Zirconium-iron metal–organic frameworks (Zr/Fe-MOFs) and Zr/Fe-MOF/graphene oxide (GO) composites were prepared via solvothermal synthesis using ferrous sulfate heptahydrate, zirconium acetate, and 1,3,5-benzenetricarboxylic acid. The MOFs and composites were measured using scanning electron microscopy (SEM), infrared spectrometry (IR), and thermogravimetric analysis (TGA). In this study, we explored the ability of Zr/Fe-MOFs and Zr/Fe-MOF/GO composites to adsorb tetracycline hydrochloride from an aqueous solution. Additionally, we optimized the adsorption performance by varying the ratio of MOFs and MOF composites to tetracycline hydrochloride solution, the concentration of tetracycline hydrochloride solution, and the pH of the solution. The results were investigated and fit to both pseudo-first-order and pseudo-second-order kinetic models. The results of the Freundlich and Langmuir isotherm models indicate that Zr/Fe-MOFs and Zr/Fe-MOF/GO composites have heterogeneous adsorption surfaces and that tetracycline hydrochloride is adsorbed over Zr/Fe-MOFs and Zr/Fe-MOF/GO by multilayer adsorption. Overall, our findings indicate that Zr/Fe-MOFs and Zr/Fe-MOF/GO composites can effectively treat wastewater, providing an inexpensive alternative to other methods.
Using a microwave-assisted ball-milling approach, Fe-based metal-organic frameworks (Fe-MOFs) were prepared from FeSO4·7H2O and trimesic acid. Scanning electron microscopy, Fourier-transform infrared spectrometry, X-ray, and thermogravimetric analysis were utilized to characterize the thermal stability and structure of the prepared Fe-MOFs. These Fe-MOFs were used to remove organic dyes from aqueous solutions. Specifically, they removed 96.97% of 23.3592 mg/L of Congo red in a 200 mL solution within 300 min of treatment with natural light at 15 °C. Likewise, 88.21 and 70.90% of 22.7527 mg/L of Orange II and 17.8326 mg/L of Rhodamine B, respectively, were removed from 200 mL solutions within 300 min of treatment at 15 °C. At 35 °C, 99.57, 95.98, and 99.38% of 23.3855 mg/L of Congo Red, 22.7365 mg/L of Orange II, and 17.9973 mg/L of Rhodamine B, respectively, were removed from 200 mL solutions within 300 min of treatment. The adsorption kinetics were investigated and the pseudo-first-order kinetic model was found to be superior to the pseudo-second-order kinetic model. Overall, using metal-organic frameworks to treat dye wastewater was found to be inexpensive, feasible, and efficient. Therefore, this material has future prospects in research and applications in the purification of wastewater.
This work studies the use of Fe/Ni-MOFs for the removal of ciprofloxacin (CIP) in wastewater. Fe/Ni-MOFs are prepared by the solvothermal method and characterized by X-ray diffraction (XRD), a scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and a thermal gravimetric analyzer (TG). Under the conditions of the concentration of 50 ppm, a mass of 30 mg, and a temperature of 30 °C, the maximum adsorption capacity of ciprofloxacin removal within 5 h was 232.1 mg/g. The maximum removal rate was 94.8% when 40 mg of the Fe/Ni-MOFs was added to the solution of 10 ppm ciprofloxacin. According to the pseudo-second-order (PSO) kinetic model, the R2 values were all greater than 0.99, which proved that the adsorption theory of ciprofloxacin by Fe/Ni-MOFs was consistent with the practice. The adsorption results were mainly affected by solution pH and static electricity, as well as other factors. The Freundlich isotherm model characterized the adsorption of ciprofloxacin by Fe/Ni-MOFs as multilayer adsorption. The above results indicated that Fe/Ni-MOFs were effective in the practical application of ciprofloxacin removal.
Fe-MOFs were prepared using a solvothermal method, and were characterized by scanning electron microscopy. We explored the application of Fe-MOFs as an adsorbing material for the removal of Rhodamine B (RhB) from aqueous solutions. The experimental data were simulated by dynamics and the results showed that the pseudo–second-order kinetics model was appropriate for analysis of RhB removal. We studied the adsorption capacity of MOF materials under different masses, concentrations, and pH conditions. When the pH was 6, the maximum adsorption capacity within 4 h was 135 mg/g. In summation, the removal of RhB from wastewater using MOFs is feasible, inexpensive, and effective. Hence, our findings indicate that MOFs have a broad application in the purification of wastewater.
Graphene oxide/metal-organic frameworks (GO/MOFs) have been prepared via solvothermal synthesis with ferrous sulfate heptahydrate, zirconium acetate and terephthalic acid for the purpose of removing organic pollutants from wastewater. The composites were analyzed using scanning electron microscopy, infrared spectrometry, and XRD. Tetracycline hydrochloride and orange II were implemented as model pollutants to evaluate the efficacy of the GO/MOFs in water purification, in which 50 mg of Zr/Fe-MOFs/GO was mixed with 100 mL of 10 mg/L, 20 mg/L, 30 mg/L, or 50 mg/L tetracycline hydrochloride solution and 25 mg/L, 35 mg/L, 45 mg/L, or 60 mg/L orange II solution, respectively. The removal efficacy after 4 hours was determined to be 96.1%, 75.8%, 55.4%, and 30.1%, and 98.8%, 91.9%, 71.1%, and 66.2%, respectively. The kinetics of pollutant removal was investigated for both tetracycline hydrochloride and orange II and excellent correlation coefficients of greater than 0.99 were obtained. The high efficacy of these MOFs in pollutant removal, coupled with their inexpensive preparation indicates the feasibility of their implementation in strategies for treating waste liquid. As such, it is anticipated that Zr/Fe-MOFs/GO composites will be widely applied in wastewater purification.