High pressure can drastically alter chemical bonding and produce exotic compounds that defy conventional wisdom. Especially significant are compounds pertaining to oxygen cycles inside Earth, which hold key to understanding major geological events that impact the environment essential to life on Earth. Here we report the discovery of pressure-stabilized divalent ozonide CaO3 crystal that exhibits intriguing bonding and oxidation states with profound geological implications. Our computational study identifies a crystalline phase of CaO3 by reaction of CaO and O2 at high pressure and high temperature conditions; ensuing experiments synthesize this rare compound under compression in a diamond anvil cell with laser heating. High-pressure x-ray diffraction data show that CaO3 crystal forms at 35 GPa and persists down to 20 GPa on decompression. Analysis of charge states reveals a formal oxidation state of −2 for ozone anions in CaO3. These findings unravel the ozonide chemistry at high pressure and offer insights for elucidating prominent seismic anomalies and oxygen cycles in Earth’s interior. We further predict multiple reactions producing CaO3 by geologically abundant mineral precursors at various depths in Earth’s mantle.
Expanded polystyrene (EPS) particles are commonly used for thermal insulation in lightweight building materials due to their low density, low thermal conductivity, and affordability. However, shortcomings such as hydrophobicity and poor fire safety limit the application of EPS. Bio-based flame retardants have been developed for use in polymer composites due to their renewable, environmentally friendly, and non-toxic properties. In this study, to improve the hydrophilicity and fire resistance of EPS particles, phytic acid (PA)/chitosan (CS)–polydopamine (PDA)@EPS particles (PA/CS-PDA@EPS) with a bio-based coating were prepared by using a simple coating method based on PDA@EPS particles using PDA as an adhesive and PA and CS as bio-based flame retardants. The results showed that the modified EPS particles had good hydrophilicity, the residual carbon yield of the 10PA/3CS-PDA@EPS samples was increased to 24 wt%, and the maximum loss rate was reduced by 69% compared with unmodified EPS. In flammability tests, the 10PA/3CS-PDA@EPS samples also demonstrated low flame spread and some fire resistance. Furthermore, the modified EPS particles exhibited fire resistance even after multiple washings. The hydrophilic and fire-resistant modified EPS particles are anticipated to offer a novel approach to the advancement of EPS-based lightweight building materials.