State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
Auto-generated profile, based on publicly available information
Prof. Ding Chen
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
Significance: This work explores carbon aerogels with a three-dimensional interconnected nanofiber network and rationally designed hierarchical porous structures, which endow the supercapacitors (SCs) with both high energy density and long-term stability, with the goal of practical application. The as-constructed SCs have a high specific capacitance of 297 F ⋅ g –1 at 1 A ⋅ g –1 and remarkable energy density of 14.83 Wh ⋅ kg −1 at 0.60 kW ⋅ kg −1 , both of which are much higher than those of most carbon-based SCs. Significantly, they have an extremely high stability, with capacitance retention of 100% over 65,000 cycles, the best among carbon-based SCs.
Zirconium-iron metal–organic frameworks (Zr/Fe-MOFs) and Zr/Fe-MOF/graphene oxide (GO) composites were prepared via solvothermal synthesis using ferrous sulfate heptahydrate, zirconium acetate, and 1,3,5-benzenetricarboxylic acid. The MOFs and composites were measured using scanning electron microscopy (SEM), infrared spectrometry (IR), and thermogravimetric analysis (TGA). In this study, we explored the ability of Zr/Fe-MOFs and Zr/Fe-MOF/GO composites to adsorb tetracycline hydrochloride from an aqueous solution. Additionally, we optimized the adsorption performance by varying the ratio of MOFs and MOF composites to tetracycline hydrochloride solution, the concentration of tetracycline hydrochloride solution, and the pH of the solution. The results were investigated and fit to both pseudo-first-order and pseudo-second-order kinetic models. The results of the Freundlich and Langmuir isotherm models indicate that Zr/Fe-MOFs and Zr/Fe-MOF/GO composites have heterogeneous adsorption surfaces and that tetracycline hydrochloride is adsorbed over Zr/Fe-MOFs and Zr/Fe-MOF/GO by multilayer adsorption. Overall, our findings indicate that Zr/Fe-MOFs and Zr/Fe-MOF/GO composites can effectively treat wastewater, providing an inexpensive alternative to other methods.
In this study, four metal–organic frameworks (MOFs) were prepared using a simple, low-cost, and high-efficiency technique utilizing simple carboxylic acids and metal salts by microwave-assisted ball milling.
6 February 2017 in Journal of Materials Chemistry C
Graphene shows great promise as a transparent conductive electrode for optoelectronic applications. However, residues generated during the graphene transfer process lead to the degradation of device performance. Here, we show that a combination of UV/ozone pretreatment with the conventional process of graphene transfer can help in obtaining a large area graphene film with a clean surface on arbitrary substrates. In general, after CVD growth, a graphene film would be formed on both bottom and upper surfaces of a Cu foil. With UV/ozone pretreatment, a graphene layer with an undamaged and clean surface can be obtained, which is free of the residues. In addition, the quality of the obtained graphene can also be improved, which is revealed by the increase of the I2D/IG ratio from 2.0 to 3.6 for graphene films prepared without and with UV/ozone pretreatment, respectively. The transferred graphene films show higher transparency (97.5% at 550 nm), and the electron mobility (1178 cm2 V−1 s−1) can be improved by a factor of two compared to that prepared by the conventional transfer process (685 cm2 V−1 s−1). Considering its high efficiency, low cost, and easy scalability, the UV/ozone-assisted transfer method can be beneficial to the performance of graphene-based device applications such as transparent conducting electrodes.