1,2-Propylene oxide (PO, C₃H₆O) is considered as a promising agent for improving fuel. In this work, the effect of PO additives on the species pool in a premixed burner-stabilized fuel-rich (ϕ = 1.6) flame fueled by n-heptane/toluene mixture (7/3 by volume of liquids) at atmospheric pressure is studied by the flame-sampling molecular beam mass spectrometry and numerical modeling in order to get insight into the chemical aspects of the influence of oxygenates with an epoxy group on the formation of abundant intermediates (including PAH precursors) during combustion of fossil fuels. The flames with various loadings of PO in the fuel blend (from 0 to 16.3% in mole basis) are examined, and detailed kinetic mechanisms available in the literature are validated against the measurements of mole fraction profiles of reactants, major products, and many intermediate species. A higher reactivity of the fresh mixture and a reduction in the peak mole fractions of intermediates playing an important role in PAH formation (benzene, styrene, ethylbenzene, phenol, acetylene, diacetylene, etc.) are observed when PO is added. This was found to be due to simultaneously two factors: the partial replacement of "sooting" fuel (toluene, which is the main precursor of these species) with oxygenated additive, and the changes in the flame radical pool caused by PO addition. Propylene oxide additive was found to change the ratio between H, OH, O, and CH₃ toward an increase in the proportion of O and CH₃. The detailed kinetic mechanisms considered in the work are found to overpredict the peak mole fraction of acetylene, a key species playing a crucial role in PAH growth. Its chemistry is revisited in order to provide a better prediction of C₂H₂ and, as a result, PAHs.

Understanding and controlling the combustion of clean and efficient fuel blends, like methane + hydrogen, is essential for optimizing energy production processes and minimizing environmental impacts. To extend the available experimental database on CH₄ + H₂ flame speciation, this paper reports novel measurement data on the chemical structure of laminar premixed burner-stabilized CH₄/H₂/O₂/Ar flames. The experiments cover various equivalence ratios (φ = 0.8 and φ = 1.2), hydrogen content amounts in the CH₄/H₂ blend (X_H2 = 25%, 50% and 75%), and different pressures (1, 3 and 5 atm). The flame-sampling molecular-beam mass spectrometry (MBMS) technique was used to detect reactants, major products, and several combustion intermediates, including major flame radicals. Starting with the detailed model AramcoMech 2.0, two reduced kinetic mechanisms with different levels of detail for the combustion of CH₄/H₂ blends are reported: RMech1 (30 species and 70 reactions) and RMech2 (21 species and 31 reactions). Validated against the literature data for laminar burning velocity and ignition delays, these mechanisms were demonstrated to reasonably predict the effect of pressure and hydrogen content in the mixture on the peak mole fractions of intermediates and adequately describe the new data for the structure of fuel-lean flames, which are relevant to gas turbine conditions.