In the selective laser melting (SLM) process, the experimental approach to determine the optimal process parameters is labor-intensive, material-intensive, and time-consuming. The use of simulation methods also requires more time support and higher hardware requirements. In this paper, a three-dimensional transient heat transfer model and a neural network optimization process parameter model in the process of preparing copper alloys by SLM are developed by combining finite element simulation methods with neural network prediction. The thermal behavior of the multitrack molten pools was investigated by ANSYS APDL, and the effects of different laser powers and scanning speeds on the temperature field and structure dimensions of the molten pools were discussed. The results show that the current single-track has a significant preheating effect on the unmachined single-track and a reheating effect on the machined single-track during the multitrack forming process. The laser power and scanning speed can be controlled to regulate the temperature, 3D size, and heat spread area of the molten pool to avoid over-melting and under-melting. The accuracy of the temperature field model was verified by single-track experiments. A neural network prediction model was constructed to predict the maximum temperature and size of the molten pool by optimizing the backpropagation neural network with a genetic algorithm, providing a methodological guide for the study of SLM process parameters.
A heat-affected zone significantly reduces the mechanical properties of carbon fiber-reinforced plastics (CFRP). However, the beam quality, especially the stability of the beam pointing, limits the heat-affected zone (HAZ) minimization studies. In this study, the HAZ is reduced by improving the pointing stability of the laser beam. A beam pointing stabilization system (BPSS) based on position-sensitive devices and fast steering mirrors (FSMs) was developed. The research focuses on building a control model from the position-sensitive devices’ position deviation signals to the FSMs’ corrected control angles. The control model can detect and predict the beam pointing deviations and correct the attitudes of the FSMs to correct the beam pointing deviations, improving the beam pointing stability. The performance of the proposed BPSS and the corresponding control model were experimentally verified. The results indicate that the pointing deviations of the corrected beam in the X and Y directions are reduced by 78.08% and 70.28%, respectively. Additionally, the HAZ of CFRP processed with the corrected laser is reduced by 30.8%. The quality of the laser cutting of CFRP is significantly improved.
Experimental and numerical simulations are used to study the effects of dent damage on the residual strength of stiffened panels under uniaxial compression. Firstly, through the quasi-static lateral loading test, a dent with specified shape and location is imposed on the stiffened panels. Then, in order to analyze the effect of the dent damage on the residual strength of the stiffened panels, uniaxial compression tests of the intact stiffened panels and the stiffened panels with the dent damages are carried out under simply supported boundary conditions. The results show that the residual strength of the stiffened panels is reduced by the dent damage. The nonlinear finite element software ABAQUS is used to simulate the response of the panels, and the residual strength of the stiffened panels is obtained. The experimental results are in agreement with the numerical results, and have verified the numerical simulation. On this basis, further studies on the effects of parameters, such as the depth and area of the dent on the residual strength of the stiffened panels are carried out by means of numerical simulations.