Leonardo Marchiori

Mr. Leonardo Marchiori

Civil Engineering and Architecture, University of Beira Interior, Covilhã, Castelo Branco, Portugal
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
TTTulio Watanabe Takao
Tulio Watanabe Takao
VBVivian Silveira dos Santos Bardini
Vivian Silveira dos Santos Bardini
AJAMANDA MARIA DANTAS DE JESUS
AMANDA MARIA DANTAS DE JESUS
Leonardo MarchioriLeonardo Marchiori
Leonardo Marchiori
Antonio AlbuquerqueAntonio Albuquerque
Antonio Albuquerque
FPFabiana Alves Fiore Pinto
Fabiana Alves Fiore Pinto
Water treatment sludge (WTS) is the residue produced during water treatment processes for public use. Exploring the reintroduction of these wastes into the production chain to generate new, value-added materials presents a current challenge. This could promote their reuse and reduce the negative environmental impacts associated with their disposal. This study assessed the technical feasibility of using aluminum-based WTS to partially replace silty sand soil in mixtures that include two stabilizers (hydrated lime and Portland cement), potentially for use in road pavements. After conducting a thorough physical, chemical, and geotechnical characterization of both the soil and the sludge, bench-scale experiments were carried out to test the mixtures’ resistance, with WTS proportions of 5%, 8%, 10%, 15%, and 20%, stabilized with either lime or cement. The findings confirm that WTS does not contain potentially toxic elements, according to Brazilian standards, and all tested composites appear suitable for paving. However, the mechanical resistance of the soil–sludge–cement mixtures decreases as the WTS content increases, with an optimum California bearing ratio (CBR) of 41.50% achieved at a 5% WTS addition. Meanwhile, incorporating 15% WTS into soil–sludge–lime mixtures resulted in the highest CBR value of 21.25% for this type of mixture. It is concluded that incorporating stabilizers into soil–WTPS mixtures for road construction allows for an increased percentage of WTPS in silty-sandy soils. Further studies are recommended with different soil types and the addition of fibers to the mixes, to assess the long-term performance of the structure, along with economic and environmental analyses.

25 June 2025 in Journal of Environmental Management
Verified
Journal Article
Open access
Leonardo MarchioriLeonardo Marchiori
Leonardo Marchiori
MMMaria Vitoria Morais
Maria Vitoria Morais
Josivaldo SátiroJosivaldo Sátiro
Josivaldo Sátiro
AAAntonio Albuquerque
Antonio Albuquerque
LPLuis Andrade Pais
Luis Andrade Pais
Victor CavaleiroVictor Cavaleiro
Victor Cavaleiro
Clays and geosynthetics are the main materials for hydraulic barriers due to low conductivity for environmental protection. However, high costs and lack of disponibility generate the need for alternatives. Therefore, linked to immediate action regarding reducing the amount of waste generated and developing strategies for preventing contamination, industrial waste has emerged as alternative liner materials. They seem to represent a potential resource of geotechnically applicable materials to substitute, or as amendment, for clays and geosynthetics. Many disposed materials have been studied as geomaterial and showed promising results, although an evaluation of the properties must be carried out. Thus, this work reviews industrial by-products acting as liner materials, their geotechnical properties, treatment needed, compaction energy, compressibility, shear resistance, chemical and mineralogical composition, methodological approaches, lack of research and opportunities for future investigations. The selected sources were waterworks sludges (WS), vegetal-based biomass ashes (BA), mining wastes (MW), and steel slags (SS) by-products, most of the literature achieved hydraulic conductivity of 10-9 m/s when dealing with those wastes and treating biogeochemically. It is possible to reach the best ratios mixing with soils of up to 20 % for WS and BA, 50 % for SS and even 100 % of MW, creating a wide range of waste-based geocomposites. The reviews comprise recent literature on alternative materials providing insights into future investigation looking to develop sustainable practices and new waste-based materials.

30 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
Leonardo MarchioriLeonardo Marchiori
Leonardo Marchiori
Maria Vitoria Vieira MoraisMaria Vitoria Vieira Morais
Maria Vitoria Vieira Morais
ASAndré Studart
André Studart
Antonio AlbuquerqueAntonio Albuquerque
Antonio Albuquerque
LPLuis José Andrade Pais
Luis José Andrade Pais
Victor CavaleiroVictor Cavaleiro
Victor Cavaleiro
Geoenvironmental engineering involves defining solutions for complex problems, such as containment systems management, contaminant transport control, wastewater management, remediation of contaminated sites and valorization of geomaterials and wastes. In the last years, energy harvesting (EH)—or energy scavenging—methods and technologies have been developed to reduce the dependence on traditional energy sources, namely fossil fuels, and nuclear power, also responding to the increase in energy demands for human activities and to fulfill sustainable development goals. EH in geoenvironmental works and the surrounding soil and water environment includes a set of processes for capturing and accumulating energy from several sources considered wasted or unusable associated with soil dynamics; the stress and strain of geomaterials, hydraulic, vibrations, biochemical, light, heating and wind sources can be potential EH systems. Therefore, this work presents a review of the literature and critical analysis on the main opportunities for EH capturing, accumulating and use in geoenvironmental works, among basic electric concepts and mechanisms, analyzing these works in complex conditions involving biological-, chemical-, mechanical-, hydraulic- and thermal-coupled actions, concluding with the main investigation and challenges within geoenvironmental aspects for EH purposes.

22 September 2021 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
Leonardo MarchioriLeonardo Marchiori
Leonardo Marchiori
ASAndré Studart
André Studart
Antonio AlbuquerqueAntonio Albuquerque
Antonio Albuquerque
VCVictor Cavaleiro
Victor Cavaleiro
Abilio P. SilvaAbilio P. Silva
Abilio P. Silva
A water treatment sludge (WTS) was characterized in order to evaluate if its properties would be suitable for use as liner of earthworks or for strengthening a clay soil. A WTS and a clayey soil was characterized in terms of granulometry, cumulative volumes, specific surface, density, plastic limit, liquid limit, water content, hydraulic conductivity, and characteristics of compaction (optimal water content and dry density). This study aimed to exhibit and evaluate these investigated parameters of WTS, soft soil and mixed proportions between the materials for liners’ material production while evaluating soft soils’ reinforcement feasibility. The results have shown WTS’s contribution with its fine granulometry and compaction characteristics, indicating filling properties and possible feasibility as soft soils additions for liners’ material production while being applicable for soils‘ reinforcements, corroborating with existing literature on the subject. Thus, the currently developed investigation has exposed WTS as a potential addition for these applications while also attending society’s new demands towards a more sustainable future.

10 January 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Maria Vitoria Vieira MoraisMaria Vitoria Vieira Morais
Maria Vitoria Vieira Morais
Leonardo MarchioriLeonardo Marchiori
Leonardo Marchiori
Josivaldo SátiroJosivaldo Sátiro
Josivaldo Sátiro
Antonio AlbuquerqueAntonio Albuquerque
Antonio Albuquerque
Victor CavaleiroVictor Cavaleiro
Victor Cavaleiro
The application of geotextiles as filter materials in various systems, such as biofilters, wetlands, and wastewater treatment plants, has grown significantly in recent years. The ability of these materials to support biofilm growth makes them ideal for the removal of organic and inorganic contaminants present in wastewater. The objective of this research was to analyze clogging through variations in permeability, using column tests for 80 days with two types of nonwoven geotextiles with different grammages (GT120 and GT300), as well as to study the efficiency in the removal of organic matter. A synthetic wastewater was used, allowing the specific observation of biological clogging and the treatment carried out exclusively by microorganisms. The results indicated that bioclogging was not a significant factor within the experimental period. Through the mass test, a continuous increase in biofilm growth over time was observed for both geotextiles. For scanning electron microscopic (SEM) images, GT300 presented a larger biofilm area. A higher removal of COD (80%), N (52%), and P (36%) by microorganisms present in GT300 was found, which appears to be associated with its greater thickness and weight. The higher mesh density provides a larger area for the growth of microorganisms, allowing a greater amount of biomass to establish itself and contributing to the efficient removal of pollutants. These findings highlight the potential of using geotextile filters in wastewater treatment applications, where biofilm growth can positively contribute to contaminant removal without immediately compromising permeability.

21 February 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Leonardo MarchioriLeonardo Marchiori
Leonardo Marchiori
Antonio AlbuquerqueAntonio Albuquerque
Antonio Albuquerque
LPLuis José Andrade Pais
Luis José Andrade Pais
Maria Eugenia Gimenez BoscovMaria Eugenia Gimenez Boscov
Maria Eugenia Gimenez Boscov
Victor CavaleiroVictor Cavaleiro
Victor Cavaleiro
Geoenvironmental engineered barriers, such as geotechnical and hydraulic layered structures called liners, are essential for protecting the environment from pollution. Liners are usually compacted clay liners (CCL), geomembranes (GM), geosynthetic clay liners (GCL), or a combination of these liners (composite liners), which require significant attention concerning materials, techniques, and procedures to perform adequately. This work reviews the function of geotechnical and hydraulic barriers as liners and highlights the lack of investigation and problematic aspects of them. In addition, the work provides an overview of the literature around earthworks which are liners’ specific configurations, such as landfills, dams, ponds, wastewater lagoons, and vertical barriers. Furthermore, the main investigations, issues, and perspectives are demonstrated, and are discussed alongside the trending research areas and sustainable new materials. This work highlights different directives in several countries for liner construction standards and testing program specifications, analyzing their economic aspects. The main studies on the subject have been compiled, and a bibliometric analysis was performed. Thus, this paper concludes by pointing out gaps in the research regarding alternative materials and structures within geoenvironmental investigations on liners, and signposts future scientific threads related to sustainable development.