Chengmenshan copper mine, located at Jiujiang city in the Jiangxi Province, is a rarely lakeside open-pit mine in China. Since the open-pit is very close to Sai Lake, the seasonally changed water level and the distance between lake and slope have great influence to the stability of open-pit slope. Based on the drill data and geological sections, a numerical model of the slope is built. With the fluid-mechanical interaction associated, the stability of the slopes is numerically analyzed, in which different lake water levels and lake-slope distances are taken into consideration. The comparative analysis shows that a larger lake-slope distance can promise better slope stability and weaken the sensitivity of slope stability to water. The stability of slopes with different heights is analyzed to find that the stability weakens and the sensitivity is enhanced with the height increasing. To the most serious situation, the slope height and the lake water level being 238 m and 17.2 m, respectively, theFsvalue equals 1.18945 which is extremely closed to the allowable safety factor of 1.20 for slope design. According to the minimumFsfor slope design, the minimum distance between lake and open-pit slope is found to be 60 m.

Although the current ecological engineering technology can reinforce shallow landslides, it cannot reinforce deep landslides. A new type of ecological engineering technology-living tree stump slope protection was developed, aiming at the deficiency of current ecological engineering technology. For living stumps with different tap root lengths, the mechanical properties of the living stump slope and root system were analyzed. The model was based on the finite element method, using the Mohr-Coulomb failure criterion to consider the mechanical plasticity of the soil. The three-dimensional (3D) models of living stumps with different tap root lengths were simulated by embedded beam elements. Changes in stress and strain of soil and root system were simulated. The strength reduction method was used here to calculate the safety factor of the slope. The results showed that long taproots moved the soil shear stress area to deeper soil layers, increasing the stability of the slope. The root system in the middle and lower part of the slope mainly exerted its tensile strength and played a positive role in the stability of the slope. The longer the taproots, the more stable the slope. Slope stability may be affected by root length, spatial root morphology, and the spatial layout of the root system on the slope. Planting living stumps in the middle and lower part of the slope densely was recommended in ecological engineering.