Continuous gradient triply periodic minimal surface (TPMS) porous structure has been proven to be one of the most suitable structures for bone implants due to their excellent mechanical properties and high porosity. This study establishes a parametric modeling method for continuous gradient TPMS structures and optimizes the TPMS porous structure with a continuous gradient change in porosity. Ti-6Al-4V continuous gradient TPMS porous structures were prepared using powder bed fusion (PBF). The mechanical properties and permeability of the continuous gradient TPMS porous structure were studied. The results indicate that the porosity control parameter C for gradient continuous change follows a linear function, with the porosity increasing linearly within the specified range of values. The influence of the periodic parameter ω on the mechanical properties and permeability of different types of TPMS structures varies. The Gyroid continuous gradient structure aligns more closely with the mechanical properties and permeability of bone scaffolds. Furthermore, a TPMS continuous gradient porous structure that is more suitable for trabecular bone implants was obtained through topology optimization design. A bone implant model and object suitable for human trabecular bone were designed and printed, providing technical support for subsequent performance testing and application research of bone implants.
High-entropy alloys (HEAs), as a novel class of materials, have attracted widespread attention in the field of materials science due to their unique multi-element high-concentration mixing design. Recent research has found that this alloy mixing strategy not only exhibits excellent performance in structural properties but also shows potential in functional materials. This review summarizes the progress of research on HEAs in the magnetocaloric effect (MCE) area, first introducing the basic principles of MCE and the related concepts of HEAs. It then summarizes the research progress of rare-earth HEAs, non-rare-earth HEAs, and rare-earth-transition metal composite HEAs in MCE. Finally, this review outlines future research directions for HEAs in the MCE field, laying the groundwork for further applications of HEAs in the magnetocaloric field.
In this article, a 6 mm thick high-strength steel (HSS) was butt laser-MAG welded using nickel alloy wires as the cladding layer. By preparing the cladding layer on the groove, the microstructure and properties of the weld were adjusted. OM, XRD, SEM, and tensile and impact experiments were used to study the structure and mechanical properties of the welded joints. The results show that the weld structure with the cladding layer corresponds to austenite, while the microstructure of the conventional laser arc hybrid welded joint is a combination of austenite and martensite. Additionally, the tensile specimens of the welded joint are fractured at the weld. The fracture strength of the nickel alloy layer is 809 MPa, and the fracture strength of the conventional laser arc hybrid welded joint is 1149 MPa. The low temperature toughness (−40 °C) of conventional laser arc hybrid welded joint is 6.2J. The low temperature toughness (−40 °C) of prefabricated welded joints with laser-filled cladding has increased to 40.8 J, and this proves to be an effective method to improve the low temperature toughness of the welded joint.