Márcia Cristina dos Santos

Ms. Márcia Cristina dos Santos

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 September 2024 in Energies
Verified
Journal Article
Open access
PDF file
Márcia Cristina dos SantosMárcia Cristina dos Santos
Márcia Cristina dos Santos
AMAna Carolina Morim
Ana Carolina Morim
MVMariana Videira
Mariana Videira
Flávio SilvaFlávio Silva
Flávio Silva
MMManuel Matos
Manuel Matos
Luis TarelhoLuis Tarelho
Luis Tarelho
In this work, the pyrolysis process and the characteristics of biochar produced using a bench-scale fixed-bed reactor and a prototype-scale auger reactor were studied. Residual forest biomass (RFB) from acacia, broom, gorse, and giant reed was used as feedstock. Besides information on pyrolysis characteristics of these specific biomass species from the Iberian Peninsula, new knowledge on the understanding of how results from small-scale reactors can be used to predict the behavior of higher-scale and continuous-operation reactors is offered. Batch pyrolysis was carried out using 40 g of biomass sample in a fixed-bed reactor with a heating rate of 20 °C∙min−1, pyrolysis temperature of 450 and 550 °C, and a residence time of 30 min, while for the continuous process it was used a prototype of an auger reactor with continuous operation with a biomass flow rate up to 1 kg/h, with temperatures of 450 and 550 °C, and a solids residence time of 5 min. The biochar yield was in the range of 0.26 to 0.36 kg/kg biomass dry basis, being similar for both types of reactors and slightly lower when using the auger reactor. The proximate analysis of the biochar shows volatile matter in the range 0.10 to 0.27 kg/kg biochar dry basis, fixed carbon in the range 0.65 to 0.84 kg/kg biochar dry basis, and ash in the range 0.04 to 0.08 kg/kg biochar dry basis. The carbon, oxygen, and hydrogen content of the biochar was in the range of 0.71 to 0.81, 0.09 to 0.22, and 0.02 to 0.03 kg/kg biochar dry basis, respectively. The results show that the up-scaling of the reactor and regime of operation does not have an important influence on the yield and characteristics of the biochar produced. The biochar obtained in the two types of reactors has characteristics appropriate for environmental applications, such as an additive to improve soil properties. It is possible to see that the characteristics of the biochar are influenced by the type of biomass and the conditions and parameters of the process; therefore, it is of major importance to control and know of these conditions, especially when considering upscaling scenarios.

1 November 2018 in Process Safety and Environmental Protection
Verified
Journal Article
Closed access
RFR. Felisberto
R. Felisberto
Márcia Cristina dos SantosMárcia Cristina dos Santos
Márcia Cristina dos Santos
Sabrina ArcaroSabrina Arcaro
Sabrina Arcaro
TBT.M. Basegio
T.M. Basegio
CBC.P. Bergmann
C.P. Bergmann

3 December 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
AMAna Carolina Morim
Ana Carolina Morim
Márcia Cristina dos SantosMárcia Cristina dos Santos
Márcia Cristina dos Santos
Luis TarelhoLuis Tarelho
Luis Tarelho
Flávio SilvaFlávio Silva
Flávio Silva
The increasing challenges posed by climate change demand efficient strategies to mitigate soil degradation. Valorization of low-grade residual forestry biomass (acacia) into biochar could be used as a soil amendment strategy. A short-term incubation assay was conducted in forest soil, where the effects of biochar produced at two pyrolysis temperatures (450 °C and 550 °C) with varying particle sizes (S < 0.5 mm, M = [0.5; 3.15], L > 3.15 mm) and application rates (0, 3, 6 and 10% (w/w)) were assessed. Organic matter was analyzed through the water-soluble carbon, hot-water-extractable carbon, and microbial biomass. Microbial activity was evaluated by measuring the soil respiration and metabolic quotient. Biochar application increased the water-soluble carbon by 21 to 143% and the hot-water-extractable carbon by 27 to 137%, while decreasing the microbial biomass to 86%. The soil respiration and metabolic quotient increased in all the conditions, indicating an increase in microbial activity but low efficiency in carbon mineralization. This suggests the inefficient acclimatization of the microorganisms to biochar, lowering their ability to co-metabolize the recalcitrant carbon. Additionally, the potential adsorption of beneficial nutrients onto the biochar could have inhibited their release into the soil, hindering microbial growth. Increased biochar application rates resulted in adverse effects on microbial communities, indicating possible inhibitory effects on the soil biota.

6 August 2019
Verified
Book Chapter
Closed access
PDF file
TRTania Maria Hubert Ribeiro
Tania Maria Hubert Ribeiro
Márcia Cristina dos SantosMárcia Cristina dos Santos
Márcia Cristina dos Santos

18 November 2023 in Energies
Verified
Journal Article
Open access
PDF file
AMAna Carolina Morim
Ana Carolina Morim
Márcia Cristina dos SantosMárcia Cristina dos Santos
Márcia Cristina dos Santos
Luis TarelhoLuis Tarelho
Luis Tarelho
Flávio SilvaFlávio Silva
Flávio Silva
Forestry management operations that are designed to prevent wildfires while also protecting the environmental compartments that are directly affected by them, such as soil, are of major relevance. The valorization of residual forestry biomass into biochar that is then used to be turned back into forest soils is an approach that meets Circular Economy principles. However, the effects on soil of the application of biochar that is produced from low-grade forestry biomass are unknown. In this work, a soil incubation assay was performed with a sandy soil that was amended with biochar produced from residual forestry biomass (Acacia) to assess its effectiveness in terms of boosting soil quality. The factorial study comprised the effects of biochar at two pyrolysis temperatures (450 °C and 550 °C), four application rates (0%, 3%, 6%, and 10% (w/w)), and three particle size classes (S < 0.5 mm, M = [0.5; 3.15], and L > 3.15 mm). The soil pH increased for all treatments to suitable agronomic values (5–7), and the water-holding capacity increased by 69% to 325% when compared to the control soil. The bioavailability of the plant nutrient elements also increased with the application rate, especially for treatments with small particles of biochar. Biochar that is made of low-grade biomass from forestry maintenance operations can be efficiently recycled back into forest soils to improve the physicochemical properties of agronomic relevance, thus allowing for a reduced water demand and better soil quality. However, studies on biochar applications in different soils are needed in order to assess the effectiveness of this approach.

1 January 2022
Verified
Book Chapter
Open access
FSFlávio C. Silva
Flávio C. Silva
Márcia Cristina dos SantosMárcia Cristina dos Santos
Márcia Cristina dos Santos
JMJéssica Moura
Jéssica Moura
ABAna C. Vilas Boas
Ana C. Vilas Boas
MMManuel A. Matos
Manuel A. Matos
LTLuís A.C. Tarelho
Luís A.C. Tarelho
Forest management operations adequately integrated in the forestry value-chain are the gold standard in wildfire prevention. However, these operations generate considerable amounts of residual forest biomass (RFB) that cannot be legally disposed in land and further require suitable management. Residual biomass also includes highly flammable plants existing in the Portuguese forest such as gorse, broom, giant reed and acacia. Quite often wildfires in Portugal are linked with spreading of this residual biomass that promotes fuel accumulation. Besides deleterious impacts on rural and forestry economy, wildfires are also a driver for desertification and soil degradation. Alternative uses for this residual biomass to promote its valorisation and enable proper models of management of forest areas are needed, thus providing economic and environmental benefits towards decreasing of the fuel load. Though this biomass has reasonable carbon content and heating value, they also present inorganic composition (e.g. Na, K, Cl) that promotes operating problems in thermochemical conversion processes as combustion and gasification for useful energy production because of ash related problems (e.g., sintering/fouling), thus restricting their use in such applications. As such, biochar production by pyrolysis is a potential alternative to generate added-value. During pyrolysis the volatile matter of biomass is released to the gaseous phase, resulting a solid product, biochar, which is carbon-rich and contains most of the inorganics (nutrients) of the raw biomass. Exposure of biomass inorganics as free ashes is prevented in this process, and hence pyrolysis mitigates their negative effects. Nonetheless, the efficient pyrolysis of these types of biomass requires development of novel solutions optimized for energy and environmental performance. Enhancing of the energetic sustainability of the process and minimizing of the environmental impacts associated to the emission of gaseous pollutants are aspects of major relevance. Additionally, the biochar quality depends on biomass type, technology and operating conditions used. The BioValChar project (https://biovalchar.web.ua.pt/en/) seeks to answer these challenges related to valorisation of low-quality residual biomass through production of biochar by pyrolysis, which can return back to forest and rural soils. This approach will provide both carbon/nutrient cycling and synergies within forestry management, wildfire prevention, improvement of soil quality and rural development, under the circular economy principle. The research focus valorisation of residual forest biomass in full-control pyrolytic batch and continuous (auger-type reactor) processes, and testing of the resulting biochar performance as soil amendment. Moreover, a prototype of an integrated mobile unit for auto-thermal and continuous biochar production by pyrolysis of biomass is also being developed, by using the pyrolysis gases to provide the energetic needs of the process. Here we present the project overview, as well as some preliminary results on pyrolytic valorisation of one selected biomass (acacia) into biochar through distinct operating modes and conditions.