Performance (availability and yield) and reliability of wind turbines can make the difference between success and failure of wind farm projects and these factors are vital to decrease the cost of energy. During the last years, several initiatives started to gather data on the performance and reliability of wind turbines on- and offshore and published findings in different journals and conferences. Even though the scopes of the different initiatives are similar, every initiative follows a different approach and results are therefore difficult to compare. The present paper faces this issue, collects results of different initiatives and harmonizes the results. A short description and assessment of every considered data source is provided. To enable this comparison, the existing reliability characteristics are mapped to a system structure according to the Reference Designation System for Power Plants (RDS-PP^®). The review shows a wide variation in the performance and reliability metrics of the individual initiatives. Especially the comparison on onshore wind turbines reveals significant differences between the results. Only a few publications are available on offshore wind turbines and the results show an increasing performance and reliability of offshore wind turbines since the first offshore wind farms were erected and monitored.

Operational managers of wind turbines usually monitor a big fleet of turbines and thus need highly condensed information to identify underperforming turbines and to prioritize their work. Key performance indicators (KPIs) are a solid and frequently used tool for this purpose. However, the KPIs used in the wind industry are not unified to date, which makes comparison in the industry difficult. Further, comprehensive standards on a set of KPIs for the wind industry are missing. This article identifies and recommends KPIs and provides detailed definitions to make KPIs comparable and to enable benchmarking. The starting point of this work is an industry survey with 28 participants intended to identify commonly used KPIs, collect various possible definitions, and prioritize them. Out of a total of 50 KPIs, we discuss in a next step 33 selected KPIs on performance, maintenance, and reliability in detail and recommend definitions, most of which are based on international standards. As a result, operators can easily use these recommendations to base their system of KPIs. By using this unified set of KPIs, operators can be well-prepared to conduct industrywide comparisons and benchmarks. The survey and this article will also serve as a basis for committee work of the FGW e.V. to develop a corresponding technical guideline.

Energy generation and consumption in the power grid must be balanced at every single moment. Within the synchronous area of continental Europe, flexible generators and loads can provide Frequency Containment Reserve and Frequency Restoration Reserve marketed through the balancing markets. The Transmission System Operators use these flexibilities to maintain or restore the grid frequency when there are deviations. This paper shows the future flexibility potential of Germany’s household sector, in particular for single-family and twin homes in 2025 and 2030 with the assumption that households primarily optimize their self-consumption. The primary focus is directed to the flexibility potential of Electric Vehicles, Heat Pumps, Photovoltaics and Battery Storage Systems. A total of 10 different household system configurations were considered and combined in a weighted average based on the scenario framework of the German Grid Development Plan. The household generation, consumption and storage units were simulated in a mixed-integer linear programming model to create the time series for the self-consumption optimized households. This solved the unit commitment problem for each of the decentralized households in their individual configurations. Finally, the individual household flexibilities were evaluated and then aggregated to a Germany-wide flexibility profile for single-family and twin homes. The results indicate that the household sector can contribute significantly to system stabilization with an average potential of 30 GW negative and 3 GW positive flexibility in 2025. In 2030, the corresponding flexibilities potentially increase to 90 GW and 30 GW, respectively. This underlines that considerable flexibility reserves could be provided by single-family and twin homes in the future.

Key performance indicators (KPIs) are commonly used in the wind industry to support decision-making and to prioritize the work throughout a wind turbine portfolio. Still, there is little knowledge of the uncertainties of KPIs. This article intends to shed some light on the uncertainty and reliability of KPIs in general and performance KPIs in particular. For this purpose, different uncertainty causes are discussed, and three data handling related uncertainty causes are analyzed in detail for five KPIs. A local sensitivity analysis is followed by a more detailed analysis of the related uncertainties. The work bases on different sets of operational data, which are manipulated in a large number of experiments to carry out an empirical uncertainty analysis. The results show that changes in the data resolution, data availability, as well as missing inputs, can cause considerable uncertainties. These uncertainties can be reduced or even mitigated by simple measures in many cases. This article provides a comprehensive list of statements and recommendations to estimate the relevance of data handling related KPI uncertainties in the day-to-day work as well as approaches to correct KPIs for systematic deviations and simple steps to avoid pitfalls.

Offshore wind energy use is commonly suggested to play an important role in future electricity supply. However, long-term experience with thousands of onshore wind turbines explicitly hint on possible barriers for a safe, efficient, economic and user friendly supply relying on offshore wind energy. A national German programme shall on the one hand support the wind energy sector improving technology and O&M procedures towards higher reliability and availability, and on the other hand monitor the development in terms of techniques, electricity yields and cost. In the following, this scientific monitoring programme, the 'OffshoreWMEP', is presented. The actual challenge of this programme is to convince numerous players with diverse points of interest to collaborate in gathering data and providing it for a jointly utilized database

With the background of numerous wind turbines phasing out of fixed feed‐in tariffs in the following years and an increasing share of negative electricity market prices on the spot market, the availability definitions of “time‐based” and “production‐based” availability are possibly no longer suitable for assessing the overall performance of a wind turbine. This paper introduces a novel definition: the “monetary‐based” availability. The differences between the established definitions and the “monetary‐based” availability are highlighted by comparing the measures on an empirical data set. Furthermore, results on the impact of scheduling planned downtimes towards a monetary‐based optimum show that revenues can be increased. By shifting only a small share of the annual downtime to an optimum to maximize the revenue from electricity, a strong increase in additional earnings and thereby an increasment of the monetary‐based availability can be achieved.