A promising clinical trial utilizing gold-silica core-shell nanostructures coated with polyethylene glycol (PEG) has been reported for near-infrared (NIR) photothermal therapy (PTT) of prostate cancer. The next critical step for PTT is the visualization of therapeutically relevant nanoshell (NS) concentrations at the tumor site. Here we report the synthesis of PEGylated Gd 2 O 3 -mesoporous silica/gold core/shell NSs (Gd 2 O 3 -MS NSs) with NIR photothermal properties that also supply sufficient MRI contrast to be visualized at therapeutic doses (≥10 8 NSs per milliliter). The nanoparticles have r1 relaxivities more than three times larger than those of conventional T1 contrast agents, requiring less concentration of Gd 3+ to observe an equivalent signal enhancement in T1 -weighted MR images. Furthermore, Gd 2 O 3 -MS NS nanoparticles have r2 relaxivities comparable to those of existing T2 contrast agents, observed in agarose phantoms. This highly unusual combination of simultaneous T1 and T2 contrast allows for MRI enhancement through different approaches. As a rudimentary example, we demonstrate T1 / T2 ratio MR images with sixfold contrast signal enhancement relative to its T1 MRI and induced temperature increases of 20 to 55 °C under clinical illumination conditions. These nanoparticles facilitate MRI-guided PTT while providing real-time temperature feedback through thermal MRI mapping.
As the architecture of logic devices is evolving towards gate-all-around (GAA) structure, research efforts on advanced transistors are increasingly desired. In order to rapidly perform accurate compact modeling for these ultra-scaled transistors with the capability to cover dimensional variations, neural networks are considered. In this paper, a compact model generation methodology based on artificial neural network (ANN) is developed for GAA nanosheet FETs (NSFETs) at advanced technology nodes. The DC and AC characteristics of GAA NSFETs with various physical gate lengths (Lg), nanosheet widths (Wsh) and thicknesses (Tsh), as well as different gate voltages (Vgs) and drain voltages (Vds) are obtained through TCAD simulations. Subsequently, a high-precision ANN model architecture is evaluated. A systematical study on the impacts of ANN size, activation function, learning rate, and epoch (the times of complete pass through the entire training dataset) on the accuracy of ANN models is conducted, and a shallow neural network configuration for generating optimal ANN models is proposed. The results clearly show that the optimized ANN model can reproduce the DC and AC characteristics of NSFETs very accurately with a fitting error (MSE) of 0.01.
5 February 2024 in IEEE Transactions on Electron Devices
In this article, we evaluate various crystal orientation configurations for silicon ultrascaled nanosheet FETs (NSFETs) to explore the optimum combination of wafer surface and channel orientations. The increasingly prominent physical phenomena, including quantum confinement and quasi-ballistic transport, are captured physically by advanced simulation methodology. The carrier density profile and transport-related parameters exhibit a strong dependence on the crystallographic orientations of the channel and the wafer directions. The quantum confinement effects are least pronounced in the n-type NSFETs with a (100) surface, and the p-type NSFETs with a (110) surface. The $ \langle \text{100} \rangle$ and $ \langle \text{111} \rangle$ channel orientations demonstrate the largest ballistic injection velocity for electrons and holes, respectively. Uniaxial stress technology, as an efficient performance booster, may further improve the transport properties, but the enhancement may saturate at high stress level. In the ballistic limit, we predict that the homo-oriented CMOS inverter of $\text{(}\text{110}\text{)}/\langle \text{111} \rangle$ configuration has a more balanced N/P current, and the hetero-oriented CMOS inverter, comprising a 5 ${\times}$ 10 nm n-type NSFET of $\text{(}\text{100}\text{)}/\langle \text{100} \rangle$ and a 5 ${\times}$ 10 nm p-type NSFET of $\text{(}\text{110}\text{)}/\langle \text{111} \rangle$ , will yield a speed enhancement exceeding 20% when compared with the prevailing industry standard of the $\text{(}\text{100}\text{)}/\langle \text{110} \rangle$ configuration.
7 July 2023 in IEEE Transactions on Electron Devices
This article proposes a novel zigzag-cell design for the six-transistor static random access memory (SRAM) bitcell in the complementary field-effect transistor (CFET) framework. The zigzag-cell design not only maintains the aggressive area reduction but also allows for shorter bitlines, directly benefiting from the circuit layout changes caused by the CFET architecture. The specific layouts of the zigzag-cell design are introduced by incorporating them into two process flows with different complexity. The first assumed process flow contains only the essential steps of CFET SRAM, and according to which the zigzag-cell bitcell can achieve an area reduction of more than 20% over the thin-cell bitcell. Moreover, the performance of zigzag-cell SRAM is also improved by 4.6% and 16.3% in read time and write margin, respectively. Following the second more complicated process flow, the zigzag-cell design does not offer further area reduction compared with the thin-cell design, but it needs fewer metal layers. The proposed design is a promising choice for the CFET SRAM bitcell layout.
This letter reports a study on statistical variability of random dipole fluctuation-induced variation (DFV) in gate-all-around (GAA) nanosheet devices that adopt the interface dipole engineering technique for V t modulation, a new intrinsic device variability source that has yet been reported. The impact of DFV with the incorporation of La and Al is characterized by threshold voltage standard deviations (σ Vt ), which are 3.7–8.2 mV and 7.7–17.2 mV for the dipole-induced potential shifts of 100–500 meV in the calibrated NFET and PFET devices, respectively. DFV follows the Pelgrom law. When device shrinks, σ Vt due to DFV will increase inversely proportional to the square root of channel area. Furthermore, as a new source of variability, DFV is compared with metal grain granularity (MGG), random dopant fluctuation (RDF), and oxide thickness variation (OTV) using the statistical impedance field method (sIFM) simulation technique. The results show that DFV contributes 10% (NFET) and 25% (PFET) to the overall variation when the dipole-induced potential shifts are set at 300 meV, indicating that DFV is a significant contributor to device variability with importance second only to MGG.
11 October 2024 in IEEE Transactions on Electron Devices
At cryogenic temperatures, carrier mobility in bulk silicon exhibits a significantly different temperature dependence compared with that at room temperature. To capture this difference and accurately calculate cryogenic carrier mobility in technology computer-aided design (TCAD) simulation, we have developed a physics-based analytical mobility model. The proposed model is built upon two components: ionized impurity scattering and neutral impurity scattering. The ionized impurity scattering component is developed within the unified Klaassen’s mobility model framework, which also incorporates other scattering mechanisms such as lattice scattering and carrier–carrier scattering. To overcome the limitations of Klaassen’s model below 100 K, we incorporated the nonlinear screening effect and used the variable phase approach (VPA), a robust method for calculating minority impurity mobility. The neutral impurity scattering component adopts an existing practical model, which accurately captures the effect of scattering by neutral impurities at low temperatures. Our model exhibits good match to the experimental data on both majority and minority carrier mobility. Above 100 K, our model can be simplified to the original Klaassen’s mobility model, demonstrating its compatibility with the existing models at higher temperatures. In cryogenic bulk silicon simulations, our model exhibits good convergence performance and accuracy, making it applicable in cryogenic device simulations.