Every year, the EU emits 13.4 Mt of CO₂ solely from plastic production, with 99% of all plastics being produced from fossil fuel sources, while those that are produced from renewable sources use food products as feedstocks. In 2019, 29 Mt of plastic waste was collected in Europe. It is estimated that 32% was recycled, 43% was incinerated and 25% was sent to landfill. It has been estimated that life-sciences (biology, medicine, etc.) alone create plastic waste of approximately 5.5 Mt/yr, the majority being disposed of by incineration. The vast majority of this plastic waste is made from fossil fuel sources, though there is a growing interest in the possible use of bioplastics as a viable alternative for single-use lab consumables, such as petri dishes, pipette tips, etc. However, to-date only limited bioplastic replacement examples exist. In this review, common polymers used for labware are discussed, along with examining the possibility of replacing these materials with bioplastics, specifically polylactic acid (PLA). The material properties of PLA are described, along with possible functional improvements dure to additives. Finally, the standards and benchmarks needed for assessing bioplastics produced for labware components are reviewed.

The biodegradable biopolymer polylactic acid (PLA) has been used in the recent past in single-use packaging as a suitable replacement for non-biodegradable fossil fuel-based plastics, such as polyethylene terephthalate (PET). Under FDA and EU regulations, lactic acid (LA), the building block of PLA, is considered safe to use as a food contact material. The mechanical, thermal, and barrier properties of PLA are, however, major challenges for this material. PLA is a brittle material with a Young’s modulus of 2996–3750 MPa and an elongation at break of 1.3–7%. PLA has a glass transition temperature (Tg) of 60 °C, exhibiting structural distortion at this temperature. The water permeability of PLA can lead to hydrolytic degradation of the material. These properties can be improved with biopolymer blending and composites. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), for instance, increases the thermal stability of PLA while decreasing the water permeability by up to 59%. Polypropylene (PP) is one of the most common plastics in reusable food containers. This study will compare PLA-based blends and composites to the currently used PP as a sustainable alternative to fossil fuel-based plastics. The end-of-life options for PLA-based food containers are considered, as is the commercial cost of replacing PP with PLA.

The textile industry’s rapid growth and reliance on synthetic fibres have generated significant environmental pollution, highlighting the urgent need for sustainable waste management practices. Chemical recycling offers a promising pathway to reduce textile waste by converting used fibres into valuable raw materials, yet technical challenges remain due to the complex compositions of textile waste, such as dyes, additives, and blended fabrics.

Mass and heat rate dependant deposition of SiO₂ vapour species by controlled thermal degradation of PDMS on solid substrates.