Investigating the wind-induced vibration response of the greenhouse structure, and the wind pressure distribution on its surface takes on a critical significance when the main structure is under large wind loads. A computational fluid dynamics-based study was conducted, and wind tunnel tests were performed to study the wind pressure distribution on the surface of the greenhouse structure. First, three types of greenhouses, including Venlo, Round-arch, and Saw-tooth type greenhouses, were selected as the design models for the study. In addition, the double-span, four-room structure model was built to explore the wind pressure distribution and the extreme wind pressure coefficient on the greenhouse surface for 13 (0°–180°, every 15°) directions of the wind direction to obtain the wind load characteristics in the greenhouse surface under different conditions. The results of the wind tunnel tests were consistent with those of the simulations, with the maximum wind pressure in the X-direction occurring at 30°-wind and the maximum wind pressure in the Y-direction at 75°-wind. The maximum negative wind pressure acting locally on the roof of the greenhouse was twice the maximum positive pressure acting on the windward side of the greenhouse. Accordingly, it is necessary to strengthen the structure in regions sensitive to wind direction with significant response to wind.
A novel indoor positioning method for a pigsty based on ultra-wideband (UWB) technology is proposed via reasonably arranging the base stations and positioning tags, which can provide strong support for the accurate positioning of specific pig pens in the pig house. The distribution of Dilution of Precision (DOP) values is analyzed in different deployment schemes which include the amount, the height, the deployment shape, and the distance of the base stations through positioning simulation. Moreover, the positioning effect of dynamic following positioning, the root-mean-square error (RMSE), and the variance of static positioning are measured. It is noteworthy that the Kalman filtering algorithm is adopted to smooth the dynamic following positioning experimental data for reducing the positioning error. The simulated results show that the DOP values decrease with the increase in height and distance, and these results and laws are consistent with the experimental results. However, the DOP values are best reached when the height is from 1.75 m to 2.75 m, and the distance is over 3.00 m. Furthermore, the DOP values of quadrilateral deployment are smaller than the ones of triangular deployment. In addition, the variance of static positioning and dynamic following positioning is decreased by utilizing the Kalman filtering algorithm. Therefore, the excellent positioning system and its solutions in a pigsty can be provided by our proposed indoor positioning method.
The promotion and use of liquid feeding face the challenge of insufficiently stable delivery. This issue can be resolved, in part, by using the spiral flow produced by a spiral pipe (SPP). The aim of this study is to investigate how the structural characteristics of the spiral pipe affect the flow state of the liquid feed, and for this purpose, the computational fluid dynamics (CFD) technique has been employed and the liquid feed delivery process has been simulated by means of an Eulerian two-fluid model The results reveal a significant improvement in the slurry’s homogeneity as it traveled through a spiral pipe compared with a straight pipe (STP). The swirl number normally increased with the number, length, height, and angle of the spiral pipe’s guide vanes. The solid-phase distribution was more homogeneous when values of N = 1, L = 1D, H = 3/8R, and θ = 20° were used, respectively, and the COV within 10D downstream of the outlet of the spiral pipe was 3.902% smaller than that of the straight pipe. The results of this study can be used as a reference for the design of liquid feed-conveying pipes.
An novel indoor positioning method of pigsty based on Ultra Wideband (UWB) technology is proposed via reasonably arranging the base stations (BTS) and positioning tags, which can provide a strong support for the accurate positioning of specific pig pens in the pig house. The distribution of Dilution of Precision (DOP) values are analysed in different deployment schemes which includes the amount, the height, the deployment shape and distance of BTS, though positioning simulation. Moreover, the positioning effect of dynamic following positioning (DFP), the root-mean-square error (RMSE) and variance of static positioning (SP) are measured. It is noteworthy that Kalman filtering algorithm is adopted to smooth the DFP experimental data for reducing the positioning error. The simulated results show that the DOP values decrease with the increasing of the height and the distance, and these results and laws are consistent with the experimental results. However, the DOP values are reached best when the height is from 1.75 m to 2.75 m, and the distance is over 3.00 m. Furthermore, the DOP values of quadrilateral deployment is smaller than the one of triangle. In addition, variance of SP and DFP are decreased by utilizing Kalman filtering algorithm. Therefore, the excellent positioning system and its solutions in pigsty can be provided by our proposed indoor positioning method.