of toxic organic compounds, and also in scintillation detectors, phosphors.