A facile hydrothermal route to control the crystal growth on the synthesis of Co3O4 nanostructures with cube-like morphologies has been reported and tested its suitability for supercapacitor applications. The chemical composition and morphologies of the as-prepared Co3O4 nanoparticles were extensively characterized using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Varying the temperature caused considerable changes in the morphology, the electrochemical performance increased with rising temperature, and the redox reactions become more reversible. The results showed that the Co3O4 synthesized at a higher temperature (180 °C) demonstrated a high specific capacitance of 833 F/g. This is attributed to the optimal temperature and the controlled growth of nanocubes.
In the present study, the pyrolysis behaviour of Capsicum Annuum stem Waste (CAW) was studied applying thermogravimetric analysis to evaluate the intrinsic kinetic parameters to develop a pyrolysis reactor for utilizing CAW. The thermal decomposition of CAW was achieved between 373 – 1173 K under inert conditions at different heating rates of 10, 20, and 30 K min-1. Model-free kinetic methods like Kissinger-Akahira-Sunose (KAS), Ozawa Flynn Wall (OFW) and Coats Redfern methods were applied to work out the kinetic parameters. To identify the utility of CAW and its biochar, physio-chemical characteristics such as proximate and ultimate analysis, scanning electron microscopy, and Fourier Transform Infrared analysis are reported.
Tellurium is used in cadmium tellurium-based solar cells. Mercury cadmium telluride is used as a sensing material for thermal imaging devices. High-purity tellurium is used in alloys for electronic applications. It is one of the important raw materials for solar energy applications. It is used as an alloying element in the production of low-carbon steel and copper alloys. Tellurium catalysts are used chiefly for the oxidation of organic compounds and as vulcanizing/accelerating agents in the processing of rubber compounds. Even though several researchers tried to recover tellurium from different raw materials, there is no attempt to develop a process flow sheet to recover tellurium from waste anode slime having a high tellurium concentration. In this study, optimum conditions were developed to recover Te and Cu from anode slime with the composition Cu: 31.8%, Te: 24.7%, and As: 0.96%. The unit operations involved are leaching, purification, and electro winning. The optimum conditions for producing Te at a recovery of 90% are found to be roasting of anode slime at 450 °C without the addition of soda ash followed by leaching in 1 M NaOH at 10% pulp density for 2 h. The purity of Te metal achieved was up to 99.99%, which could provide a sustainable energy future. The major impurities of the tellurium are observed to be in the order: Se > Sb > As > Cu.
6 April 2022 in Journal of Materials Engineering and Performance